Question about Cars & Trucks

1 Answer

Brakes where making noise when applied and going almost to the floor then abs lights and check engine put new pads on front and rear along whith new master cylinder and blead them wife drove it said it was still doing it so i disconnected battery to clear computer i drove it and was fine now thismorning she says its still doing it and lights are comming back on the car is 02 grand am gt v6

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 106 Answers

Did you bleed the air out of the master cylinder before you instaled it. thats the only way to get the air out of it.if not then you have to pull it out and bleed everything

Posted on Apr 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 silverado feels like the brakes are stuck on and ABS light on


You may be right in that the brakes are applied.
The ABS would need to be checked for trouble codes to proceed.
You could also lift one wheel at a time to see if the brakes are on.

Feb 05, 2014 | Chevrolet Silverado Cars & Trucks

1 Answer

The abs lighton my 2000 mercury mystique comes on and the brakes make loud noise


The noise you hear from the brakes? is it a scraping grinding noise? if so your metal to metal on one or more of your wheels and that can cause the ABS to mal-funtion. If the brakes are good then it sounds like the ABS module is failing. I wouldn't remove the fuse because other systems may be relying on that fuse to work. Find the ABS module and dis-connect it. To find out more information on your ABS system go to your local library.

Mar 14, 2013 | 2000 Mercury Mystique

1 Answer

We had a recall 03 windstar ABS light was on all time we had front and back brakes replaced ford checked said rear axle ok but, light is still on and brakes make a terrible noise and sometimes they go to...


I own a 2001 Windstar. Your noisy brake problem could be nothing more that new brakes being broken in. I have done many brake jobs on my 2001 Windstar as well as other vehicles that I have owned. To prevent this problem from occuring, I apply a thin film of Disc Brake Quieter directly to each brake pad during the installation process. This quiets the brakes during the break in period. I hope this helps.

Jan 09, 2011 | 2003 Ford Windstar

1 Answer

ABS light is on, brake pedal makes noise


sounds like the r/f wheel brg needs replacing when you are coming to a stop and you hear the pedal making noise does it pull slightley to the left this would conferm the r/f is the problem

Jan 02, 2010 | 2000 Oldsmobile Bravada

1 Answer

Brakes go to floor -- hissing noise and ABS light on-


if you hear a hissing noise, check first the all the brake lines are not leaking, if that is ok check the vacum line on the master cylinder

May 09, 2009 | 2002 Kia Sedona

1 Answer

2001 S Type Jaguar ABS and Traction Control fault lights on


Hi First I suggest that you get a diagonostic check on ABS system. and then a visual inspection of the brakes. Warped brake rotors do not make noice, but the steering will start to judder when brakes applied at around speeds from 40 up . Possible cause that the vehile picked up something from road such as nylon/ plastic/stone Mike

Apr 24, 2009 | Jaguar S-Type Cars & Trucks

1 Answer

ABS light comes on


Per your description, I would suspect you have a faulty wheel speed sensor. Take you vehicle to your local Auto Zone or Advanced Auto and have the codes pulled for free. Write them down and let me know what they are and we can go from there.
Good luck.
Regards,

Mar 05, 2009 | 1997 Chevrolet Cavalier

2 Answers

Abs light on


Get your abs checked out. If you want, check it yourself on an empty street, just be ready to have a dead spot on your tires if your not quick.

drive as at a decent speed where allowed (5 mph should be good) and floor the breaks... If your abs works, then you need to find out why the light is on. If they dont work, then you know that something is wrong with the ABS module in your car and also need to get it checked out.

Listen to the car... if it tells you somethings wrong (ie- lights on the dash..) usually something is.

Happy Hunting.

Aug 02, 2008 | 1997 Acura Integra Type R

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...