Question about 2002 Honda Passport
I have a 2002 Honda Passport. The chedk engine light and reduced power come on - vehicle will hardly move. The throttle sensor, gas pedal sensor and computer have been replaced. The only other recent work was spark plug replacement using NGK.
The Passport is notorious for bad fuel pumps/tanks. The amount of rust that some have caused a buy back through Honda Motors. Replacing your fuel pump should solve the problem.
Posted on May 06, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jul 15, 2016 | 2001 Honda Passport
Jun 05, 2016 | 2005 GMC Envoy
Limited throttle mode--The ECM will continue to use the accelerator pedal for throttle control, however, the maximum throttle opening is limited.
Throttle default mode--The ECM will turn OFF the throttle actuator motor and the throttle will return to the spring loaded default position.
Forced idle mode--The ECM will perform the following actions:
Limit engine speed to idle by positioning the throttle position, or by controlling the fuel and spark if the throttle is turned OFF
Ignore the accelerator pedal input
Engine shutdown mode--The ECM will disable fuel and de-energize the throttle actuator.
Did you have it checked for DTC's - diagnostic trouble code's related to the reduced engine power ?
All so has APP sensor gas pedal !
Accelerator Pedal Position (APP) Sensor
The accelerator pedal contains 2 individual accelerator pedal position (APP) sensors within the assembly. The APP sensors 1 and 2 are potentiometer type sensors each with 3 circuits:
A 5-volt reference circuit
A low reference circuit
A signal circuit
The APP sensors are used to determine the pedal angle. The engine control module (ECM) provides each APP sensor a 5-volt reference circuit and a low reference circuit. The APP sensors provide the ECM with signal voltage proportional to the pedal movement. The APP sensor 1 signal voltage at rest position is less than 1 volt and increases to more than 4 volts as the pedal is actuated. The APP sensor 2 signal voltage at rest position is less than 0.6 volt and increases to more than 2 volts as the pedal is actuated.
Your best bet is take your vehicle to the dealer !
May 03, 2016 | Cars & Trucks
Dec 31, 2015 | 2002 Chevrolet Chevrolet TrailBlazer EXT...
May 04, 2015 | 2003 Chevrolet Chevrolet TrailBlazer
Dec 19, 2014 | 2002 Chevrolet TrailBlazer
May 12, 2017 | 2004 GMC Sierra Denali
Apr 16, 2017 | 2007 Chevrolet Chevrolet Impala LT
Jan 22, 2011 | 2002 Honda Passport
Dec 01, 2010 | 2002 Honda Passport
570 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: