Question about 1998 Hyundai Elantra

1 Answer

My blinkers quit working. They use to work some of the times. I can here it click once when you turn them on and nothing after that. I can not figure out were the clicking is coming from.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 57 Answers

You may want to check your fuses and relays if you have an owners manual it will tell you where the fuses and relays for your specific problem are. also changing the bulbs is pretty easy and good insurance to come to a fix also the steering column may be broken or worn where the turn signal lever is hope this helps good luck

Posted on Apr 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn signals not working on my 98 Mustang. Hazards work fine. Already replaced the multifunction switch. Didn't help.


Sounds more like the flasher to me,in the drivers side fuse panel
square box ,looks like a relay , 5 male spade connectors on back.

Mar 24, 2014 | Ford Mustang Cars & Trucks

1 Answer

Blinker wont click/blink


If the right side works correctly than you have a burnt out bulb on the left side. Compare the bulbs that are blinking on the right side to the bulbs that are not blinking on the left side. You should be able to figure out what bulb is not working.

Feb 09, 2012 | 1996 Pontiac Firebird

1 Answer

I have a 1996 gmc sonoma.The blinkers quit working.I tried the flasher and it showed that both sides were blinking.I turned off the flasher and tried the blinkers and they worked,well at least one time.I...


You have some burned out filaments. On dual filament bulbs the "blinkers" I am taking it to mean the turn signals. They are one filament. The "Flashing Caution lights, work on a relay circuit, which sends a larger amp current into the opposite filament then the turn signal. Check front & rear bulbs.

Sep 08, 2011 | 1996 GMC Sonoma

1 Answer

My blinkers and flashers all quit working at the same time. Indicator lights in the dash won't even light up. Do flashers and blinkers run off the same fuse?


The do not run off the same fuse but they do run off the same blinker. Try turning on the key, click the left/right (check both) turn signal and then operate the 4 ways on and off at the same time. Work the 4 way switch back and forth 10 to 25 times and see if you get any short winks or blinks from the system.
Turn signals are usually on their own fuse in the glove box and hazard are on with the brake fuse. If this does not work, I would look at the blinker. It is possibly bad. Check each pin of the blinker and see if there is power there when you turn on the 4 ways or turn signals. Replace Blinker. Make calls to parts stores and dealer for location of this blinker.

Mar 21, 2010 | 1995 Buick Regal

1 Answer

Blinker doesnt quits work every once in a while. they


its a wiring problem...mine does it too. I found pressing the hazard lights button a couple times makes the signals work again

Jan 21, 2010 | 2002 Pontiac Grand Am

1 Answer

Blinkers work at start, then stop. Then work as car is restarted


change the blinker relay Or what i call flasher unit

Jun 03, 2009 | 2001 Audi A4

3 Answers

Turn Signals/blinkers


Did you double-check to be sure the fuses are intact and not blown? If they are OK, it could be a turn signal relay or the switch itself (I have firsthand experience with the switch failing with respect to headlight operation, so there's no reason to believe that it couldn't fail for turn signal operation as well).

If you find that it's the switch, reply here and I can walk you through its replacement - it's about a five minute job.

Aug 10, 2008 | 1992 Honda Accord

1 Answer

Brake lights quit working. All fuses and bulbs are good. There is a blue wire labeled "electric brake" hanging by the pedal switch. where is this supposed to go?


I have had this problem for over 8 months. Break light would work, blinker would not . . . then blinker would work, break light would not . . . turn headlights left break light would go out . . . FINALLY my 75 year old father figured it out !!!! It was the STOP SWITCH - even though it showed it was working - Please replace it anyway !!! It's only $14.00 for the part. Also the other part needing replaced was the Flasher Relay - $34.00 !! NOONE not even JEEP could figure out this problem !!!

Jul 20, 2008 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
1998 Hyundai Elantra Logo

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...