Question about 2001 Chevrolet Silverado 1500

1 Answer

2004 chevy silverado. Truck tries to start but wont. Everything is fine? Had it checked nothing wrong. Alternator, Starter Ignition Switch everything checks out!

Posted by on

  • Anonymous May 11, 2010

    Everything is fine? So what is the problem?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 921 Answers

Could be a bad fuel pump...when you first turn on the key in the mornings in a quiet setting you should be able to hear a humming noise coming from your fuel tank it might only last 4 to 5 seconds this is the prime for the fuel rail going to injectors..if you dont hear this, i would take it to a shop to confirm. usually on most cars there is a dedicated fuel prime wire that you can hook up twelve volts to confirm that the pump is working, if the pump is working then it will be a lot easier fix.. because it might only be a fuse or relay that is causing the problem.

Posted on Apr 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2004 Chevy Silverado. Occasionally when I turn the key to start it nothing happens. I have power, all lights come on. There are no noises or anything. If I use the remote starter, it works.


sounds like the ignition control switch has gone bad. all light will come one but if you turn to start and nothing happen but works with remote starter then the first thing to get checked is the ignition control switch.

Nov 11, 2013 | 2004 Chevrolet Silverado 2500HD

2 Answers

Replaced starter and ignition relays under hood on my 99 chevy silverado and to wont do anything no security light no nothing is on everything good on all connections replaced wiring harness...


Is power getting to the ignition switch? Do the warning lights and gauges come on when key is turned to on? That would verify power in and power out at the switch. Then you would need to check the start circuit. A single start wire comes out of the switch, the signal travels through the neutral safety switch and a starter relay and then to the starter solenoid mounted on the starter. Solenoid closes contacts so battery power can operate the starter. If new starter doesn't work, power has been lost between the ignition switch and the starter.
If no power to the ignition switch check maxi fuses, all fuses in fact, and possibly a fusible link from the battery that may be the feed for the switch.

Sep 22, 2013 | 1999 Chevrolet Silverado 1500

2 Answers

Tried to start the truck---nothing happened....the ignition key was turned on but nothing. 3 days ago, same thing happened I turned key and nothing. So what I did---turned key on till red light came...


sounds like a bad connection,it wont heat up the solenoid or the starter,check your hot and negative cables from battery to starter first could be the starter itself, ggod luck

Dec 20, 2010 | 1997 Chevrolet C/K 3500

2 Answers

F150 ford truck 1990 key wont turn over engine new ign. switch


we have 1998 ford f15 we replaced the ignition and it still wont start the truck,, the key turns over now and the radio and everything comes on but it wont start, what is wrong???

Mar 18, 2010 | 1990 Ford F150

1 Answer

1995 nissan pu wont start... everything turns on


check for power to the starter at the starter's connectors while you have someone turn the key. If there is power, change the starter. If not check your ignition switch, (manual trans)clutch pedal switch, and starter fuses/relays. Hopefully this helps

Jul 19, 2009 | 1995 Nissan Pickup

1 Answer

Starter problem


hi..check out the relay switch which could
be one of the reason for the failure.If there is
a problem with the relay replace it.
try it out..
thank u..
rate me..

Feb 05, 2009 | 1990 Chevrolet C1500

1 Answer

My 01 chevy silverado 1500 won't start MOST of the time.


There is a clutch safety switch under the dash. When you press the clutch it presses the switch. You might try replacing that and see if that fixes your problem. This would cause it not to start and everything would still come on.

Jan 26, 2009 | 2001 Chevrolet Silverado 1500

4 Answers

2003 Trailblazer wont start


when you go to start it does it still say driver 1 on the dispaly... or unknown driver.. if it says unknown driver it wont do anything

Oct 28, 2008 | 2002 Chevrolet TrailBlazer

Not finding what you are looking for?
Cars & Trucks Logo

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...