Question about 2000 Buick LeSabre
The fuel pump for your Buick is mounted inside the fuel tank.
It is electrically powered through a relay that is activated by the cars engine control computer.
Hope this helps you.
Posted on Apr 27, 2010
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You should be able to replace the fuel pump through the trunk. Beneath the carpet in the trunk should be an access panel. Once you remove that panel, all the electrical connections and fuel lines can be disconnected. Remember to disconnect the negative battery cable prior to service, and to take necessary precautions in regards to fuel spillage that may occur. I hope this helps.
Posted on Dec 02, 2008
look on the firewall in the middle area been a while since i worked on one of those vehicles , relay rail shoud be behind the engine
Posted on Dec 17, 2008
first disconnect the battery then check how the serpentine belt is lined up so u can take it off and put back on. Then the pump should be on the side of the motor with 9or12 bolts there could be more! after taking out take razorblad and skrap the old gasket clean wipe of then put new gasket and pump back on dont over tighten the screws cuase the pump my be aluminum.
Posted on Mar 19, 2009
Yes, it is usually 25 amp (Yellow). There is also, a relay for the pump. Most of the fuses are under the dash...you can check your owners manual to see exactly where the fuse panel is located. The relays are under the hood. If the relay is working properly, you will feel a clicking motion while letting someone else turn the ignition on, but don't attempt to turn it to start the engine since this will cover the noise that you are listening for. If you need to know which relay is for the fuel pump, you can ask at the Auto store. They should be able to help. If the relay isn't clicking, you can tap it lightly with a screwdriver handle to get it to work; however, if the pump isn't running and is original; it is most likely bad and some test needs to be done to confirm that before taking the pump out.
Posted on Jan 25, 2010
Tips for a great answer:
May 06, 2016 | Buick Cars & Trucks
Jan 27, 2011 | 2000 Buick LeSabre
Oct 25, 2010 | 2000 Buick LeSabre
Apr 19, 2010 | 2000 Buick LeSabre
Mar 15, 2010 | 2000 Buick LeSabre
Oct 05, 2009 | 2000 Buick LeSabre
Jun 27, 2009 | 2000 Buick LeSabre
Jun 06, 2009 | 2000 Buick LeSabre
May 23, 2009 | 1999 Buick LeSabre
Oct 21, 2008 | 2000 Buick LeSabre
675 people viewed this question
Usually answered in minutes!