Question about 2000 Oldsmobile Bravada

1 Answer

How to replace the #3 PLUG 2000 OLDS BRAVADA - 2000 Oldsmobile Bravada

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 31 Answers

Lets see thats the center plug on the drivers side of the engine. I dont have a Bravada handy to look but I am assuming that either the steering shaft is in the way. You should be able to take the drivers front wheel off and use a long exstension and reach through to the plug and remove it with no problem.

Posted on Apr 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to turn off auto head lights on 2000 olds bravada


There will be a nob or button for that in driver side .. most probably on the left hand side ( door hinge). There will be symbols for auto and manual head light operation.

Jan 04, 2015 | 2000 Oldsmobile Bravada

1 Answer

What engines are interchangeable with a 2000 bravada


Any 4.3L from a chevy blazer, gmc jimmy, olds bravada. years 1996-2005.

Oct 29, 2014 | Cars & Trucks

1 Answer

I have a 2000 olds bravada it starts but stalls right away?


hey sorry I commented on your other post and the link I wanted to share with u didn't show
www.diy-gm-security.com
http://www.diy-gm-security.com/ Do It Yourself GM Security bypass

Oct 20, 2014 | 2000 Oldsmobile Bravada

1 Answer

Im looking to fill the rear transbfer case on my 2000 Olds Bravada but I dont see a fill plug it has a vent tube


Should have a bolt with a 3/8 drive ratchet can fit in without a socket on it. It will just be a square indention

May 14, 2014 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

Where is the drain plug for the radiator on a 2000 olds bravada


It will be on the bottom of the radiator if it has one. If you do not find one simply remove the lower radiator hose to drain the antifreeze out.

Sep 14, 2011 | 2000 Oldsmobile Bravada

1 Answer

2000 Olds Bravada Key operates all electrics but will not turn ignition Could key be faulty


ignition switch has a anti-theft type lockout in the electronic switch inside steering column - have also had mine do this due to bad connection at the battery - remove both battery bolts and clean terminal and make sure you have a good connection - have also had my starter go out and does same thing - all lights and electronics but no start - had all 3 of these on my bravada in one week!!

Jun 01, 2010 | 2000 Oldsmobile Bravada

1 Answer

2000 OLDS BRAVADA FIRING ORDER DIAGRAM , WE CHANGED PRESSURE REGULATOR, NOW TRUCK FEELS AS IF ITS MISFIRING. WE ONLY REMOVED THE 3 SPARK PLUG WIRES ON THE RIGHT SIDE OF VEHICLE, IF LOOKING FROM THE FRONT.


For the Oldsmobile Bravada 4.3L V6:

Firing Order
:
1-6-5-4-3-2

Cylinders:
......(back)......
|..6..|.......|..5..|
|..4..|.......|..3..|
|..2..|.......|..1..|
......(front)

Distributor Connections:
...........(back)
Coil-> o
6-----> o.......o <-----5
4-----> o.......o <-----1
2-----> o.......o <-----3
...........(front)

Let me now if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Apr 25, 2010 | 2000 Oldsmobile Bravada

2 Answers

2000 olds bravada rear brakes are draging. changed brake hose's to calupers and the center hose as well. with new brake and rotors still draging not sure what to do next.


I also have this problem on my 2000 Bravada - replaced all rotors and back calipers, brand new brake pads, new system and my rear caliper STILL chewed up a brand new brake pad in one week down to the metal. Checking for an emergency brake issue at this point - if anyone has any suggestions about how to unhook the E Brake, please share!

Jan 13, 2010 | 2000 Oldsmobile Bravada

1 Answer

1998 OLDSMOBILE BRAVADA SPARK PLUG #3


you can remove it with a swivel plug socket

Oct 21, 2008 | 1998 Oldsmobile Bravada

Not finding what you are looking for?
2000 Oldsmobile Bravada Logo

Related Topics:

269 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...