Question about Ford Windstar

1 Answer

Change my water pump in a 95 ford windstar - Windstar Ford Cars & Trucks

Posted by on

  • soivic Apr 29, 2010

    yes, it reaaly is a big job !!!!



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,297 Answers

Not an easy job, here are are your service instructions....

Disconnect negative battery cable.
Drain cooling system. Loosen drive belt tensioner, and remove drive belt.
Raise and support vehicle.
Remove lower radiator hose.
Remove lower nut on both front engine mounts.
Lower vehicle.
Remove generator.
Position drain pan under power steering pump.
Using Fuel Line Separator (T90T-9550-S), disconnect power steering pressure line from power steering pump. Remove power steering pump filler cap.
Disconnect necessary coolant hoses.
Attach lifting eye to front exhaust manifold.
Attach engine lift to lifting eye and lift front of engine 2" (51 mm).
Remove water pump pulley.
Remove drive belt tensioner pulley from power steering pump bracket.
Remove power steering pump bracket with power steering pump attached, and position aside.
Remove water pump bolts and nuts.
Remove water pump and gasket

Posted on Apr 29, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I installed a new fuel pump in my 95 windstar, still not starting, checked the pressure at the rail and only have about ten pounds of pressure could the regulator be my problem,and the old pump be good?

Its possible.
Could be a dirty fuel filter too.
If you did not change the filter do that next. If you still have low pressure try to clamp off the return line to the tank to check the regulator.
You could have a leaking injector too.

Dec 18, 2012 | 1995 Ford Windstar

1 Answer

95 ford windstar fuelmpump not pumping replaced it and still no start

Was the fuel pump new? When this much work is involved never use salvage parts. The fuel pump run function is interlocked with engine oil pressure sensor to indicate engine is running. On initial startup the fuel pump run is momentary to prime the injectors. Your problem is probably the oil pressure sensor or sending unit

Jun 15, 2017 | 1995 Ford Windstar

1 Answer

95 ford windstar fuelmpump not pumping replaced it and still no start

Guessing an just replacing parts isn't the way to a proper fix ! Testing the electrical circuits is . You best bet , take it to a qualified repair shop .

Jun 15, 2017 | 1995 Ford Windstar

1 Answer

I'm working on a friends 95 ford windstar lx check

Could be a head gasket issue, did all of the old plugs look similar in color?
I would try a leak down , or compression test, along with a coolant pressure test.

Dec 01, 2011 | 1995 Ford Windstar

2 Answers

Trouble shooting and over heating for ford 95 windstar 3.8liter

Change your thermostat. The thermostat is in the housing on top of the motor with a big hose going to radiator. Good Luck, JERROD

Oct 24, 2010 | 1995 Ford Windstar

1 Answer

2000 Ford windstar engine is making a rattling sound after replacing a serpentine belt which may have been damaged by water pump freezing overnight although water pump is fine

Check all the pulleys for play in the bearings of the pulleys,and check the water pump play,pin the water pump by hand to see if it is it.The frozen water pump,will leak,most likely,hope the engine is o k.

Jan 29, 2010 | 2000 Ford Windstar

2 Answers

Where is transmission vacaum modulator on 95 ford windstar

the 95 models did not have a vaccum modulator on them they were and electrronic transmission it is probably in the tranny itself.

Aug 30, 2009 | 1995 Ford Windstar

1 Answer

Belt diagram

q2392d.gif q4705a.gif

Item Part Number Description 1 8620 Drive Belt 2 10300 Generator 3 6B217 Drive Belt Tensioner Pulley 4 6B209 Drive Belt Tensioner 5 3A733 Power Steering Pump Pulley 6 19703 A/C Compressor 7 6312 Crankshaft Pulley 8 8509 Water Pump Pulley

here is the routing diagram of the 3.8 L on the 95 windstar

Jul 30, 2008 | 1999 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers


Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides