Question about 2004 Dodge Ram 2500
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I had the same problem on a 94 dodge with the cummins. It seems the crank sensor that reads from a notch on the harmonic balancer was the problem Without this sensor reading that the engine is running the alternator wont charge. Possibly the same problem with yours
Posted on May 03, 2009
'07 cummins engines are not to smoke at all. Cold, hot or upside down. If its smokin, its broken is the motto. '07 's are common rail fuel systems. I think you may have the DPF and the DOC exhaust system needs looked at. If no codes, have the dealer double check with ENSITE or comparable programs to check the engines crank and cam possitiion sensors to make sure they have the same rpm. you could have one going out. If just at startup you have smoke, may just be valve seals leaking. Good luck hope this helped.
by the way unburned fuel is black not white, thats oil...
Posted on Dec 02, 2009
you'll notice on your valve cover gasket there is two connectors.. the one up front is your 1-3 the one in the rear is your 4-6... you can remove your valve cover and check the connections from the injector connectors to the
connectors on the valve cover.. check for an open.. however you could also have a fault internally in 1 of your injectors in that bank as well.. hope this info helped..
Posted on Feb 03, 2010
Tips for a great answer:
Aug 29, 2015 | Cars & Trucks
Mar 30, 2014 | 2002 Dodge Ram Pickup 3500
Nov 16, 2010 | Dodge Sprinter
Aug 06, 2009 | 2004 Dodge Ram 1500
Aug 24, 2008 | 1995 Ford Escort
Aug 21, 2008 | 2008 Dodge Ram 2500
Jun 29, 2008 | 1991 Plymouth Colt
144 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: