Question about 2004 Buick Rendezvous
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Fuse #14 is for REAR auxillary power outlet (in cargo area). This is located in the INSIDE fuse box to the left of and under the glovebox (to the left of the front passenger's feet).
Fuse #32 is for FRONT Power Outlets/cigarette lighter//Lights, OnStar® Fuse 32 is under the hood in the ENGINE AREA fuse box located in the compartment just above the battery.DOUBLE CHECK YOUR MANUAL to make sure that your fuses are the same. I have a 2003 Rendezvous. Your newer model may be different. The diagrams for each fuse box can be found inside the lids of the compartments.
Posted on Dec 03, 2008
You will need to take the car to a dealership to have the service department unlock the radio for you. They have a special code to unlock the radio and then you are required to change the code to one that you will remember. An appointment should not be needed because this takes about 5 minutes. I do not remember the code, sorry.
Posted on May 18, 2009
The firing order is 1-6-5-4-3-2 the engine from the passenger side to the drivers side, radiator side 1-3-5 and on the fire wall side 2-4-6
The 3 coil from the radiator to the fire wall. #1 coil 1-4 #2 coil 5-2 and coil #3 3-6 Good luck and keep me posted, be glad to help. Its harder to explain then show, hope i made sense.
Posted on Jul 01, 2009
the BCM needs to be programmed to operate the computer. a GM techII is now required to calibrate BCM to airbag, stereo, keyless entry, and control pcm data. This is required to make it all work. a gm service should have it done within an hour or less just call and ask them how much it would be to program new BCM. it might cost @$75 to $125 but it is needed, to allow the BCM to work properly.
Posted on Sep 11, 2009
Testimonial: "ok...i bought the bcm on line (used)...but the gays in the dealer says i have to buy a new one..because the used cannot be to reflashed...or recoded."
Tips for a great answer:
Jun 26, 2014 | 2003 Buick Rendezvous
Mar 22, 2013 | 2003 Buick Rendezvous
Mar 22, 2012 | 2003 Buick Rendezvous
Dec 03, 2011 | 2003 Buick Rendezvous
Aug 22, 2011 | 2003 Buick Rendezvous
Mar 07, 2011 | 2003 Buick Rendezvous
Oct 28, 2009 | 2003 Buick Rendezvous
Oct 16, 2009 | 2003 Buick Rendezvous
Mar 22, 2017 | 2004 Buick Rendezvous
50 people viewed this question
Usually answered in minutes!