Question about 2000 Isuzu Trooper

1 Answer

2000 isuzu trooper: OBD-II Trouble Code: P0401 Insufficient EGR F

2000 isuzu trooper,
Have a new EGR, Catalyc Converter, driver side oxygen sensor - but still getting OBD-II Trouble Code: P0401 Insufficient EGR Flow

Posted by on

  • egoz72 May 11, 2010

    Thanks redbeard00,

    What I did is added seafoam through pcv valve vacuum line, about 1/2 a can and the rest to gas tank. Did not have to disconnect battery to clear the codes after seafoaming. The code P0401 disappeared after about 2 days.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 957 Answers

Your SUV is really giving you a hard time, lol. Sorry but I've had those days too.
I would try to check if you have blocked EGR passages. If ok check for restricted MAP sensor vacuum hose/passage or restricted exhaust. I know you replaced the CAT but if the muffler is blocked then there would still be a restriction. Also check the wiring and connection to the MAP sensor.

Posted on Apr 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you clear a blocked exhaust when code says insuffient emisions


egr valve bad,P0401 OBD-II Trouble Code Technical Description Insufficient EGR Flow What does that mean? EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor EGR (DPFE). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR. Symptoms You may notice drivability problems such as pinging (a.k.a. pre-ignition knock) when the engine is under load or the vehicle is at higher speeds. There may also be other symptoms. Causes A code P0401 most likely means one or more of the following has happened: The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced There is a blockage in the EGR (tube), most likely carbon buildup The EGR valve is faulty The EGR valve may not be opening due to a lack of vaccuum Possible Solutions In fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit. Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open Clean out the EGR valve and/or tubing to remove deposits Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model) Replace the DPFE sensor (with a good quality / OEM one) Replace the EGR valve Related EGR codes: P0400, P0402, P0403, P0404, P0405, P0406, P0407, P0408, P0409

Read more at: http://www.obd-codes.com/p0401
Copyright © OBD-Codes.com

May 31, 2015 | Cars & Trucks

2 Answers

How do I correct a P0401 code on my 2.2 chevy corsica


The passages are plugged ! pull EGR valve an inspect passages and the pipe for a restriction or damage and repair as necessary.

May 30, 2015 | Chevrolet Corsica Cars & Trucks

1 Answer

What are codes p0401 and p0300 mean on a 2000 isuzu trooper


P0401 is EGR problem
P0300 is a cylinder 3 misfire.
Replace EGR valve and do a full tune-up.

Mar 19, 2014 | 2000 Isuzu Trooper

2 Answers

'01 Honda Accord, EX-L, V6, Code P0401 comes up at Auto Zone Is this a DIY job? Fairly handy


code P0401 is an EGR code.
which is insufficient EGR (exhaust gas recirculation) flow.it is quite common for people to just replace the EGR valve.



You can try doing it your self.:----
To troubleshoot these issue and solve it yourself.I suggest you to go through few help links related to
OBD code P0401:-----
Click the link below:-----


1997 Chrysler Sebring: OBD Error Code P0401?

http://howtobyme.blogspot.in/2012/06/1997-chrysler-sebring-obd-error-code.html

----------

2004 Hummer H2: OBD Code P0141?

http://whoisbyme.blogspot.in/2012/06/2004-hummer-h2-obd-code-p0141.html

-----------

DTC Trouble Code P0401?

http://schematicsdiagram.blogspot.com/2012/01/dtc-trouble-code-p0401.html

-----------
These will help.
Thanks.

Nov 28, 2012 | Honda Accord Cars & Trucks

1 Answer

P0174 p0402 p1150 p1151 and p0401


Hi there:



P0401 OBD-II Trouble Code - Insufficient EGR Flow
EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor EGR (DPFE). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR.


Symptoms: You may notice drivability problems such as pinging (a.k.a. pre-ignition knock) when the engine is under load or the vehicle is at higher speeds. There may also be other symptoms.


A code P0401 most likely means one or more of the following has happened:
The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced
There is a blockage in the EGR (tube), most likely carbon buildup
The EGR valve is faulty
The EGR valve may not be opening due to a lack of vaccuum


Possible Solutions: in fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit.


Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open
Clean out the EGR valve and/or tubing to remove deposits
Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model)
Replace the DPFE sensor (with a good quality / OEM one)
Replace the EGR valve




P0402 OBD-II Trouble Code - Exhaust Gas Recirculation Flow (EGR) Excessive Detected
EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor (DPF). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0402 code means that OBD detected an excessive amount of EGR.


Symptoms: You may notice drivability problems such as the engine may surge off idle. There may also be other symptoms.


