Question about 1997 Honda Civic

2 Answers

Car got power but it wont start batt good and turns over?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 76 Answers

Your coil pack has gone bad. It is the little black box that is screwed to the distributor that has malfunctioned. Take the distributor cap off and you will see it. It has 2 or 3 wires coming off it. and is held by 2 screws. That is what it should be and alot cheaper and more common of a problem than ecm.

Posted on May 02, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 189 Answers

The engine control module(ECM) is bad.

Posted on Apr 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No power and batt is good


My first guess would be a dead cell inside the battery, or a blown fuseable link between the battery and the fuse box.
Someone would need to check the battery connections and fuse box with a meter.

Jun 01, 2013 | 1996 Ford Taurus

2 Answers

97 checvy astro 4.3 6cyl. I replaced battery, Starter and the batt wont hold a charge. Is it possible to check the wiring from the alt to the starter without having to remove the alternator?


Yes, If you have a volt meter, jump and start engine, with engine running you should have approx 13.5 to 14.2volts that would tell me that batt is getting charged when engine is running. you said new batt would not hold a charge, I would be thinking about a parasitic draw(small amount of power) that in time will drain batt. things to look for are glove box lights, under hood lights that dont turn off. one easy way too see if you have a draw is to disconnect one batt cable, now use a regular (12volt non-self powered) test light and touch one end to batt cable and the other to empty batt terminal, with no light switches on and doors closed, this test light should not light and if it does then you have a drain on batt that will kill it say overnight.

Feb 12, 2011 | Chevrolet Astro Cars & Trucks

1 Answer

Car wont even turn over batt is good 12.45v


The Water light? you may have over heated the car, also you may have caused a crack in the engine block by driving the car after the Temp light came on, Check the Thermostat, This may have caused the Light to come on and can cause some major problems if not replaced. Good luck!

Mar 19, 2010 | 1997 Volkswagen Jetta

2 Answers

96 passport batt good starter getting power just


Have you tried bypassing the ignition? Turn the key to the on position and cross the starter terminals with a screwdriver. If it starts then you will need a new ignition or possibly a new ignition module.

Jun 28, 2009 | 1996 Honda Passport

1 Answer

New starter good batt. only clicks wont turn over 1995 montero


The Batt does not have a full charge or it is the wrong cranking AMP's for the car... find out if it is the right Batt and also that it is put on a "slow charge" over night or at least 6 hr's

Jan 20, 2009 | 1995 Mitsubishi Montero

1 Answer

Lincoln Mark VIII wont start


if you tried to jump the veh. when the batt. died, then you may have fried a fusable link in the harness. use a test lite to (CAREFULLY) look for voltage leading away from the batt. also you may want to check and see if someone can hear the relay click on as you try to start. (it is sometimes hard to hear it, so you want minimum back ground noise). good luck!

Jan 09, 2009 | 1994 Lincoln Mark VIII

1 Answer

97 frord expedition wont start


make sure battery is charged. Check batt. terminals for corrosion. Check ground wires from batt. to the point where they are grounded to ( engine and body ) for loose connections.

Jan 04, 2009 | 1997 Ford Expedition

4 Answers

Car shakes when trying to start and doesn't turn over


  1. hold gas pedal to floor while trying to start. do not pump pedal.
  2. holding pedal to floor is how you start a flooded f.i. engine

Nov 12, 2008 | 2000 Lincoln LS

1 Answer

Lincon town car 2001,wont start


Check the the park/nuetral switch. Check power at starter relay.

Oct 22, 2008 | 2001 Lincoln Town Car

Not finding what you are looking for?
1997 Honda Civic Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...