Question about 2002 Mazda Protege

2 Answers

Car won't let me in.

My car wont let me in with any of my keys and the red security light is blinking. How do i get in?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Try putting the key in and turning it and pulling the door handle to open while keeping the key turned.

Posted on Apr 29, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 189 Answers

If you have a key fob,try it. if not,then get under vehicle and follow battery cable from the starter toward the battery. you will run into a few wires in a bundle coming off that battery wire. this is where the security system is tapped to get power. cut those wires and then your key will work. its a temp fix,so get your security system looked at asap after doing this if you want the security.

Posted on Apr 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The security light on the dash is on and blinking and isn't starting


Somebody tried to break into your car, and you wont be able to get it to turn over without reprogramming your car key, or simply be persistent,and continue trying to crank it. but for sure you will need it re programmed, beware because it is expensive.

hope this helps. by the way that system is the "Anti-Theft"

Aug 18, 2017 | Cars & Trucks

1 Answer

Car wont start light blinking


The red light flashing is telling you that the security circuit has not recognised your key chip so it will not start. Either there is a fault on the reader or you have dropped your key and damaged/lost te chip.
Ring an auto locksmith. They will quickly cut you a set of keys and code them to your car.
Always keep a spare key handy.
Roger

Apr 07, 2014 | 2003 Ford Focus

1 Answer

Security light was on then drove next time off. now car wont turn over to start


If your security light is blinking.Turn key to on position(2 clicks) wait for 10 minutes security light should stop blinking.Turn key to off position. Turn key forward 2 clicks wait for 5 seconds and try to restart the car.

Aug 29, 2013 | 2001 Pontiac Grand Am SE

1 Answer

2001 jag won't start. Security light is blinking


the problem you have is caused by the pats anti theft system is not recognising your key it may be the transponder or you may need a new key and get it programmed by a jag dealer or someone with the needed gear to do it with best advise take it to a jag dealer

Aug 13, 2017 | 2001 Jaguar S-Type

1 Answer

When I try to start car, it won't start and security light blinks. I'v e had to ignition switches put on before and I had a new key made. Car still won,t start.


If any of the gauges are blinking and going haywire and the security light flashing then the instument cluster is faulty.But if it is just the security light flashing then its in the switch.If you only had the switch replaced then you need a new ignition lock cylinder because its worn out.

May 11, 2011 | 1995 Oldsmobile Cutlass Supreme

2 Answers

1994 camaro wont start security light blinking


try locking and unlocking the drivers door with the key. hope this helps. mike

May 29, 2009 | 1994 Chevrolet Camaro

2 Answers

2000 Alero Security light flashing and wont start


With the new lock cylinder in it, turn the key on. The security light should blink. Leave the key on for 10 minutes, the security light will quit blinking and go out after 10 min. This will reprogram your security system and the car should start. Also leave a battery charger on it while the key is on, If the battery goes dead during the 10 minute reprogram sequence, you will have to start over again.

Mar 08, 2009 | 2000 Oldsmobile Alero

Not finding what you are looking for?
2002 Mazda Protege Logo

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...