Question about 2006 Saturn ION

1 Answer

I need to get a copy of my key. I brought a used Ion and only got one key. Where can I get a copy made.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Saturn Master
  • 1,149 Answers

If your original that you got with the car is in good enough shape, a locksmith can duplicate it for you, but if it isn't in that good of shape, often you can get a key cut from the dealership's service department, based on the Vehicle's VIN number. It is a bit more expensive, but they usually can help you out....

Posted on Apr 29, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do i remove the key switch on my 2004 satur ion without the key

You cannot its thats simple ,change the whole unit and do not damage the ring for the chipped key around the outside ,use a radial cutter to cut the clamp as their are bolts with no heads ,ok you may be luck with a centre punch but its quicker with a radial cutter and loads of wet rags to catch the sparks

Jul 19, 2014 | 2004 Saturn ION

1 Answer

Saturn ion trunk release

have you checked the fuses for these things -cheers Denny

Nov 01, 2013 | Cars & Trucks

1 Answer

2003 saturn ion sometimes the key will not come out of the ignition

Try your backup key and if it does it still you will need to replace the ignition switch.Go to your local GM dealership and buy it and have them code it for you.

Oct 25, 2012 | 2005 Saturn ION

1 Answer

2007 saturn ion passlock light off after relearn sequence failed

You are going to need the dealer unless you used the correct ignition switch, hope you have the old key,.

Oct 22, 2012 | 2007 Saturn Ion

1 Answer

How to get a Saturn Ion '03 unlocked when the keys

There is a tool they call a slim jim. It is a thin piece of metal that will slide in between the door glass and weatherstrip. It has a couple of notches on it and usually a hook. You slide it down by the key area of the door and try to move the linkage that the key usually turns. Another thing you can try is using some kink of rod or coat hanger and try to go in between the door and body weather strip and try to push or pull the lock, which ever way you need to go. If you have power locks it is sometimes easier to use the switch and move it in the right direction to get the doors unlocked. As a last resort most law enforcement agencies have this tools and will help you get into your car. Please rate my answer so I am rewarded points for it.

Jan 30, 2012 | 2003 Saturn ION

1 Answer

How do you lock a saturn 2007 ion car's door with a key?

Put the key into the keyhole and turn it counter clockwise. Now, if you want to lock all doors without using the key or the remote key fob, you can press the lock button your door. The car will chime a few times, then shut your door. About 5 seconds later, all doors will lock. Neat, huh?

Nov 01, 2009 | 2007 Saturn ION-2 Quad Coupe

2 Answers

Key stuck in ignition switch 2006 ION SATURN

either the lock cylinder came apart in the housing,which if it did you will need a new cylinder/key/housing and program the housing and build the lock cylinder(take to deal)or the ignition switch went bad (electrical part on end of lock cylinder) bith are common ion issue. i would take to the shop,they should have all those parts in stock

Oct 16, 2009 | 2006 Saturn ION

1 Answer

I have a 2005 saturn ion, the door won't open

the latch is simple first you got to get the door open though after that there are 4 to 6 screws that need to come out 4 usualy under the door pannel on the inside check the handle that you use to pull the door closed there sometimes is a screw in there afeer that there are plastic pop secrws that just pop out so after teh screws are out pull the bottom of the door pannel and it will pop out some times you will have a screw in the back of the actual inside hanle plastic or you will need to hole the door handle open to slide it off push up on the pannel so it comes free from the window lip unplug the electrial clip that is done by a push tab. take off the plastic its held on by a rubber cylacone there will be a metal rod the goes to the latch with a plastic clip that holds it in place push dow on the clip then pull the rod out un bolt the latch and take it out.

Jun 04, 2009 | 2005 Saturn ION

Not finding what you are looking for?
2006 Saturn ION Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts


Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8589 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides