Question about 2005 Nissan Frontier

1 Answer

How do you remove the tail light assembly to change bulbs on a 2003 frontier sc.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,741 Answers

There are two phillips-headed bolts on each inside corner of the truck bed, behind the tailgate latches, that may be used to attach the brackets for the optional bed extender. If you have a bed liner installed, you will need to pull the corner of the liner back to expose the bolts.The factory bed liner needs to be flexed around the upper cargo hook to gain access to the two hex head screws that hold the tail-light housing against the body.Remove the screws so the tail light housing gets loose and easily comes out. this will help.please keep updated for further assistance if more help required. thanks.

Posted on Apr 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tail light bulb


There are removable covers inside both sides of the hatch. You will need to gently pry them back with a flathead screwdriver wrapped in a cloth, to expose the two bolts that hold the tail light assembly to the vehicle. Then remove the two bolts, pull the assembly away so you can reach the bulb socket, turn it counter clockwise and pull the socket assembly with bulb out. Remove and replace the bulb (use the cloth to install the new bulb, don't touch it). Reverse for reassembly.

May 01, 2012 | 2003 Acura MDX

1 Answer

How to replace the fog bulb 2001 nissan frontier


it's easy just done it last night. unplug the wiring harness that goes to the fog light and then there is a bolt on the bottom of the fog light take it out and push the fog light forward and the hole assembly comes out just take off the back and change the bulb. my truck is a 2001 nissan frontier sc 4x4 and it took the h3 bulbs, got mine at wal-mart about $4.00

Read more: http://wiki.answers.com/Q/How_do_you_replace_the_light_bulb_in_a_2001_frontier_fog_light#ixzz1Lt4sxMGk

May 09, 2011 | Nissan Frontier Cars & Trucks

1 Answer

How do i change brake light bulb on 2003 nissan murano


To change any of the three tail light bulbs, open rear hatchback locate the thin black strip (approx. 2"W x 21"L) between the body and the tail light assembly. Next, simply pry off black strip with a small screwdriver wrapped with a rag as to not chip the paint (strip is held on by two clips). Remove the top and bottom bolts (the 2 middle bolts don't need to be removed). Next grab the lens assembly from the top and bottom and gently pull away from the body. Once the lens is separated from the vehicle simply twist the bulb socket counterclockwise to remove the bulb from the lens assembly.

Sep 15, 2010 | Nissan Murano Cars & Trucks

2 Answers

Change brake light bulb on a 2000 Nissan Frontier


The entire bed line will need to be removed. The long screws that hold the metal bracet where the bed extender attaches also hold the tail light assembly in place.
I pulled the bed liner up at a 45 degree angle and layed it on top of the cab. This revealed the screws. Take both screws out and lay to the side along with the metal bracket for the bed extender.
Now firmly grab the edges of the tail light assembly and pull...there are 2 hard rubber nipples that snap in to hold the assembly. You will feel like you might break it but you won't..just pull straight back hard. The assembly will "POP" out and then you can just twist the back of each bulb there are (3) and pull out..now you will see the bulbs..just pull the bad bulb straight out and push the new one into place. Now just reassemble. Total time will be 30-45 min. for this repair.

Mar 30, 2010 | 2000 Nissan Frontier

1 Answer

2004 brake light out (red section) how do I


Not familiar with this model, however see if there are bolts or screws on the side of the tail lamp assembly when you open the tail gate.  Once you remove screws, entire taillamp assembly will come out, and you can then get to back side of tail light to replace bulbs.  This is normal bulb replacement for other pickups like toyota, ford.  Hope this helps!!

Nov 12, 2009 | 2004 Nissan Frontier

2 Answers

How to get in to replace a rear tail light stop light on a 2000 frontier Nissan Pickup. Where are the bolts, or screws that release the plastic covers?


look for screw inside the bed area, adjacent to the tailight covers. Remove two screws, and the taillight assembly pulls out

Aug 06, 2009 | 2000 Nissan Frontier

1 Answer

How do i change the bulb for my rear tail light?


Open up the trunk and pull back the "carpeting" around the inside of the trunk in the area of the tail light. You may have to remove some tabs and or plastic screws to do this. Once the "carpeting" is pulled back you can get to the three bolts holding the tail light to the body. After removing the screws, gently wiggle the tail light assembly from the body of the car and look for any hooks the may hold the tail light in place. They won't stop you from removing it, but they do hold onto it. They are mostly there for alinment when installing the tail light. The bulbs should be in twist off plugs.

Aug 05, 2009 | 2002 Lexus SC 430

1 Answer

How do I remove the tail light assembly of 2003 Mazda minivan?


open up the hatch and go inside and remove the panel close to the light and remove the nuts or screws to get access to the bulb inside the light assembly

Jan 29, 2009 | 2003 Mazda MPV

1 Answer

Replacing rear turn signal bulb in 2003 Mustang


remove the trim panel at the very rear of trunk, remove it and place it out of the way, remove tail light Assembly retaining nuts top and bottom, I think there are 6 per side, pull the tail light assembly straight back to access the bulbs for replacement.

Dec 04, 2008 | 2003 Ford Mustang

2 Answers

I have a brake light out.How do you get to those things. This is a 1998 nissan frontier


do you have a bed liner?? if so, you need to move the bed liner away from the rear lights in back to access the screws that hold the tail light in. on the side of the bed right by the tail light are 2 screws holding the light in. remove screws, remove tail light replace bulbs, re-assemble.

Jul 22, 2008 | 2005 Nissan Frontier

Not finding what you are looking for?
2005 Nissan Frontier Logo

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...