Question about 1998 Cadillac Seville

2 Answers

My breal lights dont work and i ned to know whick fuesa or sencer it is

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 192 Answers

The stop lamp fuse is in the rear junction block located under the back seat.
To remove the back seat,simply grab the front of the seat with both hands underneath and pull straight upwards, this releases the spring clips, no bolts or screws to remove.

Diagram of rear junction block:-

my breal lights dont work and i ned to know whick - 58c25e8.gif

The stop lamp fuse is numbered 19 in the diagram above.

Posted on May 02, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cadillac Master
  • 2,100 Answers

You have fuses allover the place, check under the dash on the driver's side, If none are blown, check under the hood, left side,,,,,,,then the right side, if you can't find a blown fuse, check the switch itself on the brake pedal. Could be a bad wire, bad switch, check it out. hope this helps.

Posted on Apr 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

O2 sencor


What kind of vehicle, and what is the actual code ?

Jul 01, 2013 | Cars & Trucks

1 Answer

Cam shaft position sensor 350z


The Cam Shaft Position is behind the motor on passenger side and has a green cap with 2 little wires going to it .with a 10 mm bolt to take out now what most people on here did not tell is that it was hard to take the green cap off the sencer first because the clip is on the bottom so you cant see it to take it off and if you just try to take a flat head screw driver to it you will bust your green clip.so take the sencer and cap off together and then take the green cap off after you get the sencer out .ok when you take the 10mm bolt out then you can reach down and pull the sencer out but its pretty hard just to pull out your going to want to twist it but you dont have to you are just pulling against the rubber O ring thats on the sencer just pull hard and it will come out.then pull the cap off .you acually push in on the clip towards the sencer to get it off ,not down ,but towards the bolt hole ,to take off,repalce clip put new sencer on and put sensor in motor,dont wiggle around on the wires to much because they are little and I could see braking one if not both

Mar 23, 2012 | 2004 Nissan 350Z

2 Answers

Which relay switch do i replace for powers windows on 2002 ford wind star van, drivers window and back sides work passengers doesnt work i was told to replace relay I dont know whick one to replace


Doubt it is a relay,all but one window works! Are you just going to buy a new one,without knowing if it is the problem?
Check the pass window switch.
Switch,okey,remove door panel and check out motor

May 25, 2010 | 1998 Ford Windstar

1 Answer

Vw golf 1.4 2003 driver door sencer not working


Think it will be in the door lock - therefore if it's not working then you need a new lock.

May 08, 2010 | 2003 Volkswagen Golf

1 Answer

Is there only 1 computer for the 2000 olds intrigue? if not whick one controls the ABS and TRAC controls. The ABS , TRAC control, brake ans service engine soon lights are.


dont think its computer,but you have one for engine and another for abs/trac and then body computer, scan engine codes and go from there,hope this helps.

Oct 10, 2009 | 2000 Oldsmobile Intrigue

2 Answers

I have a 1993 cutlass ciera s and it dies


my 93 olds stalls then dosent turn over but i take ecu fuse out and wait a few minutes it will start and run till next time it decides to stall

May 14, 2009 | 1993 Oldsmobile Cutlass Ciera

1 Answer

No break lights on 1993 acura vigor where are fuse boxes and or breal kight switches?


the fuse box should be under the dash on the driver side or in either end of the dash you would see a little handle. and your brake light switch is gonna be at the top of the brake pedal bar.

Dec 30, 2008 | 1993 Acura Vigor

1 Answer

Engine light on


no / what code does it say or you dont know/ there are sometimes 4 o2 sencers

Oct 22, 2008 | 2004 Ford Freestar

Not finding what you are looking for?
1998 Cadillac Seville Logo

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...