Question about Pontiac Sunfire

1 Answer

I Have a 2002 sunfire with echotech 2.2 engine, yesterday the car was running fine, this morning i try and start it and took 3 attempts, its turning over just sounds like not getting gas or spark, did get it started and its running rough and lacks power and the engine light is blinking any ideas???

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Pontiac Master
  • 1,146 Answers

Hi:
Usually the only thing that causes a blinking check engine light is a cylinder misfire. Usually this is caused by a failed ignition module, but to find out specifically,might take some guessing, or a computer download. You can scan the car's computer system, anf find out what codes are tripped. Most auto parts stores, like autozone,will do this for free. If you detect a cylinder misfire code, or similar, that is what you need to get fixed..

Posted on Apr 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to rekey a pontiac sunfire 2004


Im assuming you are refering to the anti theft security key relearn process.

1. Perform a security system relearn.
2. Let the vehicle sit for more than 10 minutes with the key off.
3. Attempt to start the engine, leave the key in the run position monitoring the security system indicator.
4. After 10 minutes, the security indicator will change state.
5. Turn the key off and wait 10 seconds.
6. Attempt to start the engine. If the engine stalls, wait another 10 minutes with the key on.
7. After the second 10 minute timer has expired, turn the key off for 10 seconds.
8. Attempt to start the engine. If the engine stalls, wait another 10 minutes with the key on.
9. After the 3rd 10 minute timer has expired, shut the key off for 10 seconds.
10. The security system will relearn on the 4th starting attempt and the engine should start and run.

If that doesnt work, look into this link http://vatspasslockpasskeysecurityhelp.yolasite.com/

Aug 07, 2011 | 2004 Pontiac Sunfire

1 Answer

Pontiac Sunfire 1997. Won't start.


When jumped off ,if it drags to start,have the starter checked,and if when jumping the car off,the starter turns the engine over real good,then the cables are most likely the problem,replace them.

Jun 07, 2010 | 1997 Pontiac Sunfire

1 Answer

02 pontiac sunfire, wont stay running!


have you checked your timing?sometimes it jumps.

May 29, 2010 | 2002 Pontiac Sunfire

1 Answer

I started my x type jag yesterday and only run the engine for about 20 seconds. now it will not start but the battery is fine.have i got to reset the e.m.s


try locking and unlocking the door with the key 2 times slowly then on third attempt jump in quick and try to start ,if it still will not or wont start then its a dealer only job

Nov 15, 2009 | 2002 Jaguar X-Type

1 Answer

Wife started car up yesterday morn and trac off light came on and car running rough like on 3 cylinders


if trac off light came on then check engine must also be on, when ever a engine light lites it automaticly shut off traction controll because it know car is not running good, when car is repaired and computer reset light will go off, scan computer for codes and see what codes are stored .

Nov 06, 2009 | 2002 Pontiac Sunfire

1 Answer

2002 grand am echotech 2.2 wont start replaced crank sensor and ignition module and still wont start has no codes in computer and turns over fine has both spark and plenty fuel pressure i pulled breather...


sounds like you dont have enough fuel preasure. if you say you do then check injectors listen to see if you can here them clicking or use an injector test light to make sure they are pulsing. go with and see . good luck.

Oct 17, 2009 | 2002 Pontiac Grand Am

1 Answer

2002 Saturn SL1 - won't start, turn over, starts fine with jump


Have the alternator and battery checked. The battery may not be holding a charge. The alternator may not be charging the battery,it should put out between 14 and 15 volts,any less the alternator is bad.

Jun 15, 2009 | 2002 Saturn Sl

1 Answer

96 pontiac sunfire wont start.....


Starter solenoid , or wire that leads to it.

Also , if standard transmission , may be the switch on clutch pedal is intermitant.

Engine won't turn over unless it thinks you have your foot on the clutch.

May 05, 2009 | 1996 Pontiac Sunfire

1 Answer

Clicking starter=car not starting


the battery is located under the rear seat, check battery connections. if connections are tight replace starter.

Mar 29, 2009 | 2002 Cadillac Deville

1 Answer

Won't start


try jump starting. the battery may not have enough power to start the engine

Sep 26, 2008 | 1996 Pontiac Sunfire

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

314 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...