Question about 1997 Volkswagen Golf

1 Answer

Hi, im about to replace a head gasket on a 1997 2.8 vr6 mk 3 golf. im unable to obtain a manual and iv got no idea of any torque settings or the tightening sequences? also is there ant thing i should look out for or avoid? thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,309 Answers

Manuals an specs and be had at an auto parts store or a dealership. have the head inspected at a machine shop for warpage or cracks, good idea to get new head bolts and timing belt, good luck

Posted on Apr 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replacing head gasket


Hi
firstly, do you have the equipment to change the head gasket.
ie: a suitable torque wrench for the head bolts?
do you know how to re-time the engine having removed and refitted the timing belt(which you should renew)
I`mj looking at the worshop manual now and I presume you know how to strip an engine
The important part is when you replace the head (having made sure it`s not warped or cracked) and having cleaned all mating surfaces, you should have ten cylinder head bolts the tightening sequence is ____________________________
8 6 2 4 10


9 3 1 5 7
_____________________________

the torque settings are assuming you`rs is a M.40 engine is stage1 30 n/m stage 2: angle tighten 90 degrees stage 3 angle tighten 90 degrees.

Good Luck

Doug

Sep 05, 2013 | BMW Z3 Cars & Trucks

1 Answer

Oil and Water mixing in the reservior


Bad radiator, blown head gasket.

Apr 06, 2012 | Cars & Trucks

2 Answers

1997 cavalier head gasket replacement with a 2.2. Also need the torque specs and sequence for the head bolts


Go onto Autozone.com and sign up for their online repair. It is free to use but you have to register.

Nov 16, 2010 | 1997 Chevrolet Cavalier

2 Answers

Golf iv 1.6 8v cylinder head torque settings


hi to tighten you have to do it in 4 stages as follows
1st stage 40nm leave 5 mins 2nd stage 60nm leave 5 mins 3rd stage 90 degrees leave 10 mins 4th stage 90 degrees then you are done i will try put order on here i hope this works as follows
10 4 2 6 8 front of engine back of engine 7 5 1 3 9

in that order hope this helps

May 10, 2010 | 1986 Volkswagen Golf

1 Answer

Need torque setting for front hub nut on a mark 3 golf vr6


195 ft-lbs I verified this in the Volkswagen repair manual aka the vdubbers bible

Mar 22, 2009 | 1996 Volkswagen Golf

1 Answer

Need to know cylinder head bolt torque specs


Head Bolt Torque For your 1994 Oldsmobile Cutlass Supreme (3.4L SFI DOHC): clearpixel.gif Foot pounds (Final torque) clearpixel.gif Note: Torque sequence --------- | 6 2 3 7 | | 5 1 4 8 | --------- Step 1: torque in sequence to 33 Ft/Lbs Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque. clearpixel.gif clearpixel.gif clearpixel.gif Foot pounds (Final torque) clearpixel.gif Note: Torque sequence --------- | 8 4 1 5 | | 7 3 2 6 | front --------- of engine | 6 2 3 7 | | 5 1 4 8 | Step 1: torque to 40 Ft/Lbs --------- Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque.

Feb 07, 2009 | 1994 Oldsmobile Cutlass Supreme

1 Answer

Seizing brake calliper on Vw Corrado VR6 Storm 1995.


i recomend to go to your local auto parts store and buy rebuild calipers . not much more money than the rebuild kits and they have a warranty.

Jan 29, 2009 | 1994 Volkswagen Corrado

Not finding what you are looking for?
1997 Volkswagen Golf Logo

225 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...