Question about Hyundai XG300

2 Answers

Code 1173 what is code 1173related to?

Posted by on

  • moehorsepowe Apr 28, 2010

    Well now I am not sure, according to the Hyundai Dealership there is no such code. This code was read from an auto parts store. I guess I will have to take it in to the dealer and have a diagnostics performed to find out whats really wrong...

  • yadayada
    yadayada May 11, 2010

    P1173 ETS Target Following Malfunction

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Hyundai Master
  • 76,109 Answers

I HAVE THE LIST RIGHT IN FRONT OF ME. HERE IS THE WEB LINK, GIVE IT TO THE DEALER WHO MUST HAVE VERY POORLY TRAINED TECHS.

http://www.freeautomechanic.com/diagnostictroblecodes11.html

Posted on Apr 28, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 834 Answers

The generic data trouble code P1173 is for (rotor calibration fault), the distributor might not be clocked in right and the ignition rotor is not pointing exactly where the computer wants it be.

Posted on Apr 28, 2010

  • Zaraki Apr 28, 2010

    It sounds to me like the parts store did not read the code right. Those guys at the parts store are not mechanics and half the time they do not even get you the right part for your vehicle, you really should not trust those guys with that kind of stuff.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is a manufactures body code?


Many trouble codes are "manufacturer specific" - the actual code description only applies to that manufacturer. There are 3 or 4 varieties of codes- the best known are P codes meaning "powertrain" codes (related to the engine and drive train). Some are B codes, or body codes, and when you have a Body Control Module, or BCM, a small computer that controls interior electrical circuits and systems (like lights, door locks, etc.), the codes will be stored in the BCM, although the communication between the BCM and the vehicle's main computer-the PCM (powertrain control module) will let the codes be transmitted between them. That is why the main computer can display all codes on the vehicle, whether P codes, B codes, C codes (related to ABS system), or U codes (related to communication links between the modules.

May 29, 2017 | Cars & Trucks

1 Answer

Sun roof won't close 2004 Ford Explorer


The roof opening panel is an electronically operated panel that can be opened or closed by the roof opening panel switch. Actuating the switch in either a forward or rearward motion supplies a ground to the roof opening panel motor. The vent and soft-stop functions are controlled by the roof opening panel motor. These positions are obtained when an internal motor cam opens the roof position switch, removing the ground from the switch. The roof opening panel has an express open feature activated when the switch is pressed momentarily. The roof opening panel is closed by continuous activation of the switch until the sunroof stops movement. This function is controlled by the roof opening panel motor.

Visual Inspection Chart Mechanical Electrical
  • Roof opening panel
  • Opening shield
  • Roof panel frame
  • Opening shield guide feet
  • Central junction box (CJB) fuses:
    • 2 (20A)
    • 29 (5A)
  • Battery junction box (BJB) fuse 1 (60A)
  • Accessory delay relay
  • Roof opening panel control switch
  • Circuitry
  • Roof opening panel motor

  • The roof opening panel does not open or close
  • Central junction box (CJB) fuse:
    • 2 (20A).
    • 29 (5A).
  • Battery junction box (BJB) fuse 1 (60A).
  • Circuitry.
  • Roof opening panel control switch.
  • Roof opening panel motor.
  • Go To Pinpoint Test E .

Do the power windows and power locks work ?

E6 CHECK VOLTAGE TO THE ROOF OPENING PANEL MOTOR - CIRCUITS 400 (LB/BK) AND 1173 (BN/OG)
  • Key in OFF position.
  • Disconnect: Roof Opening Panel Motor C920.
  • Key in ON position.
  • NOTE: Activate accessory delay relay for this check.
  • Measure the voltage between roof opening panel motor C920-4, circuit 400 (LB/BK), and ground; and between roof opening panel motor C920-7, circuit 1173 (BN/OG), and ground.
  • Are the voltages greater than 10 volts?
Yes
GO to E7 .

