Question about 1992 Cadillac Seville

1 Answer

Brake light, fuel guage, and turning signal

All of these all malfuctionig. the fuel guage remain on zero, the brake light will not work at night also my passenger side turning signal does not work.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,319 Answers

The passwenger side turn signal would probably have a burned out bulb. They turn a grayish cloudy color when blown. The 3rd brake light problems relate to the Body Control Module if not operating at night only. The fuel gauge would have to be tested to see if the dash gauge or tank sending unit is bad. The tank sending unit must have 8 ohms to be functional If not replace it.

Posted on Apr 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How do I disengage the daytime running lights and still have the ability to have the headlights on at night.


The light switch can over ride the DRL. If it doesn't. You have 3 possibilities. The switch s bad, the light sensor is bad, or the BCM is bad or not receiving signals. Have the codes read for the BCM.. Takes a scanner. Not a code reader.

May 01, 2016 | 2002 Chevrolet Tracker

1 Answer

Passat back light


The light bulbs are probably dual element bulbs which would mean your night lights are separate from your brake and signal lights, even if they are in the same bulb. Replace the bulbs with new ones of the exact same type.

Oct 20, 2013 | 1999 Volkswagen Passat

1 Answer

I have a 2004 Chevy Trailblazer with a left rear brake light problem. Both the left turn signal and left night light work, as does everything on the right side. I changed the left brake bulb and the...


There were problems with the circuit board assemblies on the earlier years of the Envoy. Also check the socket for the brake light, make sure the contacts are OK.

Jul 18, 2011 | 2004 Chevrolet TrailBlazer

1 Answer

2000 mpv . my dash and turn signals stopped working. i have no fuel guage, odometer, rpm, temp guage or turn signal. the turn signals do work if the hazard lights are turned on. the battery also goes dead...


drivers side kick pannel remove it and you will see lots of conectors make sure that they are pluged in i have see this problem befor. or boky controll mod is shot

Nov 28, 2010 | 2000 Mazda MPV

1 Answer

My brother has leant me his 1993 Ford fairmont EB11. A red light is flashing intermiitanly it looks like a fan in some kind of cylinder. Could someone tell me what it is?


  • Full instrumentation pack (four ancillary guages plus tachometer) - with volt meter & oil pressure guage.
  • Speedometer, odometer, tripmeter, fuel guage & water temperature guage standard in addition to the above.
  • WARNING LIGHTS: High beam, rear window demist on, turn signal / hazard light, alternator fail, lights on, park-brake on, washer fluid low, radiator coolant low, cruise control indicator and low oil pressure.
  • AUDIBLE WARNING CHIMES: low fuel, lights on, low alternator charge, low oil pressure, high coolant temperature and brake failure.
  • Trip Computer standard featuring fuel consumption figures, distance to empty, average speed & time display.
I found this site, no mention of the fan in a cylinder, but I'll let you figure it out. Hope this helps.
http://www.trueblueford.com/ed_pages/EDfalcon_fairmont.html

May 31, 2010 | 1983 Ford Fairmont

2 Answers

Signal lights, fuel gage, temp gage not working. Could it be the signal light relay? Where is it located?


This sounds like you have blown a fusible link! Check your main fuses first.

Sep 15, 2009 | 1989 Honda Civic

1 Answer

2002grand am dash lights and brake lights not workin at night


check the second fuse panel in the engine compartment for the park lights fuse.

May 28, 2009 | 2001 Pontiac Grand Am SE

3 Answers

1997 Cadillac Catera Brake lights continually engaged at night


The problem is in the stoplight switch. It is located under the dash. When you push the brakes, the switch contact points close. When you let off the brake, the open, turning the brake lights back off. Also your cruise will not work if it is getting a signal that the brake pedal is being pushed.

Apr 29, 2009 | 1998 Cadillac Catera

1 Answer

Looasing electrical system to interior lights, power windows, pow


your regulator is out on the alternator. sometimes it charges other times not. it will quit all together charging if you wait to long.

Feb 26, 2009 | 1998 Ford Expedition

2 Answers

1998 chevy lumina brake lights intermittent.


This is a classic example of turn signal switch failure. On GM vehicles with a multi-function turn signal switch and combination stop/turn/tail lights (all rear lights are behind red colored lenses except for back-up lights) The brake light power is routed through the turn signal switch. This makes it possible for the right rear light to function as a stop light while the left rear turn signal flashes, and vice-versa. When the contacts fail to remain constant the brake lights, and turn signals can become intermittent. The proof that the brake light switch is functioning correctly is that the high center (cyclops) brake light functions properly. Wiring integrity is verified if you can prove that turn signals operate, but that can still be intermittent with this complaint, BUT if you use your hazard switch to turn on all the signals at once, you can verify wiring integrity. This is because the turn signal, and the brake light use the same circuit, and bulb filament in the rear lighting assembly. If any Hazard lights fail to function, check bulbs first, then retest. If all Hazrd light flash correctly and reliably, bulbs, sockets, and wiring have proven integrity, and the turn signal switch is the remaining component in the system which needs to be tested. Unfortunately, this switch requires disassembly of the steering column for service, testing or replacement. If you have never disassembled, and successfully reassembled a GM tilt steering column, I would reccommend professional assistance.

Oct 31, 2008 | 1998 Chevrolet Lumina

Not finding what you are looking for?
1992 Cadillac Seville Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7711 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...