Question about 1995 Ford F150 Styleside Regular Cab

2 Answers

Why new shock adsorbers on my truck not working how it should

Posted by on

  • 2 more comments 
  • Luis Leal Apr 28, 2010

    the new shocks are workings as bad as the old ones.
    my truck bounces as going down the road, or is it cause I put some cheap ones

  • Luis Leal Apr 28, 2010

    my truck bounces will driving down the road as bad as with the old ones and tires are wearing out uneven or is it cause its cheap shocks

  • Anonymous May 11, 2010

    What is the question? What's not working?

  • uno_1 May 11, 2010

    What is it doing/not doing differently?



2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 84 Answers

I agree with drsinister69... you may need to take a closer look at your springs... Also, i know it sound stupid but, check your tire pressure and bushings... i know with my truck plus or minus 10 lb of tire pressure can drastically change the driving characteristics...

Posted on Apr 28, 2010

  • uno_1 Apr 28, 2010

    ...also, regarding the tire wear, you should definitely bring it in for an alignment... tow, caster, camber all effect overall ride quality....


  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,317 Answers

You may have some worn coil and/or leaf springs. Unless you got some defective shocks? Or did you get a sport or after-market shock?

Posted on Apr 28, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What are some causes of CTM-1 capacitors blowing?

capacitors are in the system to adsorb current flow and then discharge it back at the appropriate time
For them to fail indicates is incorrect voltage being applied that is altering the current flow

Mar 02, 2016 | Cars & Trucks

1 Answer

Front is low !!

To alter the vehicles ride hight is a drastic and costly solution. The shock adsorbers will not alter the ride hight as it's the strut assy that determines the vehicles hight, Also ensure there are no excessively heavy items in the trunk . A broken exhaust mounting will lower underside clearences. Check and inspect all mountings. It would be worth measuring your kerd side height with a similar vehicle. I presume you don't mean , side skirts added at a later date on vehicle. Good Luck

Apr 11, 2010 | 1999 Mercedes-Benz E-Class

1 Answer

Put new shocks on, now car is not leveling out 2001 cadillac dhs

did you re hook the air leveling hoses to the new shocks
are they the right shocks
if so check the airpump on the engine to see if it is working
also check the fuses / and the leveling sensor

Mar 08, 2010 | 2001 Cadillac DeVille

1 Answer

Rear auto leveling system shock replacement. Can you use Monroe gas shocks? Monroe air shocks?

Gas shocks won't work but the air shocks should get you "up" and running again.

Dec 07, 2009 | 1991 Chrysler New Yorker

1 Answer

The shocks on the back are not working properly.

push down on the back of the car if it bounces more than once it needs new shocks, also check for leaking fluid from around the shock seals at the top of the shock, if leaking replace

Oct 13, 2009 | 1991 Lincoln Continental

2 Answers

Sqeaking noise front passenger side. When you bounce the front end it squeaks like crazy.

could be a shock adsorber,ball joint,control arm bushing,sway bar link,inspect frt end or have it inspected!

Sep 15, 2009 | Hyundai Motor 2000 Tiburon

1 Answer

Air adjustable ride control, not working with new shocks

a common problem for this is when the hook up the shocks, the air line plugs in the rubber o-ring is missing. go back to the shop that did it. if you did it, go the the dealer and get 2 new o-rings and install them between the shock and air line. best of luck.

Aug 06, 2009 | 2003 Pontiac Bonneville

2 Answers

Rear Air Shock Problems

The car will still run level due to the fact the springs are holding them up. If the shocks are wet there internal seals are shot, so it is time to replace them.

Dec 13, 2008 | 2000 GMC Jimmy

1 Answer

Removal and replacement of lower shock bushing while still on car?

Burned out the old bushing, cleaned up the shock mount and pressed in the new bushing using two 1 and 1/4 sockets and a bolt and nut tightning to press the new bushing in. Worked like a charm. Better than Jaguars solution of removing the shock. Oh yes, light grease on the bushing and shock mount. Paul

Jul 15, 2008 | Jaguar XJ8 Cars & Trucks

Not finding what you are looking for?
1995 Ford F150 Styleside Regular Cab Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

5687 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides