Question about 1999 Chevrolet Silverado 1500

2 Answers

Whats the stereo code in my chevy silverado 1999

Posted by on

  • yadayada
    yadayada May 11, 2010

    you must contact the dealer for help in getting your unique code

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Easy go to ebay and look for AC Delco GM Radio Unlock Code TheftLock Chevy just pay $ 5.00 for the action and this guy send your code in about 2hrs. jut follow the instructions good luck!!!

Posted on May 29, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 84 Answers

Vehcile stereo codes are different for every radio to deter theft. The codes are usually around 4 numbers. There are a couple ways to find out what your code is. First, check your owners manual, someone at some point may have written it down in there. Also, there may be a card somewhere in you paperwork that has the code. If you don't find the code, the easiest way to find out what it is, go to you local GM dealerships service department, if you give them you VIN number they will be able to give you the code (most of the time free of charge). My last suggestion, pull the radio out, sometimes it will be written on the unit.

Posted on Apr 27, 2010

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Jim1969pa3
  • 152 Answers

SOURCE: I have a 1999 chevy silverado and I need to change heater core

Not a whole lot different. Just need to keep removing plastic down at the heater until you get to the heater core. Then disconnect it on the firewall side.

Posted on Dec 22, 2009

Molson02536
  • 3854 Answers

SOURCE: 1999 1500 Chevy Silverado - microchip for anti-theft?

Document ID# 803013
1999 Chevrolet Chevy K Silverado - 4WD

Security Lamp Illuminated on the IP, Engine Stalls, No Start, DTC B2960 (Security System Sensor Data Incorrect but Valid) Set (Inspect and Repair Cause of DTC B2960)
1999-2001 Chevrolet and GMC C/K Pickup and Utility Models (Silverado, Sierra, Tahoe, Suburban, Yukon, Yukon XL)

This bulletin is being revised to add information on inspecting for electrical intermittent conditions and important connector C201 tightening steps. Please discard Corporate Bulletin Number 01-08-56-002 (Section 08 -- Body and Accessories).

Condition
Some customers may comment on the following conditions. These symptoms may be intermittent.

• Security lamp illuminates while driving. The Security lamp may be On or Off when the customer brings the vehicle to the service facility.

• The engine cranks but will not start and the Security lamp is flashing.

• The engine starts then stalls and the Security lamp is flashing.

Cause
Condition(s) may be due to an incorrect Passlock™ sensor voltage received by the body control module (BCM) from the Passlock™ sensor due to the following conditions. Most intermittent conditions are caused by faulty electrical connections or wiring.

• A 7 ohm variation in the sensor ground circuit wiring, circuit 1057

• A 100 ohm variation in the Passlock™ sensor signal wiring circuit, circuit 1836

Inspect for the following items:

• Broken wiring inside the insulation.

• A poor connection between the male and female terminal at the connector. Refer to Testing for Proper Terminal Contact under Testing for Intermittent and Poor Connections in Wiring Systems for the specific procedure.

• A poor terminal to wire connection. Some conditions that fall under this description include poor crimps, poor solder joints, crimping over the wire insulation instead of the wire itself, and corrosion in the wire to terminal contact area.

• Wire insulation that is rubbed through. This causes an intermittent short as the bare area touches other wiring or parts of the vehicle.

• A poor connection between the male and female terminal at a connector. This poor connection may be the result of contamination or deformation.

- Contamination may be caused by the connector halves being improperly connected. A missing or damaged connector seal, damage to the connector itself, or exposing the terminals to moisture and dirt can also cause contamination. Contamination, usually in the underhood or underbody connectors, leads to terminal corrosion, causing an open circuit or intermittently open circuit.

• Separate the connector halves.

• Visually inspect the connector halves for contamination. Contamination may result in a white or green build-up within the connector body or between terminals. This causes high terminal resistance, intermittent contact, or an open circuit. An underhood or underbody connector that shows signs of contamination should be replaced in its entirety including the terminals, the seals, and the connector body.

- Deformation is caused by probing the mating side of a connector terminal without the proper adapter, improperly joining the connector halves, or repeatedly separating and joining the connector halves. Deformation, usually to the female terminal connector tang, can result in poor terminal contact causing an open or intermittently open circuit. Using an equivalent male terminal from the J 38125-B, test that the retention force is significantly different between an good terminal and a suspect terminal. Replace the female terminal in question.

Correction
Have any of the following components had service recently?

• The BCM

• The ignition lock cylinder case assembly

• The PCM/VCM

If any of the above components have been replaced, the Programming Theft Deterrent System Components procedure must be performed before any diagnostic procedures are performed.

To assist in diagnosis, the following steps are provided.

Does the engine start? If not, use the Engine Cranks but Does Not Run diagnostic information in the Engine Controls sub-section of the applicable Service Manual.
Important:

• The Security telltale on the message center is controlled by the vehicle theft deterrent (VTD) system and the content theft deterrent (CTD) system. The Security telltale is controlled by the BCM through the Class 2 data line.

• The VTD system portion of the BCM controls the Security telltale when the ignition switch is in the On position. The VTD system uses the Security telltale as a malfunction indicator.

