Question about 1997 Jeep Grand Cherokee

1 Answer

Immobiliser has locked me out of my jeep grand cherokee, can it be overridden?

Posted by on

  • uno_1 May 11, 2010

    is it an aftermarket system? and what do you mean by "locked" you out, i.e. the key wont open the door or the car just wont start...?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

If you have a programmable pas key (grey) you can't override. If you have a black key, try locking and unlocking the drivers door with the key...try the rear hatch if that one does not work. There is also a purple or lavender wire that comes out of the drivers door through the rubber boot. if grounded it should let you start it (black key only)
Ifg you can't get into the vehicle at all, then you may need dealer assistance.

Posted on Apr 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix locked liftgate on 2008 jeep grand cherokee ?


first is diagnosis.
you examine and test it. to see if its electrical or mech. failure.
and once discovered that follow that to logical conclusions.

Jul 08, 2014 | Jeep Grand Cars & Trucks

1 Answer

1994 Grand Cherokee: engine will not run. starts up then cuts off-solve...


try using your spare key,or replacing batteries in remotes and reseting alarm system.....(this is a symptom of the immobiliser working as it should)

May 17, 2010 | 1994 Jeep Grand Cherokee

1 Answer

Cherrokee jeep immobilised, after battery went flat. jumped battery, disconnected battery and reconnected to try to re set alarm, phobb works,on alarm but when key turns no turn over,?


If by turning over you mean that the engine isn't turning when you turn the key, then you have a failure in the starting system. (check battery, connections, relay and starter) If the engine turns but dosen't start, try locking and unlocking the drivers door to re-set the security system.

Feb 23, 2010 | 1997 Jeep Grand Cherokee

1 Answer

98 Jeep Grand Cherokee Power Door Lock Problem


I have a 1996 Grand Cherokee - the same problem, except my interior lights flash on and off at the same time. Did you get your problem solved?

Dec 21, 2009 | 1998 Jeep Grand Cherokee

1 Answer

I changed battery i have key lock signal on dashbord the car not worked what can i do its look like there is no ignitions


you my friend have set off the immobiliser and will have to have it reset, im not entirely sure wether you will have to have jeep themselves do it or wether there is an easier way to do it?

Feb 24, 2009 | 2000 Jeep Grand Cherokee

1 Answer

Engine Immobilser


I have a 1996 Jeep Grand Cherokee 6 cylinder. You might want to check the Ignition Off Draw (IOD) fuse in the Electrical Power Distribution center located in the black box located just in front of the coolant fill container on the left side under the hood. This is a 40 amp fuse, orange in color and is the orange fuse closest to the firewall. This fuse is used to put the jeep in storage if you don't plan to drive it for a while. Which would stop the current flow and not allow your battery to die. GOOD LUCK!

Dec 27, 2008 | 1996 Jeep Grand Cherokee

3 Answers

1996 Jeep Grand Cherokee - Will Not Start or Run


they have crankshaft sencers on the transmission on jeeps. it would be up high on the drivers side on front of transmission. they will cause it to not get fuel or fire and can run then quit.

Jul 19, 2008 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
1997 Jeep Grand Cherokee Logo

281 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...