No
REPAIR circuit 400 (LB/BK) or circuit 1173 (BN/OG). TEST the system for normal operation. If you can't do electrical testing , there is a manual way to close it .
Roof Opening Panel Manual Operation
  1. Remove the overhead console. For additional information, refer to Overhead Console in this section.
  1. Insert a hex-head screwdriver in the center of the manual drive slot to depress the release pin. Rotate the screwdriver clockwise until the roof opening panel is closed.

Jan 13, 2017 | 2004 Ford Explorer

1 Answer

Location of vehicle speed sensor su 1173


2000 Chevrolet Impala

for the best solution of your problem visit this site :))

Jan 09, 2016 | 2000 Chevrolet Impala

1 Answer

Suzuki swift 2011 not start code p1610


not start, so, car cranks, ok and will not start, , RIGHT?
That code is from a real scan tool???????
which engine is there, of the 5 or so?
1.2 L I4 (petrol)
1.3 L M13A I4 (petrol)
1.5 L M15A I4 (petrol)
1.6 L M16A I4 (petrol)
1.3 L I4 (diesel)
in what country is car, (1million posts here and not one ever said that)
and varies by guess what?, COUNTRY.

P1610 (is power train code =p)
i have no books on non USA cars. nor access to them
so not saying COUNTRY , forces me to guess engine and codes.
so i did what you failed to do , i searched on FIXya forum
and found this.
my best guess , would be... as per below. (no real FSM)
I see only 1 , a Reno. wrong car, but my online source shows no usa swift data at all. 2011
P1610 is a resulting DTC from the "LOCK MODE" condition which is set for various NATS malfunctions or an improper key being used. It prevents the car from starting (for some period of time, even if the key issue is rectified).To reset a NATS lock mode, a proper key must be cycled three times again to get the car to start
we only have 2001
here
https://suzukipitstopplus.com/Products/1173-2001-swift-service-manual.aspx

sorry

Oct 11, 2014 | Suzuki Swift Cars & Trucks

1 Answer

Suzuki swift 2002 rear demister relay location


the rear defrost relay location.
its here.
$4 too look...
https://suzukipitstopplus.com/Products/1173-2001-swift-service-manual.aspx

or look at alldata.com
any time.

Mar 06, 2014 | Suzuki Cars & Trucks

1 Answer

What is code p1517 on my 2008 tdi passat


Hi there,

Code P1517 is specific to VW (P0 = generic code), so this code must be retrieved specifically from VW's DTC list.

This code relates to a malfunction in your Engine (MAIN) Control Relay circuit

Please note that I said "Circuit". This doesn't neccessarily mean the Control Relay itself is faulty (although this component will also need to be tested), but means you may need to test every component related to this circuit, and also other related circuts.

Cheers,


"It this has helped you in any way, please rate this solution"

May 07, 2011 | Volkswagen Passat Cars & Trucks

4 Answers

My check engine light come up w/ all these code P0305,P0440,P0441,P0446 what's wrong Thanks


po305 is related to missfire on #5 cylinder
po440 is related to fuel tank pressure
pO441 is for evaporator purge flow malfunction
po446 relates to vent control valve electrical circuit malfunction

missfire is seperate from the other codes
as for the other three codes replace the vent control valve solenoid located near the charcoal canister the oth3er codes can relate to a faulty solenoid

after replacing light will only go out if you clear through a scan tool or three drive cycles of over 10 min each

Jan 10, 2011 | 2000 Lexus RX 300

1 Answer

I've got a 95 Mazda Millenia that is flashing 7 codes, and will not shift into the highest gear.. could it be electrical.. A sensor codes are Po400 p1521 p1522 po740 po730 p1173 p1170. several days ago, I...


0400 is an EGR issue.
1521 is VRIS Solenoid '1' Circuit
1522 is VRIS Solenoid '2 Circuit
0740 is Torque Converter Clutch Circuit/Open
1173 is HO2S Bank 2 Sensor 1 Circuit Fixed (Bank 2 Sensor 1)
1170 is HO2S Bank 1 Sensor 1 Circuit Fixed (Bank 1 Sensor 1)
You know straight away which codes to ignore and which one is causing the problem when you read them off. If in order, EGR we can ignore. The solenoids will not work with no Torque convertor pressure. Start there.

Jul 14, 2017 | 1995 Mazda Millenia

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...