Question about 2007 Hyundai Tiburon

2 Answers

I want to replace the cabin air filter on my 2008 Tiburon

I want to replace the cabin air filter on my 2008 Hyundai Tiburon. I have removed the 6 glove box screws but it does not want to budge, I am afraid to break something. Is there a trick to getting the box out?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The 2008 Tiburon has two clips holding the glovebox in place, They are located near the midpoint of each side.

Work your fingers behind the top lip of the glovebox, starting in the middle and slide toward the left corner. This lets you get a grip at the top an bottom. Pop the left clip out straight toward the passenger seat. Repeat on the right side.

There is also a wiring harness tie wrapped to the back of the glovebox. You'll probably need a pair of dikes to clip this tie wrap. Otherwise the back of the glovebox won't drop low enough to clear the air filter. Pretty bad design if you ask me.

Posted on Oct 24, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Yeah i'm having the same problem

Posted on May 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace ignition switch on a hyundai tiburon


Removal & Installation

Specific to:
Hyundai Entourage 2007-2008
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Disconnect the negative (-) battery terminal.
  3. Remove the crash pad lower panel (A).

    0996b43f80e41e86.jpg
    enlarge_icon.gifenlarge_tooltip.gif
    Fig. Remove the crash pad lower panel (A)
  4. Remove the 2 screws (A) and the trip switch connector.
  5. Remove the crash fascia panel (B).

    0996b43f80e41e87.jpg
    enlarge_icon.gifenlarge_tooltip.gif
    Fig. Remove the crash fascia panel (B)
  6. Remove the screw with the ignition in the ON position (IG ON) and disconnect the 6P connector.
  7. Remove the ignition switch (A).
  8. Installation is the reverse of removal procedure.

    0996b43f80e41e88.jpg
    enlarge_icon.gifenlarge_tooltip.gif
    Fig. Remove the ignition switch (A)
Specific to:
Hyundai Accent 2006-2008
Hyundai Azera 2006-2008
Hyundai Elantra 2006-2008
Hyundai Sonata 2006-2008
Hyundai Tiburon 2006-2008
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Remove or disconnect the following:

    The negative battery terminalThe crash pad lower panelThe ignition switch after loosening the screw with IG ON and disconnecting the 6P connector
  3. Installation is the reverse of the removal procedure.hope this helps it is off autozone website

Aug 02, 2014 | 2006 Hyundai Tiburon

1 Answer

WHERE IS THE INSIDE CABIN AIR FILTER ON 2008 FORD EDGE LIMITED


The cabin air filter is located behind the glove box. Open it then empty all contents. Grab both sides inside the box and push them inward. The glove box will then drop out further. On the left side is a catch cable. Slide that down and pull it out. The box should then just pull out. The cover for the filter is rectangular and gray or black color. On the left side push the tab toward the passenger door and pull toward you. You will either find nothing or a screen. Discard the screen and insert the new filter.
2011 Ford Edge cabin air filter removal and replacement

Feb 02, 2013 | 2008 Ford Edge SEL

1 Answer

How to replace the cabin filter? 2003 tiburon gt


The air filter is located in front of the blower uniit
behind the glove box.
It operates to decrease pollutants from entering
the car and to filter the air.
Replacement instructions:
1. Open the glove box and remove the taping
screws on the upper side of the glove box.
2. Remove the taping screws on the lower
position of the glove box.
3. Remove the filter cover and replace the
filter.
4. Installation is the reverse order of disassembly.
Here is a link to your manual. I found this on page 66 or 6-8 in the manual.
2003 Tiburon Manual

Apr 22, 2011 | 2003 Hyundai Tiburon

2 Answers

Changing cabin filter


remove the glove box door and glove box to access this. its behind the right side of dash. remove the end cover and slide out the air filter and reinstall. hope this helpsonetufshoppe_110.gif

Feb 03, 2011 | 2000 Hyundai Accent

2 Answers

I am looking for info on how to replace the cabin air filter in a 2008 Scion XD, a how to guide or instructions. I replaced the cabin filter in a Subaru and Mazda.


instructions should be in your owners manual. generally you remove the glove box and remove a plastic cover for air filter. Pull out filter, noting the direction of flow on the filter, push in the new filter and button everything up.

Oct 28, 2010 | 2008 Scion Xd

2 Answers

I have a 2008 impala and need to change the cabin air filter. However, I don't know how to remove the clips to remove the plastic under the wipers.


1. Put windsheild wipers in up position.
2. Remove the weather stripping from the passenger side cowl.
3.Unclip the wiper fliud hose.
4.Unscrew and remove fitting on sides of cowl.
5.Remove center screw cap
6.Take out the cowl cover. You may need to use a flat head screw driver to help it along.

Mar 13, 2010 | 2008 Chevrolet Impala

1 Answer

Where is the cabin air filter located on an 07 Hyundai Tiburon?


The cabin filter is located behind the glove box.

Remove the three screws along the bottom edge of the glove box door.

Open the glove box door and remove the three screws along the top edge just inside where the door closes.

Pull the glove box assembly out and you will see the cabin filter cover behind it. It is a (approx.) 1.5"x10" plastic plate that snaps out.

Remove the cabin filter cover and slide the old filter out, noting the orientation. Install the new filter in the same orientation then reassemble the vehicle.

Sep 20, 2009 | 2007 Hyundai Tiburon

1 Answer

Hyundai Veracruz cabin air filter


the filter is behind the glove box. pull the 2 clips on both sides of glove box. then remove glove box. the filter cover should be right there and just unclip the cover and replace filter.

Jan 19, 2009 | 2008 Hyundai Veracruz

Not finding what you are looking for?
2007 Hyundai Tiburon Logo

363 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...