A code P0402 most likely means one or more of the following has happened:
The DPFE (differential pressure) sensor is faulty and needs to be replaced
There is a blockage in the EGR (most likely carbon buildup)
The EGR valve is faulty
The EGR valve may not be opening due to a lack of vaccuum


Possible Solutions: with a P0402, it is common for people to replace the EGR valve, only to have the problem return. The most likely solution is to replace the DPFE sensor.


Check the voltage at the DPFE sensor both at idle and when the EGR is open
Replace the DPFE sensor

P1150 OBD-II Trouble Code - Air/Fuel Sensor Circuit Range/Performance (Bank 1 Sensor 2)


P1151 OBD-II Trouble Code - Lack of Upstream Heated Oxygen Sensor Switch - Sensor Indicates Lean - Bank No. 2
upstream is considered the oxygen sensor for the right side exhaust manifold, before the catalytic convertor. Make sure the sensor's electrical connection is in good condition. On the sensor, test between the terminals with an multimeter/ohmmeter. You should see about 6 ohms at 68*F. If not, replace.

The reason your engine is doing that is because the sensor is failing in such a way that the computer is dumping in extra fuel when it isn't really needed. Then you get the black smoke.





Hope this helps.

Jun 08, 2012 | Cars & Trucks

2 Answers

Check engine light code P0401 98 Ford expedition


OBD-II Trouble Code P0401 - Insufficient EGR Flow

EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor EGR (DPFE). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR. You may notice drivability problems such as pinging (a.k.a. pre-ignition knock) when the engine is under load or the vehicle is at higher speeds. There may also be other symptoms.

A code P0401 most likely means one or more of the following has happened:
The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced
There is a blockage in the EGR (tube), most likely carbon buildup
The EGR valve is faulty
The EGR valve may not be opening due to a lack of vaccuum

Check it and keep us updated. Hope this helps (remember to rating this free answer).

Oct 13, 2011 | 1998 Ford Expedition

2 Answers

Fault code p0401


This error means Exhaust Gas Recirculation Flow Insufficient Detected.

You can deatils on the following site http://www.permoveo.ltd.uk/tabid/122/OBD-Error-Code/P0401/Diagnostics/Hyundai/Default.aspx

but for convenience I have reproduced that information here:
.
Generic OBD Error Code Details for P0401 Exhaust Gas Recirculation Flow Insufficient Detected What does this mean? OBD Code P0401refers to
EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor EGR (DPFE). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR. SymptomsPossible sumptoms of OBD code P0401
You may notice drivability problems such as pinging (a.k.a. pre-ignition knock) when the engine is under load or the vehicle is at higher speeds. There may also be other symptoms. CausesPossible causes of OBD code P0401
A code P0401 most likely means one or more of the following has happened: •The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced•There is a blockage in the EGR (tube), most likely carbon buildup •The EGR valve is faulty •The EGR valve may not be opening due to a lack of vaccuum Possible SolutionsIn fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit. •Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open •Clean out the EGR valve and/or tubing to remove deposits•Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model)•Replace the DPFE sensor (with a good quality / OEM one)•Replace the EGR valve Related CodesP0400 P0402 P0403

Jul 12, 2011 | Hyundai Tucson Cars & Trucks

1 Answer

I got a code P040 on my 2003 corolla toyota corolla. My check engine light is on. so what does all this mean?


P0401 OBD-II Trouble Code
Insufficient EGR Flow

What does that mean?
EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor (DPF). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR.

Sep 19, 2010 | Toyota Corolla Cars & Trucks

1 Answer

What's wrong with the code P0401 for camry 96


P0401 OBD-II Trouble Code
Insufficient EGR Flow
What does that mean?
EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor (DPF). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR.

May 06, 2010 | 1996 Toyota Camry

1 Answer

P401 code?


P0401 OBD-II Trouble Code - Insufficient EGR Flow

What does that mean?
EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor EGR (DPFE). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR.


Symptoms
You may notice drivability problems such as pinging (a.k.a. pre-ignition knock) when the engine is under load or the vehicle is at higher speeds. There may also be other symptoms.


Causes
A code P0401 most likely means one or more of the following has happened:
* The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced
* There is a blockage in the EGR (tube), most likely carbon buildup
* The EGR valve is faulty
* The EGR valve may not be opening due to a lack of vaccuum


Possible Solutions
In fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit.
* Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open
* Clean out the EGR valve and/or tubing to remove deposits
* Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model)
* Replace the DPFE sensor (with a good quality / OEM one)
* Replace the EGR valve


Hope this helped (remember comment and rated this).

May 05, 2010 | 2002 Honda Passport

Not finding what you are looking for?
2000 Isuzu Trooper Logo

1,779 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...