Question about 2001 Ford Escape

Open Question

2001 Ford Escape - removing headlight assembly to change directional light bulb.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Removing Headlight assembly

There is a small hex headed fastener behind the headlight, oriented vertically. Loosen this and remove it, it is long and passes through the body of the light housing to threads below. You then pull the headlight housing forward, its still held in place by several friction fasteners so it may take a little force but it will "pop" off and then when you're through you'll have to "pop" in back in.

Posted on Jan 13, 2009

  • 1 Answer

SOURCE: how to change headlight bulb on ford mondeo

Very easy, 2 or 3 minutes.
Remove radiator grille. 2 plastic fittings on top, quarter turn and lift out grille.
Remove complete headlight. Simply lift out 2 L shape retaining pins. Disconnect lead. Ease out complete headlamp unit.
Remove back of headlamp unit to access bulbs. Disconnect lead from bulb while bulb still held by clip. Then release clip to remove bulb.
Reverse process to fit.

Posted on Feb 22, 2009

  • 491 Answers

SOURCE: replace headlight bulb for 2005 ford escape

you take out bulb from inside the engine compartment

Posted on Jun 09, 2009

  • 6 Answers

SOURCE: headlight went out in 2003 ford escape i have

you have to remove the whole headlight assembly, then pop off the front cover pull the old bulb out and put the new one in. reverse the process to re-install. there is a small plastic tab on the topfront of the headlight assembly, that is what you need to release to get the clear cover off and get inside.

Posted on Oct 07, 2009

  • 1 Answer

SOURCE: How do I change the headlight bulb on a 2003 Mazda6

Just went to my local store - they sell the bulbs and fit them while you wait...the guy does a lot of them - he had it done in 10 minutes and charged 12 pounds including the bulb. I watched him do it - twisted the cover off - popped the bulb out and popped the new one in ...he didn't actually unbolt anything from the car...worst of all it was dark and raining...I'd suggest this route unless you have small hands or are willing to spend an hour fiddling around

Posted on Nov 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Headlights wont work and dash and parking lights come when ignition switch is turned on. sometimes jiggling wires works. what is the problem?


Check out related help links with solutions to troubleshoot these problem.
Click the link below directly:---
Heater fan and headlights will not turn off with ignition off? http://technoanswers.blogspot.com/2012/01/heater-fan-and-headlights-will-not-turn.html

---------
High beams stopped working but headlights still work?

http://howtobyme.blogspot.com/2011/11/highbeams-stopped-working-but.html

---------------
Only one head light works on 2001 Dodge Caravan? http://howtobyme.blogspot.com/2011/11/only-one-head-light-works-on-2001-dodge.html

----------------
Headlight Assembly Removal On Honda Accord http://technoanswers.blogspot.in/2012/06/headlight-assembly-removal-on-honda.html ------------- Honda Headlight Assembly Removal
http://schematicsdiagram.blogspot.in/2012/06/honda-headlight-assembly-removal.html-----------
All headlights not working? http://repairhelpcenter.blogspot.com/2012/01/all-headlights-not-working.html

----------
Headlight wiring diagram for 1997 Lincoln Town Car?

http://technoanswers.blogspot.in/2012/02/headlight-wiring-diagram-for-1997.html

-----------
Dash Lights And Front Marker Lights Flashing On And Off http://schematicsdiagram.blogspot.com/2012/10/dash-lights-and-front-marker-lights.html
---------- 2001 Chevrolet Tracker: Headlights and Dash lights Pulsating? http://whoisbyme.blogspot.in/2012/06/2001-chevrolet-tracker-headlights-and.html
--------- No parking lights and headlights not turning OFF? http://technoanswers.blogspot.com/2012/01/no-parking-lights-and-headlights-not.html
------------- How to replace HID headlight bulbs for lexus 400h? http://schematicsdiagram.blogspot.com/2012/01/how-to-replace-hid-headlight-bulbs-for.html
--------- Head Lights Comes ON by Itself? http://whoisbyme.blogspot.in/2012/07/head-lights-comes-on-by-itself.html
--------- Only high beams work but head lights not working on Ford F350?

http://howtobyme.blogspot.com/2011/11/only-high-beams-work-but-head-lights.html

-------------


Only high beams working on GMC Savana?---------
Working of Headlight switch?

----------
Both headlight bulbs blow together?
--------

Car headlight bulbs don't last long?


--------
How to replace Headlight Bulbs on Lincoln Town Car?

http://howtobyme.blogspot.com/2011/12/how-to-replace-headlight-bulbs-on.html


How to change headlight?

http://repairhelpcenter.blogspot.com/2011/12/how-to-change-headlight.html

-------------
Both headlights and turn signals not working? http://schematicsdiagram.blogspot.com/2011/12/both-headlights-and-turnsignals-not.html

----------
Headlights will not turn OFF on Ford expedition and car trailer?

http://technoanswers.blogspot.com/2012/01/headlights-will-not-turn-off-on-ford.html

----------
Headlight Assembly Removal on 2010 buick lacrosse? http://technoanswers.blogspot.in/2012/04/headlight-assembly-removal-on-2010.html
--------- Headlights flickering and car hesitates to start?

http://howtobyme.blogspot.in/2012/02/headlights-flickering-and-car-hesitates.html

---------
Hummers headlights flashes while start?

http://technoanswers.blogspot.in/2012/02/hummers-headlights-flashes-while-start.html

----------
Using non-AFS headlamp assembly for AFS assembly?

http://schematicsdiagram.blogspot.in/2012/02/using-non-afs-headlamp-assembly-for-afs.html

------------

How to replace Headlight Bulb on 2001 mitsubishi magna
http://www.howtorepairguide.com/2012/10/how-to-replace-headlight-bulb-on-2001.html

---------
These details will help.
Thanks.



