Question about 2001 Ford Taurus

2 Answers

Got a little miss and check engine light is on

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I just replaced my coil pack and spark plugs and spark plug wires and now my car runs like a charm. And mine was missin so bad it would evev ecselurate

Posted on May 04, 2010

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 31 Answers

Sound like you need a minor ignition tune-up. I will take an educated guess and say that if you were to have the codes read from the ECM (engine control module) they would be P0300 to P0306 which would mean you have an engine misfire. You can go to one of your local consumer automotive parts houses and have the codes read for no charge (because they want to sell you some parts) and go from there. Sounds like a set of ignition plugs and ignition wires may fix your problem. Pay close attention to the firing order of the ignition wires before you remove them if you do it yourself. Firing order on top of ignition coil pack. Good luck

Posted on Apr 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

00linc LS v8 has a little missing at times . not noticeable on overnight start up ,after driving for a while you can feel it when accelerating at times then smooth out an run like great.no ck eng lite


If the is misfiring then the check engine light will blink and a code will be set for the fault, so if you have no light you do not have a misfire it has to be something else going on, have you had the fault codes read yet? Do that, any Autozone will read them for free, just ask for a OBD2 fault code test.

Dec 05, 2016 | 2000 Lincoln LS

1 Answer

2000 nissan frontier, started missing engine light came on so we replaced plugs and wires and reset light runs better but still has a little miss... any other suggestions


misfire, has many cause, i have 50 reason list. for get that.
1: bad engine compression, or other major engine issues. mech.
2:bad spark
3: bad fueling. (too much or too little)

it only takes a few tests to find which it is, and in that order.
above assumes, 13.3 to 14.7v at the EFI system at all times running.
and EGR is not leaking.
what does engine light mean.
are you saying the CEL , check (service) engine light glows running? if yes ? why not scan it and report all DTC codes present. P0300 is random misfire. and P0301 is #1 cyl misfire.
as 2 examples.

Oct 08, 2013 | 2001 Nissan Frontier Crew Cab

1 Answer

Loss of power in acceleration


I would check the fuel pressure first.
If the engine was miss-firing the check engine light should be on.

Aug 08, 2012 | 2002 Dodge Durango

1 Answer

Cheak engine soon light keeps flashing


Is the car missing or not running quite right, have a little more wiggle to it? Flashing check engine light is usually indications of a cylinder misfiring which could be caused by a few different things.

Aug 05, 2010 | 2003 Mercury Mountaineer

1 Answer

Dodge 2500 it seems backfire and misses.


Some of the things that I would consider are a plugged PCV valve, a vacuum leak, a cracked distributor cap, or a faulty voltage regulator. I would also check the condition of the ignition coil. And even though the check engine light is not on, I would have the vehicle scanned to see if any fault code(s) are stored in the computer. (Never trust a light to not be out)Hope this helped and good luck.

Jul 20, 2009 | 2001 Dodge Ram 2500 Truck

1 Answer

Engine dies at random...Highway and idle.


do not think vacuum hose is teh issue. When ws last time you replaced fuel and air filter? Couls also be failing fuel pump, so need to check output pressure. If check engine light comes on may be in air polution control system. Need to pull code and see what circuit is causing the fault code. Sometimes an auto zone will read code for free.

May 03, 2009 | 2000 Jeep Cherokee

1 Answer

Service ing light on


hello mariojimenez, you could have 1 of several components causing the misfiring and check engine light to come on. I would recommend getting the computer scanned to find out what fault code you have. A fault code would be even more helpful to narrow down the root cause.

Mar 30, 2009 | 2001 BMW 3 Series

1 Answer

Check engine light stays on


Make sure the gas cap is there and is fully tightened (it will click), a loss or missing cap will turn the check eng light on.

Jul 28, 2008 | 1997 BMW 328

Not finding what you are looking for?
2001 Ford Taurus Logo

306 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...