I have a 2002 Clk 350 Mercedes Benz making a cricket noise

SOURCE: The security alarm on my

IF ITS A FACTORY SYSTEM U HAVE ITS A DEALER RELATEDD PROBLEM. IF ITS AFTER MARKET ITS EITHER MALFUNCTIONING OR THE IGNITION WIRE IS NOT INSTALL OR HAS LOST CONNECTION. THE THIRD SOLUTION WOULD BE THE ALARM IS IN CAR JACK MODE AND IS TRIGGERED WHEN U OPEN THE DOOR

SOURCE: 2006 Mercedes-Benz CLK 350. Sometimes runs to

Check the pole/cord going to your gas pedel..u may have to take up the carpet.. but it could be a bearing in the pedel..

SOURCE: need a radio code for a mercedes benz clk 430 2001

You can get the code from any Mercedes dealer around you. Or you can have the code by taking the radio out and take the serial to a radio repair shop and they can get the code from the serial.

mx5turbo92

• 545 Answers
• Posted on Dec 17, 2009

SOURCE: i need the mercedes benz 1999 clk 430 radio code

AR82.60-P-7502-01A Coding Radio
(MODEL all with CODE (750) Radio Becker Europa 2000 with CODE (751) Radio Becker Grand Prix 2000 with RDS)

1. If the radio is disconnected from the power supply, it is not operational when re-connected. After switching on the ignition and the radio, the readout CODE appears in the display.
2. The code number for the radio is advised to you on the enclosed CODE CARD.
3. To enter the first digit of the code number, you have to continue pressing station button 1 until the correct digit appears in the display. Adopt the same procedure for the second, third and fourth digits.
4. Once you have entered the correct code number with the station buttons 1, 2, 3, 4 and confirmed the entry with the SEEK button (press down), the readout CODE disappears. The radio can now be operated.
5. If you enter a wrong code three times, you must wait 15 minutes before making a new entry. In addition, if 9 incorrect entries are made, the radio will then not operate for 24 hours. During this time the radio and the ignition (terminal 15) must remain switched on.

1. If the radio is disconnected from the power supply, it cannot be operated by simply reconnecting. After switching on the ignition and the radio the word "CODE" appears in the display on the radio.
2. The code number for the radio is given on the enclosed CODE CARD.
3. Enter the code number with the station button, e.g. number 1, station button 1. After entering the first number the word "CODE" disappears and the number entered appears followed by 4 dashes. The next character to be entered flashes. After entering all five numbers, the first character starts flashing again. In this state the code number can be written over as frequently as desired. A correction can be made only by entering the complete code number again.
4. Confirm code number: Press TUNE, AUTO/SEEK or SC button. The radio automatically switches on and indicates the radio station or frequency stored with station button 1.
5. If an incorrect code number is entered and confirmed, the word "CODE" appears again on the display. If an incorrect code is entered three times the word "WAIT" appears on the display and the radio locks up for approx. 10 min. If the code is entered incorrectly three times again the radio locks up again for 10 min. Three more incorrect entries (a total of 9 incorrect attempts) increase the lock-up time to 60 min. Another three incorrect entries lock up the radio for another 60 min. The waiting time runs only when the radio is switched on.

SOURCE: Mercedes Benz car will not shift out of park. It

You are putting your foot on the brake before you try to move the shift lever, right?

Most cars have a locking device that prevents the shifter from moving unless the motor is running (key inserted into the wheel lock and on) and the brake petal is depressed.