Question about 1998 Chevrolet Lumina

2 Answers

Service engine soon light on, obd says egr valve

Service engine soon light on, code says egr valve insufficient flow, i replaced and reset, light came back on, is this a bad valve, a computer problem or somthing else?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 722 Answers

You should be fine. Usually what happens is when such a part causes the light to go on, the light will continue to come on again a few time after replacement of the part.

Simply disconnect the battery and let it sit for about 1minute (oat least 30 sec). Then reconnect the battery.

Drive the vehicle and if the light still comes one, take it to an auto parts dealer that can do a diagnostics test and ask them to clear the codes.

Even after this the light may come on - drive for about a week more and if it still stays on, then have the test done again and replace any other part that any codes may present faulty.

Otherwise, sometimes it itakes the computer and engine to adjust to the new part and get an accurate (consistant) reading until the light will stay off.

A lot of the time a light will come on if the O2 sensor(s) are bad. This isnt' a huge issue right aways, will slightly affect feul mileage and the amount of exhaust return into the engine for being reburned. Replace these if necessar (and if affordable).

Please let me know if you need any further assistance.

carsandcomps,

Guru, Premium Expert @ Fixya.com

Posted on Apr 28, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 957 Answers

You really need a scan-tool to look at live data and test components. If you replaced the EGR valve and you are still getting insufficient flow then the valve wasn't it.
What did it look like inside where the valve goes? What did the valve look like when you pulled it out?
The MAP sensor can affect the way the EGR works.

Posted on Apr 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you clear a blocked exhaust when code says insuffient emisions


egr valve bad,P0401 OBD-II Trouble Code Technical Description Insufficient EGR Flow What does that mean? EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor EGR (DPFE). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR. Symptoms You may notice drivability problems such as pinging (a.k.a. pre-ignition knock) when the engine is under load or the vehicle is at higher speeds. There may also be other symptoms. Causes A code P0401 most likely means one or more of the following has happened: The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced There is a blockage in the EGR (tube), most likely carbon buildup The EGR valve is faulty The EGR valve may not be opening due to a lack of vaccuum Possible Solutions In fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit. Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open Clean out the EGR valve and/or tubing to remove deposits Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model) Replace the DPFE sensor (with a good quality / OEM one) Replace the EGR valve Related EGR codes: P0400, P0402, P0403, P0404, P0405, P0406, P0407, P0408, P0409

Read more at: http://www.obd-codes.com/p0401
Copyright © OBD-Codes.com

May 31, 2015 | Cars & Trucks

1 Answer

Service engien soon light on a 1999 buick century code 401pd


If the DTC is P0401 it means that the EGR Valve is clogged or air flow is insufficient.Take EGR valve off and clean carbon out or replace EGR valve with a new one.

Oct 28, 2011 | 1999 Buick Century

2 Answers

Check engine light code P0401 98 Ford expedition


OBD-II Trouble Code P0401 - Insufficient EGR Flow

EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor EGR (DPFE). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR. You may notice drivability problems such as pinging (a.k.a. pre-ignition knock) when the engine is under load or the vehicle is at higher speeds. There may also be other symptoms.

A code P0401 most likely means one or more of the following has happened:
The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced
There is a blockage in the EGR (tube), most likely carbon buildup
The EGR valve is faulty
The EGR valve may not be opening due to a lack of vaccuum

Check it and keep us updated. Hope this helps (remember to rating this free answer).

Oct 13, 2011 | 1998 Ford Expedition

2 Answers

Fault code p0401


This error means Exhaust Gas Recirculation Flow Insufficient Detected.

You can deatils on the following site http://www.permoveo.ltd.uk/tabid/122/OBD-Error-Code/P0401/Diagnostics/Hyundai/Default.aspx

but for convenience I have reproduced that information here:
.
Generic OBD Error Code Details for P0401 Exhaust Gas Recirculation Flow Insufficient Detected What does this mean? OBD Code P0401refers to
EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor EGR (DPFE). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR. SymptomsPossible sumptoms of OBD code P0401
You may notice drivability problems such as pinging (a.k.a. pre-ignition knock) when the engine is under load or the vehicle is at higher speeds. There may also be other symptoms. CausesPossible causes of OBD code P0401
A code P0401 most likely means one or more of the following has happened: •The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced•There is a blockage in the EGR (tube), most likely carbon buildup •The EGR valve is faulty •The EGR valve may not be opening due to a lack of vaccuum Possible SolutionsIn fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit. •Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open •Clean out the EGR valve and/or tubing to remove deposits•Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model)•Replace the DPFE sensor (with a good quality / OEM one)•Replace the EGR valve Related CodesP0400 P0402 P0403

Jul 12, 2011 | Hyundai Tucson Cars & Trucks

2 Answers

Trouble code p0401


P0401 - Insufficient EGR Flow

EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor EGR (DPFE). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR.

