Question about 2000 Isuzu Trooper

1 Answer

When i dip the clutch it cut out - 2000 Isuzu Trooper

Posted by on

  • 8 more comments 
  • catherine437 Apr 29, 2010

    when i push my clutch in two put in gear it cut out the engine

  • catherine437 Apr 29, 2010

    when i push my clutch in it cut out the engine

  • catherine437 Apr 29, 2010

    no i was told it was a sensor samewere

  • catherine437 Apr 29, 2010

    no because i dont know how that would cause it when i push the clutch in it like its stoping the dieasel

  • catherine437 Apr 29, 2010

    i dont have a fault code

  • yadayada
    yadayada May 11, 2010

    don't make me beg for answers, what is the fualt code.

  • yadayada
    yadayada May 11, 2010

    what is the fault code?

  • yadayada
    yadayada May 11, 2010

    ok then u knbow what to do, right?

  • yadayada
    yadayada May 11, 2010

    has the electonic control system for the engine been tested for fault codes?

  • yadayada
    yadayada May 11, 2010

    what do u mean by "dip"

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I just noticed this happening to me too, where come off the highway and rolling to a stop and depress the clutch to throw the car into neutral that sometimes the engine cuts out. I just though about something and it might fix the problem I'm going to check it out tomorrow. What I did was rig up a after market cold air intake to the throttle body; believe me its in no way professional but for a while it seems to be working great, until I just started notice my engine cutting out. My solution might be to put the stock air box back in the 325i and see if this thing keeps on happening. If it doesn't than I figured it out - its a air-intake issue. But if it's not that, then my mechanic will be getting the "Please fix me Car" call from me. He is great - I break the car and he fixes it.

Posted on Dec 16, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2002 1.8 mondeo holds back on power wen driven at town speed and engine cuts of wen driving but dip the clutch and engine will run again. any ideas


Have you checked the fuel filter? It may be time for a change. In a Manual transmission when it dies any time as long as your still rolling at a decent rate of speed you should be able to push the clutch in to start the engine back on.

Sep 20, 2012 | Cars & Trucks

1 Answer

I have a 2002 chevy s-10 4 cyl. 2.2 liter its not starting it overheated while i was driving the ratiator is bad i tested the sparkplugs for commpression it was good why wont it start


when engine over heating to keep from doing engine damage determine how long you drive vechicle if you stopped in time.replace thermostat, radiator pressure cap and replace radiator if it has holes in it and leaking replace top and bottom radiator hoses.check your engine oil on oil dip stick if dip stick look like milk shake you could blowed head gasket if you did drive too long when truck over heated.check your radiator cooling clutch fan should when engine cold turn clutch fan by hand should drag when engine get hotter then clutch fan should be more harder to turn by hand.if clutch fan feel loose and spin easily free wheel clutch fan need replacing it will cause engine to overheat.

Nov 13, 2011 | Chevrolet S 10 Cars & Trucks

2 Answers

New clutch still slipping


Lets start with what was replaced : Clutch pressure plate, throwout bearing,pilot bearing,input shaft bearing, was flywheel cut or replaced,Clutch cable or slave cylinder (whatever is applicable,) Lets see what repair shop says. Depending on what they say they did or didn't do we will take it from there.
keep me posted

Apr 27, 2010 | 1992 Isuzu Rodeo

2 Answers

My 1.6 club astra cuts out occasionally cuts out on approach to a junction as i dip the clutch the revs just drop away.is this am air flow sensor problem


Try removing the throttle pot and cleaning it with carb cleaner this will sort it out as any heavy carbon deposites will cause your problem

Mar 08, 2010 | 2000 Volkswagen GTI

1 Answer

I cant get it to start right & wont tickover


if you mean the starter is cutting out when you dip the clutch, the problem should be the starter relay.....can you be more specific of the symptoms

Feb 23, 2010 | 2001 Kia Sportage

2 Answers

Vw aac engine cuts out on idle


I have a 1994 2.0l petrol with an idle problem. It will cut out when its cold and when slowing down to a stop and dipping the clutch. It will re start on the key or rolling jump start everytime no problem. Any help would be really helpful.

Feb 06, 2010 | 1993 Volkswagen Eurovan

1 Answer

Where is the clutch fluid tank on a 96 isuzu


usally on front of master cylinder if is auto u put it down dip stick

Oct 05, 2009 | 1995 Isuzu Trooper

1 Answer

Hi when i dip the clutch i get a knocking karl


pressure plate broken, new clutch kit needed.

Sep 21, 2009 | Cars & Trucks

1 Answer

Sticky clutch


mid level to higher, u have a worn out clutch, replace it before u damage the trans

Apr 14, 2009 | 2004 Ford Focus

1 Answer

BMW cutting out


I dont know if im right but i think its a problem of oil pressure.

Jun 16, 2008 | 1999 BMW 318 ti

Not finding what you are looking for?
2000 Isuzu Trooper Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14379 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...