Question about 2000 Saturn Ls 4dr Sedan

1 Answer

(2000 Saturn LS2) The turn signal remains on. Removed the indicator switch from the steering column and can manually reset it. Seems it's in the steering column because it's not resetting it..... no clicking while turning. What do I need to do?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 27 Answers

If you can hear a faint click sound as the steering wheel is returned to the centered position, then my solution may apply. This type of problem was found on a 1997 Dodge Neon. There are two issues on this car. There are a pair of reset tabs that rotate with the steering column. They can move out of position because they are part of an assembly that latches into position. When the assembly is snapped back into position this may resolve the problem. In my case it allowed the turn signal to reset in one direction. Next, I cut a short 0.3" section of 0.25" I.D. aluminum tubing and notched and shaped it to fit over the cam on the end of the reset lever on the turn signal assembly. I crimped it so the piece could not fall off. This made the reset lever cam slightly wider and allowed it to be pushed a little further by the reset tabs. This has worked very well.

Posted on Jun 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i install tumblers in my new ignition switch in my 2001 saturn ls2


unless ur a locksmith changing the tumblers is extremely hard .if you want to change the ignition cylinder you need to to check your key if the key is electronic need dealer to flash new ignition cylinder for car,if non electric u can look for one at a bone yard ,on line ,or dealer --to remove remove the plastic housing around steering column disconnect wires and unscrew the cylinder from column

Aug 15, 2013 | Saturn L-Series Cars & Trucks

1 Answer

I have a 2000 Saturn LS2 that has flashing dash lights, i.e. warning lights, etc., when I start car. All the dash lights flicker and the gauges drop to zero. What is wrong?


same problem here as well. I'm going to try and replace the ignition cylinder. Does yours start? Mine starts, but can't get out of park unless I move key to run (put in neutral) and start again, Issue dash is going crazy and running light are flickering. I noticed yesterday that the turn signal lever is hot, so it might be some short in the steering column

Jun 20, 2013 | Cars & Trucks

1 Answer

Where is the location and # of the turn signal fuse on a 2000 saturn L100?


Since it is both signals out a flasher may also be at fault. The flasher is located with the fuse box, located usually on left side of dash either on the end covered by the door panel(when closed) or near the feet kick panel or next to steering column. While I don't own your particular car this is what i can think of right now.

Nov 03, 2012 | 2000 Saturn Ls 4dr Sedan

1 Answer

Back brake light stay on, replaced brake switch same problem.Truck has over drive and cruies control If you take switch out of circuit the brake lights stay on the same with the turn/hazard flasher.


Your brake lights and your turn signals go through the multifunction (turn signal) switch. It is common for these switches to short internally. Partial disassembly of the steering column is required to replace it. The airbag stsyem must be disabled, then the airbag removed from the steering wheel. Then the steering wheel must be removed to access the screw in the front of the switch assembly. The rest is pretty easy... a few screws holing the lower cover of the dash, the shroud around the steering column and a few connectors to deal with. (see pictures of switch assembly below)
There are two types of these switches available for 2000 S-10. With cruise control and without cruise control. The one WITHOUT cruise control is much more expensive!


dttech_156.gif
dttech_35.jpg

Aug 06, 2011 | 2000 Chevrolet S-10

1 Answer

The high beam indicator is on. The low beams don't work.


You need a new headlight dimmer switch located on the steering column between the dash and the firewall

Jun 03, 2010 | 2000 Mazda MPV

1 Answer

Replace ignition switch and kew switch


***As per Haynes Manual for your Vehicle*** Warning: if your vehicle is equipped with a suplemental inflatable restraint (SIR) system, always disengage airbags before working in the vicinity of the sterring wheel to avoid accidental deployment of airbags.
1. disconnect the negative cable at the battery
2. Remove the steering wheel if it interferes with the access to the steering column covers on your vehicle. Remove the steering column covers.
3. Unplug the wires from the ignition switch, remove bolts and lift the switch off the steering column.
4. Installation os the reverse of removal.

Hope this Helps! I have a an illustration and it looks that the switch is on the left side of the steering column. If you need any information or help removing the Steering wheel or steering column covers let me know! Good Luck.

Feb 10, 2010 | 2000 Saturn SL

1 Answer

What tools do i need to get turn signal switch out


Impact gun.
Steering wheel puller
lock plate removal tool
screwdrivers
1/4 socket set (recomended)
WARNING: AIR BAG SYSTEM CAN BE SET OFF IF YOU DO NOT FOLLOW ALL DIRECTIONS AND PROCEEDURES FOR REMOVAL OF AIR BAG MODULE

Jan 30, 2010 | 2000 Saturn SL

1 Answer

2000 Saturn ls2 Turn Signal


turn signal switch is broken. switch is easy to replace.

Feb 20, 2009 | 2000 Saturn Ls 4dr Sedan

Not finding what you are looking for?
Cars & Trucks Logo

336 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...