Symptoms: You may notice drivability problems such as pinging (a.k.a. pre-ignition knock) when the engine is under load or the vehicle is at higher speeds. There may also be other symptoms.

Causes: A code P0401 most likely means one or more of the following has happened:
* The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced
* There is a blockage in the EGR (tube), most likely carbon buildup
* The EGR valve is faulty
* The EGR valve may not be opening due to a lack of vaccuum

Possible Solutions: In fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit.
* Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open
* Clean out the EGR valve and/or tubing to remove deposits
* Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model)
* Replace the DPFE sensor (with a good quality / OEM one)
* Replace the EGR valve


Hope this helps to solve it (remember to rate this answer).

Jan 06, 2011 | Ford F-250 Cars & Trucks

1 Answer

I got a code P040 on my 2003 corolla toyota corolla. My check engine light is on. so what does all this mean?


P0401 OBD-II Trouble Code
Insufficient EGR Flow

What does that mean?
EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor (DPF). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR.

Sep 19, 2010 | Toyota Corolla Cars & Trucks

2 Answers

What does a PO401 means for a 1998 Mercury Sable


P0401 OBD-II Trouble Code - Insufficient EGR Flow

What does that mean?
EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor EGR (DPFE). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR.

Symptoms
You may notice drivability problems such as pinging (a.k.a. pre-ignition knock) when the engine is under load or the vehicle is at higher speeds. There may also be other symptoms.

Causes
A code P0401 most likely means one or more of the following has happened:
* The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced
* There is a blockage in the EGR (tube), most likely carbon buildup
* The EGR valve is faulty
* The EGR valve may not be opening due to a lack of vaccuum

Possible Solutions
In fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit.
* Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open
* Clean out the EGR valve and/or tubing to remove deposits
* Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model)
* Replace the DPFE sensor (with a good quality / OEM one)
* Replace the EGR valve

Hope this help to solve it; remember comment and rated this help. TY for using Fixya.

May 06, 2010 | 1998 Mercury Sable

1 Answer

New egr valve installed. insufficient air flow.


EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor EGR (DPFE). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR.

Symptoms
You may notice drivability problems such as pinging (a.k.a. pre-ignition knock) when the engine is under load or the vehicle is at higher speeds. There may also be other symptoms.

Causes
A code P0401 most likely means one or more of the following has happened:
* The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced
* There is a blockage in the EGR (tube), most likely carbon buildup
* The EGR valve is faulty
* The EGR valve may not be opening due to a lack of vaccuum


For several solutions ans next steps, in fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit:
* Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open
* Clean out the EGR valve and/or tubing to remove deposits
* Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model)
* Replace the DPFE sensor (with a good quality / OEM one)
* Replace the EGR valve

Hope this helped (remember comment and rated this).

May 05, 2010 | 1999 Buick Regal

2 Answers

Just changed plugs running well 1 day later service engine soon light appears. Took to parts house code P0401 is what shows cleared code not returned yet


Technical Description

Insufficient EGR Flow

What does that mean?

EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor EGR (DPFE). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR.


You may notice drivability problems such as pinging (a.k.a. pre-ignition knock) when the engine is under load or the vehicle is at higher speeds. There may also be other symptoms.
Causes

A code P0401 most likely means one or more of the following has happened:

* The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced
* There is a blockage in the EGR (tube), most likely carbon buildup
* The EGR valve is faulty
* The EGR valve may not be opening due to a lack of vaccuum

Possible Solutions

In fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit.

* Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open
* Clean out the EGR valve and/or tubing to remove deposits
* Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model)
* Replace the DPFE sensor (with a good quality / OEM one)
* Replace the EGR valve

Jan 13, 2010 | 2002 Ford Expedition

Not finding what you are looking for?
1998 Chevrolet Lumina Logo

330 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...