Question about Oldsmobile 98

1 Answer

What is that tighting sequence for the intake plenum on a 1996 olds 98

Posted by on

  • olawsjr Apr 29, 2010

    no its 6 3800 series two

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 332 Answers

Is it 4 cyl ?

Posted on Apr 29, 2010

  • omaromid
    omaromid Apr 29, 2010

    I'm waiting for your comment.

  • omaromid
    omaromid Apr 29, 2010

    This is a typical tightening order for intake manifold.
    (next to middle top left) 4, (middle top)1, (next to middle top right) 5,
    (next to middle bottom left) 3, (middle bottom) 2, (next to middle bottom right) 6,
    I don't know how it'll appear in text but let me know if you need clarification.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Upper Intake Plenum Gasket R+R Torque Sequence


I cannot post a picture here because that is copyrighted material. However, the torque sequence is always "start in the center and work your way out to both ends...pretty simple.

The torque specifications are different depending on which engine your Escape is equipped with.

Apr 23, 2012 | 2004 Ford Escape

1 Answer

Torque specs on intake plenum and fuel rail on a 98 ford Ranger with a 4.0l




Hi the torque spec for this fuel rail/manifold is 9-11lb/ft. Here is pic of the sequence.

2011-03-28_205720_fuel.jpg



Jan 10, 2012 | 1998 Ford Ranger SuperCab

1 Answer

What is the torque specifications and sequencing for the intake manifold on a 1998 Chevy blazer?


zjlimited_198.jpg

Fig. 1: Intake manifold installation-4.3L engines (click over image for zoom)


zjlimited_200.jpg

Fig. 2: Intake manifold bolt tightening sequence-1996-98 4.3L engines

Install the bolts and tighten in sequence and in 3 steps as follows:

  1. First step to 26 inch lbs. (3 Nm).
  2. Second step to 106 inch lbs. (12 Nm).
  3. Final step to 11 ft. lbs. (15 Nm).

Hope this helps (remember to rate this answer). Good luck.

Dec 08, 2010 | 1998 Chevrolet Blazer

2 Answers

Car smokes in front when started then goes away


Blown head gaskets cause this symptom.
Also, oil leakage on to the hot parts of your engine can cause this problem.

The smoke can be either antifreeze or oil that accumulated in a plenum or low spot that gets hot when you start your engine.


Jul 08, 2010 | 2000 Buick Park Avenue

1 Answer

Remove the upper intake plenum 96 Pathfinder


there are three hoses on the back side that need to be pulled two coolant one vacume. five or six 6mm allen head boltsdown the middle of the intake egr equipped? try to break the large nut loose rather than pull all the egr and dpse sensor apart from the intake.

Mar 21, 2010 | 1996 Nissan Pathfinder

1 Answer

Looking for torque specs and sequence of both intake manifold and plastic plenum on 98 pontiac bonneville 3.8 non turbo


Lower intake bolts 11 ft. lbs start in the center of the intake and work your way out cross from side to side.Tighten the upper intake bolts with the same procedure with 89 inch pds.Be sure to apply threadlocker to the lower intake bolt threads.

Feb 07, 2010 | 1998 Pontiac Bonneville

1 Answer

Need torque sequence and torque specs for intake plenum on 3.5L 02 Olds Intrigue.


bottom intake bolts torque 15-18 ft lbs from center and in criss cross pattern top plenum bolts 12-14 ft lbs

Jan 22, 2010 | Oldsmobile Intrigue Cars & Trucks

2 Answers

I need to remove the upper intake manifold plenum. All of the obvious bolts are out however the plenum still wont come off. Are there any hiden fasteners inside the plenum?


There are no fasteners inside the plenum, The electrical connection for the injectors is very tight due to a rubber ring gasket the seals the injector assembly to the plenum. Carefully push down on the electrical assmbly while prying up the plenum. You also may have to remove the thermostat and hose. I've done this 3 times on my ladies 96 Yukon.

Jul 11, 2009 | 1996 Chevrolet K1500

1 Answer

Need to the torque specs for a 1999 Dodge Durango


Head Torque sequence Step 1: torque to 50 Ft/Lbs Step 2: torque to 105 Ft/Lbs recheck final torque in sequence.

Torque intake manifold: Step 1: 12 inch/Lbs, (hand tight) Step 2: 72 inch/Lbs, (6) Ft/Lbs Step 3: 12 Ft/Lbs
torque intake plenum: Step 1: 24 inch/lb (hand tight) Step 2: 48 inch/lb (4) Ft/Lbs Step 3: 84 inch/lb (7) Ft/Lbs (To torque bolts, start in center using crisscross pattern)

Apr 07, 2009 | 1999 Dodge Durango

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...