Question about 1993 Ford Probe

1 Answer

My probe gt is in time has spark turns over but wount start and is geting the rite amount of fuel presure

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 453 Answers

Has a MAF sensor? It could be bad which will cause the car to act like you described.

Posted on May 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a1996 ford probe gt 24 valve it cranks over but won't start


First check for spark at the spark plugs. If you are getting spark, then check for fuel pressure at the fuel rail (shrader valve). If you have spark and fuel you may have a vacuum leak or a timing issue.

May 02, 2017 | Ford Cars & Trucks

2 Answers

I have a no start with a 1996 Ford Probe GT 2.5. She turns over, has fuel and spark


If you are sure you have fuel and spark the only other posibilty is engine damage. The most likely is a broken timing belt and the cams are not turning.. Go back and check that fuel and spark again.. Don't look for major problems until you have really checked.. Squirt a little fuel into the intake manifold ahead of the throttle body.. If it fires you have spark and no fuel.. The computer may not be telling the injectors to open.. I had this problem once on a chevrolet and it turned out to be a clooged fuel filter.. buying gas in Mexico.

May 12, 2014 | 1996 Ford Probe

1 Answer

My 97 eclipse gs studders when u give it gas then it takes off any ideas?


comon things are air filter fuel filter but it is very possible your fuel pump maybe working but geting worn and not supplying the rite amount of fuel presure. also the throttle positioning sencor.....

Oct 04, 2011 | 1997 Mitsubishi Eclipse

1 Answer

MY 1985 FIERO GT V6 CRANKS BUT WILL NOT START. IT SAT WITHOUT BEING RUN FOR 2 YEARS. IT STARTED UP FOR ABOUT WEEKS AND NOW WHEN I TURN THE KEY ON IT JUST CRANKS BUT WON'T START . HAD FUEL PRESSURE...


More than likely since the car sat for so long with fuel in it that it separated. There is water in fuel and when it sits for an extended amount of time it will rust in side the tank and get into your fuel lines and even your fuel pump. First thing you could do is by some fuel treatment and run it through. it should hopefully break up anything inside there that could be impeding the fuel from getting into the carb.
Also check the leads inside the distributor. when a car sits for that long the seals can dry out and allow moisture in, corroding them and not allowing a spark to enter the cylinder and ignite the fuel.
Just remember that a car needs only three things to run 1. Spark 2. Fuel 3. Air
If you have all of those then the car will should start. Hope this helps. Good luck.

Aug 31, 2011 | Pontiac Fiero Cars & Trucks

1 Answer

My 2000 jeep grand cherokee doesnt turn on i changed camshaft sensor crank position sensor and fuel pump still not functioning what is it


You Need to Know If it Is 1,Getting Spark , 2. Has FUEL Proper PRESSURE, 3, you Have Check For A Timing Chain Problem as in (JUMPED TIMING) Any Millage Above 75,000 Makes it a Candidate For Timing Chain Stretching thus Causing it to Jump Out of timing and When It Does this It >>WILL HAVE SPARK AND PROPER FUEL PRESURE)<< To Check Remove #1 Spark Plug and Bar/Turn over Engine (>MANUALY Slowly Until #1 Piston Is at TDC TOP DEAD CENTER) Determine this By Using a Long STRAW Inserted In the Spark Plug Hole and Feel top Of Piston as it Moves Up When it gets ALL THE WAY UP<< Look @ the Timing Indicator Markings At BOTTOM PULLEY and If It Is NOT LINED UP It HAS Jumped Time, Repeat this 2 TIMES WITH 2 CONSECUTIVE Rotations Of the Bottom Pulley to Be SURE of The Discovery.

Oct 20, 2010 | 2000 Jeep Grand Cherokee

2 Answers

Turns over but will not start. It has gas in it.


first off you need to make sure they fuel is getting presure at the fuel rail, look for the shrader valve, it looks like the air stem on your tire, turn the key on and off a few times with out trying to start it this will give you an idea if there is fuel presure in the lines, this is not a fuel presure test and your presure could be low and causing the no start, also get a spark tester and put in on each spark plug wire and make sure you have spark also, if you are laking any of the above you should test accordingly

Mar 01, 2010 | 1998 Ford Explorer

1 Answer

My accord has spark but the spark plugs r not geting gas


if fuel presure is good u most likey have a ignition module/pickup assembley,believe they come together(made together) this controls spark and pulses the injectors

Jul 03, 2009 | 1989 Honda Accord 4 Door

2 Answers

1995 Ford Probe GT no spark


Hi is your Probe a 2.5cc 24valve.If it is then you may need to check the CPS(crank position sensor) All the best.Phil

Aug 17, 2008 | 1995 Ford Probe

Not finding what you are looking for?
1993 Ford Probe Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...