Question about 2002 Chevrolet TrailBlazer

1 Answer

Have no break lights - 2002 Chevrolet TrailBlazer

Posted by on

  • rolds99 Apr 28, 2010

    all 3 brake lights do not work. parking and blinkers work ok.

  • rc May 11, 2010

    Does the high mount, or 3rd brake light work? Do you have regular parking lights working? Do blinkers work?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 417 Answers

That would suggest to me that the stop light/stop lamp switch/module may be faulty. Or may have become disconnected. I believe it is tucked up under near the brake pedal. If you have a tow package with a wiring harness for towing a trailer, just check to see that it's not shorting out, or damaged.

Posted on Apr 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1994 Toyota t100 left break light will not come on when the break peddle is pushed


check for a problem ground for that light as it is grounding out through another light circuit

May 29, 2018 | Toyota Cars & Trucks

1 Answer

How can I turn off the rear parking lights


Normally all parking lights are controlled by the light switch. First turn turn on the parking lights and second turn turns on the head lights.

Are you sure it is not your break lights staying on? if this is your break lights - look at break pedal for break light switch staying on or not adjusted correctly. Does your car battery gets drained from your break lights staying on?

Feb 23, 2015 | 2011 Cadillac SRX

1 Answer

2003 Ford Fiesta, Parking lights come on when break is applied


Check for dual filament lamps installed backwards and wrong type of lamps installed

Feb 26, 2013 | 2003 Ford Freestyle

1 Answer

Tail lights work but break lights do not work


Chack the break light switch which on my car is on the break tank. There should be 2 wires going to the switch. If you short them out and the lights work then replace break light switch.
It might be the earth connection to break lights. If there is an earth lead remove clean and replace.Then give the connection a coat of paint.

Mar 15, 2012 | 1999 Lexus RX 300

2 Answers

No break lights ,tail lights on a 1999 suberban check the fuse and they are all good when i turn my lights on and put on the turn singal and press on the break they start blinking very fast when i thouch...


it sounds like a ground problem...sounds like the ground is trying to go through the bulbs to make connection....check all ground wires battery, engine and rear frame...

May 27, 2011 | 1999 GMC Suburban

1 Answer

Please help.I have a 2005 Dodge Caravan.When I start the van the rear break lights would turned on automatically.When I step on the break the lights stays the same,no indication of breaking from the rear...


You have a bad break switch. It is located under your dash, above your break pedal. The stem of your break pedal, when pushed down, activates the break switch. When you push, the break light comes on. It is chrome looking. It is a round cylinder. That should fix you up. If you need anything else, please let me know. Thank you for choosing FixYa.

Feb 15, 2011 | 2005 Dodge Caravan

1 Answer

My colorado break lights aren't working I checked the fuse and the balbs and they all look good. What should I check next


break light switch mounted under the break pedal or on the main break cylinder.If you shortcut the wire on the switch the break lights should light up.

Jul 15, 2009 | 2005 Chevrolet Colorado

1 Answer

Tail break lights don't work. Window break light does work however. Bulbs have been replaced.


Check the brake light fuse. The high mounted brake light (third brake light) is on a different circuit than the brake lights. Hope this helps.

May 23, 2009 | 1998 Mercury Mystique

1 Answer

Break lights


welcome to fixya

there is a break switch under the dash connected to the break itself once you press the break the switch trips and the lights go on it sounds like that switch is gone you need to replace

hope this helps you out have a good day

Jul 11, 2008 | 1995 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
2002 Chevrolet TrailBlazer Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

80531 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...