Question about 2001 Hyundai Accent

2 Answers

How do i take out the bulb from its socket? i have taken the bulb out of the ruber boot but cant get the bulb out of its socket. is it supposed to be stuck with the socket? or do i have to pull it out?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hyundai Master
  • 5,763 Answers

It depends on which bulb your are talking about, if its a headlight bulb then you remove the connector and replace the rest, if it a park or brake light bulb then you push in and turn counter clockwise, heres pictures of bulbs to show you,HOPE THIS HELPS.how do i take out the bulb from its socket? - 23a9764.jpg0512410.jpg

Posted on Apr 28, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 32 Answers

You have to pull it,gently of course.The rubber boot is only there to insulate it from water

Posted on Apr 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace 1999 ford sable brake light


Push the lock on the bulb socket & turn the socket

Oct 01, 2014 | 1999 Mercury Sable

1 Answer

Replace a 2004 headlight light bulb


The Head Light Bulb,can be removed from the back of the headlight under the hood,you'll have limited space to work,but reach in to the back of the assembly, you'll feel a couple wires that go to the bulb socket,you'll need to pull back a rubber boot over the bulb socket,and very easy turn the whole socket until it releases from a wire hold down,and pull it out,remove bulb from wiring socket and replace it just the reverse way you took it out, DON'T touch the Bulb its self with your fingers. Ck the number on the Bulb replace it with a Compatable Bulb.

Jan 05, 2012 | 2004 Lexus ES 330

1 Answer

Is the fuel pump supposed to be loose in the bracket inside the tank?


Some just sit in ruber boots, and are held in place by the hose it pumps out of . so yes they can be wiggled around.

Nov 13, 2010 | 1987 Mercury Grand Marquis

3 Answers

Need to change a turn signal & back brake


PLEASE DON'T FORGET TO RATE!!!

Rear Turn Signal, Brake, & Marker Lights
  1. Disconnect the negative battery cable.
  2. Open the trunk.
  3. Unfasten the nuts or other retainers from the rear trim.
  4. Unfasten or release the housing cover retainers.
  5. On some vehicles, you may have to remove the rear fascia/body panel and light assembly to get to the sockets.
4fd081a.gif
On some vehicles, such as this 1986 Grand Am, you must remove the rear body panel with the lamp

Depending upon vehicle application, remove the lamp socket either by rotating it counterclockwise (approximately 1/4 turn) until the plastic tabs disengage, or by squeezing the metal tangs while pulling the socket from the light assembly

087792c.gif
Remove the lamp socket assembly by turning it counterclockwise, then pulling it out

Generally, side marker lamps use small bulbs with flat, blade-type bases, and tail lights/turn signals use larger, round-based ("bayonet") bulbs.
  1. Remove the bulb from the socket using the appropriate method. Bulbs with blade-type bases pull straight out, while those with round bases and protruding pins (bayonet-type bulbs) must be depressed, then rotated counterclockwise (approximately 1/8 turn) before pulling out.
4b5c3aa.gif
Remove the side marker bulb from its socket by pulling straight out

To install:
  1. Secure the bulb in the socket using the appropriate method. Bulbs with blade-type bases push straight in, while those with round bases and protruding pins (bayonet-type bulbs) must be inserted, then depressed and rotated clockwise (approximately 1/8 turn).
  2. Install the lamp socket using the appropriate method. Depending on the type of socket, either engage the plastic tabs, and rotate the socket clockwise (approximately 1/4 turn), or push on the socket until the metal tangs engage.
  3. Install the housing cover nuts.
  4. If removed, install the rear fascia and light assembly.
  5. Install the rear trim.
  6. Connect the negative battery cable, then check the operation of the rear lights.

Oct 17, 2009 | 1995 Buick Skylark

3 Answers

I cant seem to get lightbulb out


if it is on an 2001 eclipse there is a steel locking clip holding it, remove the boot then release the spring bar if you can't there is a screw holding it just remove the screw and wiggle the clip off

May 28, 2009 | 2001 Mitsubishi Eclipse

1 Answer

Cant figure out how to replace the front signal light bulb


  1. Align miniature bulb and push straight into socket.
  1. Index the smallest tap for locating the socket and rotate the socket clockwise to the stop.
most sockets rotate 1/4 or 1/2 turn

May 08, 2009 | 1997 Lincoln Continental

1 Answer

2002 ford taurus right signal and brake light does not work


If the bulb taken out had a plastic base on it, it might have melted a little in the socket. Take the new bulb out look in the socket if there is black on the contacts then just clean them off with a small knife.

Jan 07, 2009 | 2002 Ford Explorer

1 Answer

Day time running lights


.Lights only come on when vehicle is in drive. There is no switch for it. If the lights still dont work check the bulbs,They go bad all the time and you may find a bad light socket. When you pull the bulb out the socket will look burnt and probably need replaced.I run into this problem frequently. You have to replace the bulb with the same number bulb you have .

Dec 13, 2008 | 2000 Chevrolet Silverado 1500

Not finding what you are looking for?
2001 Hyundai Accent Logo

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...