Question about 2000 Chrysler Cirrus

1 Answer

In a standard garage charging for parts and labor, what would be an estimated cost to change the spark plugs?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 921 Answers

Well i believe you have a v-6 transverse.. three plugs will be very easy to get to.. but the three in the back may take a little while longer..this job should not take more than an hour unless they have to take lines or other components out if the way.. if they do.. it might take a little longer...most shops charge anywhere from $50 to $75 an hour. as far as plugs go stick to the stock plugs ..i always use NGK and have never had a problem with them. i believe they run about $6 to $10 a piece, Im not quite sure about the would depend on what they offer you..just ask for a good stock replacement..i haven't tried the iridium style yet, but they"re a little more expensive. So at about $65 hour labor, and $50 plugs = $115. you might have to wait at the shop awhile until the engine cools down a bit...the spark plugs should never be changed on a hot engine you can cause damage to the heads.

Posted on Apr 27, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How much does it cost to have spark plugs and wires put in acura 2.3cl 2002

Well, now.
Spark plugs generally run from 3 - 10 dollars each, and spark plug wires run from 30 - 130 a set.
Now I'll do some estimating:
If you have a V-6 motor, that is 6 X 6 = $ 36 plugs and $100 wires = $136 + tax.
However, garages and shops get labor from $ 30-100 dollars to do this.
So, $ 136 parts plus $ 70 labor = $ 206 + tax.
Next thing to remember:
1) Spark Plugs today are good for 100,000 miles a set.
2) Spark plug wires can easily last 10 years.
3) and most important is - tune -up shops are in business to sell you plugs and wires whether you need them or not. They HAVE to sell them to stay in business.

Jan 10, 2013 | Cars & Trucks

1 Answer

How much would it take to fix/change out the freeze plug in a 1994 Ford Crown Victoria? I believe that is what is wrong with the car I have now. I know I have to remove the engine from the bell housing?...

The book rate for the freeze plugs is 0.5hrs labor for the 1st & 0.04hrs for each additional. That does not include the time needed to gain access to them. I'd estimate you're looking at around 5hrs minimum for access time.

I wouldn't be able to give you a "cost" estimate as I don't know what the garage would charge you labor rate wise. I know dealerships are up over $100us an hour.

Apr 05, 2011 | 1994 Ford Crown Victoria

2 Answers

What's the cost to repair intake manfold gasket on 2006 gmc box truck 6.0 engine ? 16 ft not sure of model

the gasket set is $50 or less depending on model type, now depend where you seek to have the repair done reflects the charge. dealerships rape you, and if you can live with that then take it to them, I do not go to a dealership unless i need a special clip or snap, never will i buy a vehicle or have service done by one. I refuse giving free money to companies that rape you for their product in the first place. I would tackle that yourself, or go to a reputable garage that gives a flat rate.
I personally would charge you $ 175.00 . Double that or triple that at dealer. Great day for a grease monkey!!!!!

Jan 15, 2011 | GMC G3500 Cars & Trucks

1 Answer

2 spark plugs labor and parts cost

I would change all 4 spark plugs if you gonna change just 2 no added cost , labor i would say no more then 1 hour, parts different costs in different parts of the country try your local parts store , MAKE SURE though you get bosch plugs back in this car.

Aug 27, 2010 | 1991 Mercedes-Benz 190

3 Answers

Labor cost to repair spark plugs on 2002 Mazda

It is what it is. If it was easy, you would do it yourself. That a avg price for that job. Be sure they use the correct NGK Platinum spark plug.

May 14, 2010 | 2003 Mazda MPV

3 Answers

Our mechanic says our starter is out in our 94 850

too much! check with advance auto parts and ask some gargage how much would they charge you just to put it on

Feb 27, 2010 | 1994 Volvo 850

1 Answer

1) Apx. how much would it cost parts & labor to change Ignition switch on a 1998 Nissan Maxima SE? 2) Do you think I can find the parts?

HI, the cost of the ignition switch is $27.99. the labor cost is usually figure by the hour and it is set a 50 dollar an hour increment. In my shop, we have a set minimum labor charge of two hour as most shops in my area. Total estimated cost including the labor and parts should be around $127.99 give or take.

You can most certainly purchase this part yourself on-line at

Part Number is - LS812
OEM Number---- 48750- 1E411

Please rate and god bless:)

May 07, 2009 | 1997 Nissan Maxima

1 Answer

I have a 1999 blazer. It was making a roaring noise in the front end. Took it to a garage. They replaced the passenger side wheel bearings. This cost around $400.00 for parts and Labor. When I picked the...

Ask them why it wasn't a problem before the work that they did in that area, and if it normally needs replacement because of bearing work done, then why wasn't it done, and why should you pay the labor to pull everything apart again? Call your local parts store or dealer for price on part, so you know what they're charging you for labor. If it's 2 wheel drive, ( gives an estimate of about $75-$100 for labor & $50-$75 for parts.? Something not right here! Have you dealt with these guys before?

Mar 07, 2009 | 2000 Chevrolet Blazer

2 Answers

Need approximate labor cost for relacement of a 4.6L Ford Expedti

it depends on who you take it to it could cost as little as 1500 up to 3000

Feb 16, 2009 | 2001 Ford Expedition

Not finding what you are looking for?
2000 Chrysler Cirrus Logo

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8547 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides