Question about 1999 Ford Expedition

1 Answer


Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,796 Answers


For your vehicle, there is already available the pulley with the bearing for about $13 at AutoZone.

To install, set a long rachet or breaker bar with a 15 mm socket on the pulley bolt, and remove belt, once belt is removed, turn rachet/breaker bar the oposite way to loosen bolt, remove old pulley and install new one.

Don't forget to rate this post, Good Luck!!

Posted on Apr 28, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I change the tension pulley on a Mitsubishi magna 2005 model v6

its a serp belt

drop the serp belt off

the bolt holding the tension pulley bolt to the tensioner might be right direction thread undo

you can hit out the bearing and get a new bearing
for the existing pulley

or buy a plastic gates pulley that dont last as long

3rd gen magna repair manual pdf
this works once you find the pdf version


Nov 10, 2016 | Mitsubishi Cars & Trucks

3 Answers

Why belt keeps shredding

usually due to a bad bearing, or from resistance due to a frozen or failing assemble, as in power steering, alternator, or an idler. The best way to determine is to remove the belt and check all pulleys for play and resistance.

Feb 10, 2011 | 2000 Chevrolet Venture

2 Answers

Rattle noise coming from belt

this could be a bad pulley or alternator, you will need to remove the belt and spin the pulleys by hand to see which one is making noise, it could also be the ac compressor pulley, start there.

Sep 04, 2010 | 2008 Chrysler Sebring

1 Answer

Belt drifts in towards engine and is been cut up as a result

One of the pulley's are warped or the tension pulley bearing are gone causing wobble which is letting the belt run off. It most likely is the tension which isn't hold the proper tension on the belt giving it the ability to run off. I would try changing the pulley first for the tension.

Aug 17, 2010 | Toyota Celica Cars & Trucks

1 Answer

My truck is making a whinning noise when you crank it up. It then gets louder as you give it gas.

You could have a Serpentine belt going bad or the tension pulley has gone bad. The noise can also indicate a bad alternator bearing and your going to have to replace the alternator soon. The alternator will still keep working and producing 13 to 14.5 volts, but the bearing may be bad and will fail soon causing your alternator to total fail then. Good luck and hope it's a simple serpentine belt or tension pulley that needs to be replaced other then a alternator. If it's the Alternator that has gone bad, Auto Zone will have the replacement part and can give you the step by step instructions to getting the job done with common tools.

Mar 05, 2010 | 2004 GMC Envoy

1 Answer

Tension spring and pulley fell off

that seems to be a problem on several types of cars .. the pivot bearing freezes up so the tension spring no longer limits force on the belt .. then the pivot may break at a time of high stress .. you can replace the entire assembly with factory or replacement parts .. then its a good idea to inspect it now and then to make sure its free (pushing on the belt should cause movement of the tension pully .. there is usually a nut on the pully that you can use to move the pully to relieve tension so the belt can be installed ..

Jan 19, 2010 | 1988 Buick Regal

1 Answer

Tension belt puller making noise

You can get a replacement pulley at your local auto parts store for less than $50.Don't let them talk you into replacing the tensioner unless it's visibly bad.It's almost always just the bearing in the pulley .Go to your local auto parts stores website to see if ones available as well as it's cost.

Jan 01, 2010 | 2004 Ford Taurus

1 Answer

How to tension belt

Your car should have a self adjusting system. If the belt is on the pulleys and it's not tight, the tension pulley is seized up or the bearing in the pulley is shot. The best solution is to replace the tension pulley.

Jun 27, 2009 | 2000 Ford Taurus

3 Answers

The tension pully 4 serpintine belt making funny noises

The bearings in the tensioner are shot, and it's time to replace it. This is also a good time to replace the serpentine belt.

Jun 03, 2009 | 2001 Pontiac Grand Prix

2 Answers

My belt shredded due to the bearing going bad for the pulley and

the belt and the tensioner bearing will cost installed about $250.00

Apr 09, 2009 | 1997 Buick LeSabre

Not finding what you are looking for?
1999 Ford Expedition Logo

Related Topics:

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers


Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides