Question about 2005 Kia Spectra

1 Answer

Have cams out of head. need to know chain timeing marks for variable timing. thanks 2005 kia spectra 2.0

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 39 Answers

Get a chilton or hays manual from a auto parts store it will show you the diagram.

listen to me carefully. find out where is piston #1 pull the spark plug out and stick a long flat head screew driver in the hole where was the spark plug for piston #1 and turn the crank-shaft untill the screew driver hits the highest point.
what this means, the pistons go up and down,ok.
now, the screew driver has to come up if it go back down just a little your fucked.

leave the crank-shaft for now. the cam-shaft needs to be properly aligned if not you can damage the valves.

Posted on Apr 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On a 2005 Kia Spectra EX, 2.0L is the intake Lifters and exhaust lifters the same or are they different? Please Please HELP


Veronica,
You should have done your homework before taking the engine apart. If you didn't make sure you put the lifters back in the same place, did you get the camshafts in their correct location as well and did you get the timing marks lined up on the cams as well as the crankshaft?
What would cause no compression what so ever we have replaced the head...
Whatever your problem, you are going to have to start taking things apart until you find the cause.

Feb 06, 2015 | 2005 Kia Spectra EX

1 Answer

How to know the proper timing mark


e21ad08c-0b9e-4c43-850b-6bda4e774056.jpg 0c7bb143-b212-4bc6-b64c-5bdf847f9220.gif this is the 1.8 model.
lager engine model
733764e1-1eaf-4feb-8a0d-478f5e1c125c.gif
3264165c-bebc-4268-b308-2e7f81603732.jpgwould help if you put your engine size on from. but here is 3 engines for kia

Mar 19, 2014 | 2002 Kia Spectra

1 Answer

NEED DIAGRAM ON TIMING A 2005 DODGE STRATUS.IT HAS THE 2.7 IN IT. NEED BOTH THE VIEW OF THE MAIN CHAIN THAT RUNS TO BOTH OF THE HEADS AND TO THE CRANKSHAFT AND WATER PUMP.I ALSO NEED TO KNOW HOW THE SMALL...


Hi, is this all you needed? This engine uses colored links that line up to marks on the timing gears. Please let me know if you have any questions, and thanks for using FixYa.

jturcotte_1456.gif


jturcotte_1457.gif

jturcotte_1458.gif


jturcotte_1459.gif

Apr 04, 2011 | 2005 Dodge Stratus

1 Answer

Head gasket got bent and I have replaced it . Now the problem I'm facing is how to set the crank shaft and the comshaft timing. I need the procedure for engine timing


Timing Chain & Gears Removal & Installation To Remove:
NOTE: Keep the cam chain away from magnetic fields.
Crankshaft set at TDC marks hnda_trk_crv_crank_tdc_marks.gif

  1. Turn the crankshaft pulley so its Top Dead Center (TDC) mark (1) lines up with the pointer (2).
  2. Raise and support the vehicle.
  3. Remove the front tires/wheels. Front undercar splash shield hnda_trk_crv_frt_under_splsh_shld.gif

  4. Remove the front undercar splash shield.
  5. Remove the drive belt.
  6. Remove the cylinder head cover (See section on Valve Cover).
  7. Remove the crankshaft pulley (See section on Crankshaft Damper). CKP sensor and VTC solenoid electrical connectors hnda_trk_crv_ckp_vtc_ele_conn.gif

  8. Disconnect the Crankshaft Position (CKP) sensor connector (1) and Variable Valve Timing Control (VTC) oil control solenoid valve connector (2).
  9. Remove the VTC oil control solenoid valve (See section on VTC Solenoid Valve).
  10. Support the engine with a jack and wood block under the oil pan. Ground cable and upper bracket removal hnda_trk_crv_grnd_cbl_uppr_brckt_rem.gif

  11. Remove the ground cable (1), and remove the upper bracket (2). Side engine mount bracket removal hnda_trk_crv_side_eng_mount_brckt_rem.gif

  12. Remove the side engine mount bracket. Timing chain cover removal hnda_trk_crv_timng_chain_cov_rem.gif

  13. Remove the timing chain cover bolts both from the front to the block and from the bottom to the oil pan.
  14. Remove the timing chain cover.
  15. Loosely install the crankshaft pulley. Compress the timing chain auto-tensioner hnda_trk_crv_compr_tim_chain_auto_tensnr.gif

  16. Turn the crankshaft counterclockwise to compress the auto-tensioner. Lock the timing chain auto-tensioner hnda_trk_crv_lock_tim_chain_auto_tensnr.gif

  17. Align the holes on the lock (1) and the auto tensioner (2), and then insert a 0.06 inch (1.5 mm) diameter pin (3) into the holes.
  18. Turn the crankshaft clockwise to secure the pin. Removal of the timing chain auto-tensioner hnda_trk_crv_rem_tim_chain_auto_tensnr.gif

  19. Remove the auto-tensioner. Removal of the timing chain guide B hnda_trk_crv_rem_tim_chain_guide.gif

  20. Remove the cam chain guide B. Removal of the timing chain guide A hnda_trk_crv_rem_tim_chain_guidea.gif

  21. Remove the cam chain guide A (1) and tensioner arm (2).
  22. Remove the cam chain.
prev.gif next.gif

Oct 11, 2010 | 2002 Honda CR-V

1 Answer

I need the timing marks 4 a 2005 spectra i just changed the timing belt


Click on the following direct Link. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft that you will need; although the quality of the diagrams are not that great. It also has numerous other helpful diagrams for use.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/2005/make/kia/model/spectra/2005_kia_spectra_timing_belt_diagram_marks.htm

Nov 22, 2009 | 2005 Kia Spectra

1 Answer

2000 Kia timing belt specs


this should be the info your looking for.

remove timing cover, on the left cam sprocket(closer to inside of vehicle) you will see the letter (I)for intake and a notch above it on the valve cover align those marks.Next on the right cam sprocket you will see the letter (E) for exhaust and a notch above it on the valve cover align those marks.Last you have a notch on your crank sprocket, align that notch with the arrow just above it.Align all marks then turn belt to revolutions and see if marks are stilled aligned if not try again until you get it right.If so put everything back together and "happy driving!"

Let me know if you need further assistance ok

Aug 18, 2009 | 2000 Kia Spectra

5 Answers

Kia spectra timing belt alingment


For the lower pulley, check that timing mark on the pulley is aligned with timing mark on engine.

On the head, c
heck that "I" mark on intake camshaft pulley is aligned with mark on cylinder head cover and "E" mark on exhaust camshaft pulley is aligned with mark on cylinder head cover.

Apr 18, 2009 | 2003 Kia Spectra

Not finding what you are looking for?
2005 Kia Spectra Logo

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...