Question about 1984 Chevrolet Camaro

1 Answer

Need to know how to instal the horn contact and spring into a 1984 camaro steering colum

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 31 Answers

First you need toremove the steering wheel. You will also need a lock ring removal tool. This tool will help you remove the circlip from behind plastic cover. Dont lose this clip.After you have removed the lock plate then the horn ring should be visible and you can replace it.

Posted on Apr 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace a clock spring


Is air bag light on ? First test horn for power & with power.if there's power going to horn change horn if non when horn pushed chance clock spring ? Have any one done any steering repairs they might not of re-centered rack to colum .

Dec 23, 2013 | 2002 Kia Rio

1 Answer

Where is the fuse for the horn on a 1992 chevy camaro


I have a 92 chevy camaro Rs. My horn on steering colum don't work. They ran wires from battery and put a horn button next to driver left side of steering wheel in 2015. My question is where is Horn relay located so i can check that and fuse first before letting someone open up steering wheel for connection. I am a Female trying to do this. My husband has no patience for this stuff. And always ends up with xtra parts after... SOS

Mar 15, 2013 | 1992 Chevrolet Camaro

1 Answer

How to install clock spring


Not recomended for untrained people as airbags can be very dangerous. That said you need to. 1) disconect battry 2) remove SRS (Airbag fuse) 3) remove shroud around steering colum 4) wait ten minutes. 5) remove horn pad (airbag houseing) usualy held in by tamper proof bits from back of steering wheel. 6) unplug wires to airbag & horn 7) undo steering wheel bolt & mark position of steering wheel to colum splines. 8) remove steering wheel with suitable puller (NOT a hammer) 9) unclip clock spring & replace 10) reverse procedure

Sep 22, 2012 | Cars & Trucks

1 Answer

The horn doesn't work


ckthe fuse and if thats not it ck the wires going to horn and then last it may be a bad horn or its in the steering colum pull the padded area on steering wheel and ck the wire and spring

Feb 26, 2011 | 1993 Ford Aerostar Extended

1 Answer

1984 camero horn does notwork


check fuse -horn -good than horn switch in steering column bad wire or switch it self

Oct 14, 2009 | 1984 Chevrolet Camaro

1 Answer

My horn doesnt work


Sounds like you either havnt plugged in the clock spring connector or you have damaged it,

Your best checking these connectors located top of the steering colum and the clock spring is is what you plug the wires into


Aug 28, 2009 | 1991 Lincoln Town Car

1 Answer

I took of my steering column in my 3rd gen camaro and need to istall,but i cant seem to connect it to the linkage under the hood.Is there a trick to it?


Yes there is a trick,,There is a spline that has to be lined up before sliding it to the steering sector. Most likely a flat spot.Look for the flat spot on the sector input shaft,and look on the steering colum end and align them up,Jigle and turn back and forth gently,not to much,and apply a little pressure,it should go on .Be sure the pinch bolt is out.roniecon@gmail.com

Jul 22, 2009 | 1984 Chevrolet Camaro

1 Answer

Horn on 1984 camaro is not working correctly.


it turns on on certain position of the steering wheel? if yes, then the problem is clock spring under the horn pad. you need to change it if it is electronics.

Apr 26, 2009 | 1984 Chevrolet Camaro

2 Answers

I own a Chevrolet lumina two door year 1990.Why would I get smoke coming out of the steering column? Where you push to get the horn to operate it gets very warm. seems i had this trouble before but...


One problem I have had with smoke coming from the steering column is from the turn signal switch. The contacts get worn and for some reason it smokes and also gets hot!!!
Replace the turn signal switch and this should fix the problem.

Jul 17, 2008 | 1984 Chevrolet Camaro

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

166 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...