Question about 2008 Chrysler Sebring Convertible

1 Answer

I have a 2008 sebring...top lifts up but will not go down. Top seems off track to me. Dealer said it needs a "bow kit" which looked like 2 metal brackets. said they were bent. any suggestions???

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 106 Answers

The mechanic is right. check hinges for bends.some people lift it up or put it down while moving,and that jacks the motor and hinges up. are you one of those people???

Posted on Apr 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chrysler Sebring 2008 headlight assembly removal


some times headlamp units have a plastic retaining clip on the underside of headlamp, does the headlight move from side to side? try to pull the headlight back from the top of unit then lift up the headlamp unit, if not it could be the headlamp adjusters holding unit in place.

Dec 06, 2013 | 2008 Chrysler Sebring

1 Answer

2008 sebring convertible when top is up trunk will not close


Mine took several hard slams to latch, with top up or down. Finally got dealer to adjust the latch which they originally said wasn't possible. Wore grooves into the latch rod while it was out of adustment, but at least now it closes.

May 03, 2011 | 2008 Chrysler Sebring Convertible

1 Answer

Trying to change spark plugs. 3 are visible. other are under a covering and don't know how to get the cover off. Also, on the convertible, something was bent and top will not go all the way down.


some of the covers have 1-2 bolts holding them down, normally 1 on each side, then there are some of the plastic covers that just pop straight up, and off, check yours for these suggestions. on the convertible top problem, raise up top slowly, and then check the areas of where it goe's back down to make sure nothing is restricting it from going all the way down. also check the metal arms that hold the top in position.

Apr 05, 2011 | 2008 Chrysler Sebring Convertible

1 Answer

Need proper steps for convertible top operation


The top can be used as a sunroof or taken off completely. For the sunroof, you only have to unclip the two clips by each sun visor, and fold the front bow back so it sits on top of the roll bar. There is a velcro strip that goes through a hole in the front bow, to keep it in place.
To totally take the top off, you again uncleip the 2 clips by the sun visor. When the front bow is moved partway back, the material on the front bow is loose. There are sliding clips on the front of the convertible top that are slid along the front bow, so that the material is removed from the bow itself. Along each of the doors is an elastic clip that needs to be removed. Now the front of the top is pretty loose. Around the rear windows is a metal bar, with fabric snapped around it. Undo the snaps. Then forcefully push the metal bar outwards. The material around the rear window area can then be removed from around the metal bar. At this point, you can probably unzip the rear window. There are 2 pieces of plastic that slide into plastic grooves at the very rear of each corner of the car, that hold the rear of the top down. You just pull the rear of the fabric away from the rear corner of the car. And that's it.

Dec 06, 2010 | 1994 Suzuki Sidekick

1 Answer

Top flashing in odmeter with top down


Hi as the car is still covered under warranty take it back to the dealer and get them to do it FOC,probably just a micro switch needs setting up .

Jul 29, 2009 | 2008 Chrysler Sebring Convertible

Not finding what you are looking for?
2008 Chrysler Sebring Convertible Logo

Related Topics:

249 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...