Question about 1992 GMC Safari

Open Question

I need the wireing for the stock plug on a 92 gmc sarfi

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1992 GMC C1500. Drivers side blinker/brake/hazard light don't work.replaced bulbs. plugged taillight assembly into opposite side and it works so it isn't anything in the taillight assembly. ???????


First check all your fuses.
https://www.google.com/search?q=cig+lighter+fuse+panel+on+92+gmc+half+ton&biw=1361&bih=650&tbm=isch&tbo=u&source=univ&sa=X&ved=0ahUKEwj_--aUpbvQAhUE4yYKHTvTBg4QsAQIKw#tbm=isch&q=1992+GMC+C1500+fuse+panel+location

If all fuses are good, you may have a wiring problem. If you are mechanically inclined, will need to remove the required components to expose wiring and see if you have a break somewhere. Most wiring harnesses run along inside of vehicle trunk. Then, they continue under rear seats and possibly under carpeting.

Nov 22, 2016 | GMC Cars & Trucks

1 Answer

I have a 95 gmc sierra 2500 and im trying to put in my aftermarket rafio so i cut the stock harness out the square puece that goes in back of stock radio and now i cant figure out what wire is what i got...


I would suggest you spice the wires back to stock harness by male and female connections and tape over them with black tape then get a stereo install kit that includes a wiring harness ( cost about $20 maybe or less) for the year of truck you have... it will plug right to your stock harness ...never just cut stock stereo wires from stock plug it will be more of a headache than you think trust me I've installed all my own stereo system been there done that... good luck

Mar 31, 2015 | 1995 GMC Sierra

1 Answer

Where is number one spark plug wire on dist for 1950 gmc 216 ci


Since distributor may have been moved, best is to turn engine with #1 plug out until you get to TDC compression stroke on #1, then remove dist cap to see where rotor is pointing.

Feb 13, 2015 | GMC Cars & Trucks

1 Answer

My pcm came unplugged without the battery unhooked on a 96 gmc jimmy now wont start


I don't know what you mean by, "I plugged it back up". Did you mean that the harness unplugged or that a wire came out of the plug? Inspect the fuse-box. Look for a blown fuse. You can try disconnecting the battery for 30 seconds. If the stock stereo has the anti-theft feature, remember to disable it first. If a wire did in fact break away then you will need to do more than just push the wire back into place. Please write back with any questions or status, good luck.

Mar 27, 2014 | GMC Jimmy Cars & Trucks

1 Answer

The 4x4 on my 92 sierra wont engage. what could the problem be?


sounds like you need a new actuator. the make way better ones now than came stock very common problem. it could also be in the linkage

Feb 09, 2011 | 1992 GMC Sierra K1500

1 Answer

My 92 isuzu pickup engine misses


Hello, You may need to replace your spark plugs, plug wires, and if you have a v6 engine with a distributor you will need a distributor cap and a rotor button.Please rate this answer thank you.

Mar 09, 2009 | 1999 GMC Suburban

Not finding what you are looking for?
1992 GMC Safari Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...