Nov 22, 2012 | 1996 Pontiac Grand Am

1 Answer

My lights for a ford escape 2001 wont work


check under the hood for black box,lift the cover off of black box,marked" main fuse and relay boxfuse positions should be marked on underside of the lid to main fuse panel box,that you have just removed.check for a blown headlamp fuse in that box. it's either a blown fuse in that box,or if only one headlights "out" it will be a blown bulb(headlight bulb) it's very unusual for both headlight bulbs to blow at once. so in saying that,look for a blown headlight fuse. thank you for choosing fixya.com.

Apr 09, 2011 | 2001 Ford Escape

1 Answer

Changing a headlight on a ford focus 03


headlight bulb or assembly? remove the fender splash shield lower retaining screw. Push the fender splah shield to inside. Remove the headlamp assembly lower retaning bolt. Remove the grille. Remove the head lamp assembly

Jun 21, 2010 | 2001 Ford Focus

1 Answer

HOW DO YOU REMOVE THE HEADLIGHT ASSY TO REPLACE THE TURN SIGNAL BULB


SECTION 417-01: Exterior Lighting 2001 Escape Workshop Manual REMOVAL AND INSTALLATION Side Lamp/Front Turn Signal Lamp Bulb Removal and Installation
  1. Remove the wheel and tire. For additional information, refer to Section 204-04 .
  1. Position the inner fender well aside.
    1. Remove the bolts.
    1. Remove the pin-type retainers.
    1. Remove the screw.
    1. Position the inner fender well aside.
  2. Remove the lamp socket from the lamp assembly.
  3. Remove the bulb.

06a0ca1.gif

Dec 01, 2009 | 2001 Ford Escape

1 Answer

Tail light change in 2001 Ford F150 King Cab


lower tailgate.look for small 8 or 10mm bolts that hold tail light assembly in place .remove bolts,pull assembly off.there are also plastic 'pins' that align and help hold the tail light.grasp bulb socket and twist to remove.pull bulb straight out.

Sep 22, 2009 | 2001 Ford F150 Styleside SuperCrew

1 Answer

Headlight went out in 2003 ford escape i have


you have to remove the whole headlight assembly, then pop off the front cover pull the old bulb out and put the new one in. reverse the process to re-install. there is a small plastic tab on the topfront of the headlight assembly, that is what you need to release to get the clear cover off and get inside.

Sep 02, 2009 | 2003 Ford Escape

1 Answer

2005 Ford Escape Headlight Condensation


most of the time the headlight assemblys are replaced because of this at my work (toyota dealeraship ) but i would try to take apart the headlight assembly very carefully by prying up the tabs and glue that attach the front to the bach then clean out and reseal, or you could try to use a clothes hanger with a small amount of cloth or paper towel taped to the end and insert through the hole where the headlight bulb goes may take some time but could save you a considerable amount of money hope this helps

Apr 30, 2009 | 2005 Ford Escape

2 Answers

Need to replace head lamps on Ford Escape 2001,


there are 4 bolts that hold lamp in. the first 2 are obious. the others are behind the front bumper..the bumper must be removed to expose them...here is a cpoy of the manual to change..good luck

Headlamp Assembly Removal and Installation
  1. NOTE: Make sure that the headlamp switch and the ignition switch are in the OFF position.
    Remove the front bumper cover. For additional information, refer to Section 501-19.
  1. NOTE: Pull headlamp assembly forward to access electrical connectors.
    Remove the headlamp assembly.
    1. Remove the three bolts.
    1. Loosen the nut.
    • Disconnect the electrical connectors.
    a0045726.gif
  1. To install, reverse the removal procedure.
    • If necessary, adjust the headlamps. For additional information, refer to Headlamp Adjustment in this section.

Apr 22, 2009 | 2003 Ford Escape

1 Answer

Head lamp bulb change


I've done this once, so i'll do my best to help you here. You'll need some sort of light you can shine to do this. First you need to unplug the headlight plug from the assembly. Next there will be a rubbery boot you also need to take off, this just pulls right off. This next part is where it gets sticky. There is a phillips screw that holds down a flexible pin/clamp/whatever you want to call it down against the back of the bulb. Unscrew the screw enough to remove the pin, you won't need to completely remove the screw though to remove the pin. Once you have the pin removed, you can then get at the bulb. The bulb itself has 3 points, like a down-ward arrow. Line up the 2 points that are closer together with the top and just slide the bulb in WITHOUT TOUCHING THE GLASS of the bulb. If you touch the glass, say goodbye to the bulb's life. To put it back together, get the bulb in, the pin screwed down and reverse the rest of the process. Hope this helps.

Mar 13, 2009 | 2001 Ford Escape

1 Answer

Replace ford escape turn signal front 2005


you should not have t remove the headlight assembly to replace the bulb access should be under the hood. as for the moisture the bulb holder may be damaged or not fitted properly

Oct 16, 2008 | 2005 Ford Escape

Not finding what you are looking for?
2001 Ford Escape Logo

Related Topics:

383 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...