Question about 2001 Toyota Tacoma

1 Answer

Need to replace rh mirror assembly 2001 toyota

Need to replace rh electric mirror assembly 2001 toyota tacoma, what is the best way to remove the door panel so it will go back on tight and not rattle or pop loose in the future or damage the speakers or wiring and what kind of attachmants does the panel have ?,can they be replaced?, I am assuming they are plastic, are special tools needed? I love my little toy we have done some major 4 wheeling and still no rattles so I just hate to tear into it without some heads up. Any input would be great.

Thanks
A Nevada CAT mechanic for 30 years

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 462 Answers

As always it's a plstic clips , if you brake them pulling panel out you can replace them , there also few screws , i think on door handle and lock handle.
use plastic spoon or wide screw driver to pop the panel out.

Posted on Apr 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace " cabin


The 2001 model Aztex has 2 cabin filters, they usually come 2 to a box when you buy them.
The charcoal carbon filters are the best.

Removal:

•Open the IP compartment door.
•Remove the rear inside IP compartment door.
•Open the HVAC module assembly access door
•Remove the RH passenger compartment air filter from the HVAC module.
•Slide the LH passenger compartment air filter to the HVAC module opening.
Remove the LH passenger compartment air filter from the HVAC module.

Installation Procedure:

•Install the LH passenger compartment air filter into the HVAC module opening.
Slide the LH passenger compartment air filter toward the left side of the HVAC module.
•Install the RH passenger compartment air filter into the HVAC module opening.
•Close the HVAC module assembly access door.
•Install the rear inside IP compartment door.
•Close the IP compartment door.

I Hope this information is helpful.

Sep 03, 2011 | 2001 Pontiac Aztek

1 Answer

Need instructions to replace the passenger side mirror and the driver side tail light on a 1999 Ford Taurus 4-door sedan. Thank you, Gary S.


Section 01-09: Mirrors, Rear View 1999 Taurus/Sable Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 06/25/1998 Mirror, Power-Outside Rear View Removal
  1. Disconnect battery ground cable (14301).
  1. Remove front door trim panel (23942). Refer to Section 01-05.
  1. Remove radio speaker grille from cover assembly by squeezing or pinching between thumb and index finger.
  1. Remove two screws from cover assembly.
  1. Disconnect outside rearview mirror wiring connector (C515-LH; C615-RH). Remove wiring guides as necessary.
  1. Remove three outside rear view mirror retaining nuts. Remove outside rear view mirror (17682) while guiding wiring and connector through hole in door.


an0786b.gif


Item Part Number Description 1 17682 Outside Rear View Mirror 2 N621906-S36 Nut (3 Req'd) 3 F8DB-17D699-
AAW Cover Assembly Rear Substrate-LH 3 F8DB-17D698-
AAW Cover Assembly Rear Substrate-RH 4 N808968 Screw 5 F8DB-18B984-
AAW Speaker Grille-Standard (No Badge)-LH 5 F8DB-18985-
AAW Speaker Grille-Standard (No Badge)-RH 5 F8DB-18K901-
BAW Speaker Grille-Mach-LH 5 F8DB-18978-
BAW Speaker Grille-Mach-RH 5 F8DB-238A35-
AAW Speaker Grille-Blank (No Speaker)-LH 5 F8DB-238A34-
AAW Speaker Grille-Blank (No Speaker)-RH A - Tighten to 6-8 Nm (54-70 lb-in) ------------------
Trim Panel, Door Front
Removal
  1. Remove cover behind inside door handle.
  1. Remove screw from bottom of pull cup retaining front door trim panel to front door (20124).
  1. Remove three screws retaining front door trim panel to front door.
  1. NOTE: Do not attempt to remove more than one pushpin at a time.

    Using Rotunda Windshield and Molding Trim Removal Kit 107-R0401 or equivalent, remove the door trim panel by pulling one door trim panel pushpin at a time from the inner door skin.
  1. Disconnect electrical connectors as necessary. Refer to Section 01-14A.
Installation
  1. Follow removal procedure in reverse order.
  1. Replace all pushpins with new pushpins (N808994-S).
Front Door Trim Panel


ar0318d.gif

Jan 14, 2011 | 1999 Ford Taurus

2 Answers

I need instructions on how to replace my driver's side power mirror on my 2007 Toyota Tacoma truck.The cowling is broken although the mirror still rotates. There is an access screw on the bottom of the...


Pull off the triangle shaped cover on the inside of the door panel over the mirror area by prying it off.
Remove the three 10mm nuts behind the cover, unplug the connector and slide the mirror off the door.

Oct 22, 2009 | 2007 Toyota Tacoma

2 Answers

How do you reattach the rearview mirror on a 2001 tacoma Thanks


get a rearview mirror glue kit and follow the instructions.

Aug 02, 2009 | 2001 Toyota Tacoma

2 Answers

Need to replace Mirror Assembly, 03 suburban


Your going to have to remove the inside door panel to get to the three bolts that hold the out side mirror assembly. Once you have the door panel off you'll see the three bolts that hold the mirror assembly, just un-bolt and un-clip the wire harness to the electric/heated mirror. To install the new mirror assembly, just do everything in reveres. Go to Auto Zone and by extra door panel clips, there is a good chance of breaking some of the retainer clips and Auto Zone will have the step by step instructions to replacing the mirror assembly and the removal to the door panel. Good luck and keep me posted. Be glad to help.

Jun 22, 2009 | 2001 Chevrolet Suburban

2 Answers

2001 camry replacing driver side mirror


Pull off the triangular trim panel that is right behind the mirror. It is held on by 2 clips. This will allow you to see all three 10 mm bolts to remove the mirror.

Mar 22, 2009 | 2001 Toyota Camry

1 Answer

RH door mirror assembly


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. Then you can access the mirror assembly.. it's a huge pain to change such a small part

Mar 01, 2009 | 2002 Nissan Xterra

1 Answer

Replace passenger mirror


  1. Remove the door inside handle as follows:
    1. Remove the screw and slide the handle forward.
    2. Disconnect the handle from the control link and remove the handle.
  2. Remove the door trim as follows:
    1. Remove the 2 caps and 2 screws.
    2. Using a screwdriver, remove the door trim upward then disconnect the connectors.
    3. Using a screwdriver, pry the forward of armrest panel and remove the panel.
    4. Remove the 2 screws and tweeter speaker.
    5. Disconnect the connector, remove the 5 screws and speaker.
    6. Disconnect the wire harness and remove the 2 grommets and service hole cover.
  3. Remove the cover and disconnect the power mirror connector.
  4. Remove the 3 nuts and outer rear view mirror.
To install:
  1. Installation is the reverse of the removal procedure.
  2. Tighten the mirror nuts to 8 Nm (71 inch lbs.).

Good luck...

Nov 11, 2008 | 2002 Toyota Tacoma

3 Answers

Replacing RH Side view mirror on a 2006 Toyota Sienna


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Jul 29, 2008 | 2006 Toyota Sienna

Not finding what you are looking for?
2001 Toyota Tacoma Logo

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...