• The CTD system portion of the BCM controls the Security telltale when the ignition switch is in the Off position. The CTD system uses the Security telltale to identify system status.


Observe the Security indicator lamp in the instrument panel.
Remove the key from the lock cylinder.
- Security indicator should be Flashing when the door is open.

- Security indicator should be Off when all the doors are closed.

- If the Security indicator does not come On or go Off correctly, refer to the Content Theft Deterrent System diagnostic and repair information in the applicable Service Manual.

With the Doors closed, place the key in the lock cylinder and turn to the Run position. Observe the Security indicator lamp.
- Lamp is On and does not go Off however, the engine starts. This indicates that the VTD system detected a fault when the engine was running.

- Lamp flashes On and Off. This indicates a problem has been detected by the VTD (Passlock™) system and the engine may not start this key cycle, a current condition.

Important: You must diagnose the diagnostic trouble codes (DTCs) in the order specified in the DTC table shown below. Failure to do so may result in one or more of the following conditions:


• Extended diagnostic time

• Incorrect diagnosis

• Incorrect parts replacement


DTC
Diagnostic Procedure
Module

Important: Before you use this table, diagnose P0601, P0602, P0604, and P0606. Refer to Diagnostic System Check - Theft Deterrent.

PXXXX Other PCM DTCs

Refer to the following procedures:

• Diagnostic System Check - Engine Controls in Engine Controls - 4.3L

• Diagnostic System Check - Engine Controls in Engine Controls - 4.8L, 5.3L, 6.0

• DTC P0192 in Engine Controls - 6.6L

• Diagnostic System Check - Engine Controls in Engine Controls - 8.1L


If none of the above items are true, proceed with the following steps:

Install seat covers.
Connect the scan tool to the diagnostic link connector (DLC).
Enter scan tool diagnostics.
Select the model year of the vehicle.
Select light truck.
Select F1, (Body).
Select "C" or "K" for Series.
Select F0, Body Control Module.
Select F0, (Diagnostic Trouble Codes (DTC)).
Select F0, (DTC information).
Select F0, (Current DTC).
Record on the repair order any current DTCs displayed. If none, skip the next step.
Is a current B2960 DTC displayed? If no, the condition is not present with this key cycle. Continue to the next step.
Select Exit.
Select F1, (History DTC).
Are any history DTCs other than B2960 present? If so, diagnose those DTCs first using the appropriate service information, otherwise continue.
Select Exit.
Select Exit.
Select F1, Data Display.
Select F6, Security.
Cycle the key to the OFF position and wait 20 seconds.
Slowly turn the key to the RUN position. Be careful not to turn the key into the START position.
Observe the following values:
- Passlock™ Data Voltage should be 5.0 volts.

- Passlock™ State should be Normal.

- Passlock™ Code should be Open.

Rotate the key to the START position, and observe the following again:
- Passlock™ Data Voltage should be less than 5.0 volts. Passlock™ Data Voltage should remain steady and not fluctuate. The test vehicle used for this diagnostic procedure had a voltage value of 2.49 volts. The vehicle being worked on may be either higher or lower than this value. The key is that it has to be less than 5.0 volts.

- Passlock™ State should be "Monitor Passlock™".

- Passlock™ Code should be Valid Code.

If no trouble is found and the customer has experienced one of the symptoms or the code is a history DTC, the most likely cause is the VTD (Passlock™) wiring, specifically the wires from the VTD (Passlock™) sensor to the BCM.

Posted on May 14, 2010

  • 396 Answers

SOURCE: 1999 chevy silverado service 4 wheel drive light

I had a similar problem with the Service 4 Wheel Drive light which came on intermittently then became more consistent in the message center display. It would go into 4 wheel drive if the message center did not display the Service 4 Wheel Drive message in the message center, but not when the message was displayed. I found the transfer case switch module in the dash was defective, and it has been working with no other problems for three years.

Posted on Jul 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 chevy silverado with p1345,p0171,andp0174


Did you verify the sensors were faulty before you replaced them ? Code 1345 means the signal from each sensor is not in sync with the other. That means one sensor signal is out of sync, or there is a problem with the timing chain.
Codes 171 and 174 deal with the issue of the fuel system being too lean on both banks or heads. You could have compression or fuel problems that would cause those codes.
A mechanic would use a scanner to monitor data from the sensors and try to figure out whats going on.

Feb 19, 2014 | Cars & Trucks

2 Answers

Stereo


It can be wiring issue.The stereo wiring has to be inspected.


For more help on car radio problems, I suggest you to go through these troubleshooting links, these will help you: -----

Click the link below: ---

-----

Cigarette lighter, Remote central locking, and Radio stopped working

http://whoisbyme.blogspot.in/2012/07/cigarette-lighter-remote-central.html

-------

VW passat radio off safe mode? VW radio CODE?

http://schematicsdiagram.blogspot.in/2012/03/vw-passat-radio-off-safe-mode-vw-radio.html

-------------

How to wire new Radio on 1990 Toyota Celica?

http://schematicsdiagram.blogspot.com/2011/12/how-to-wire-new-radio-on-1990-toyota.html

--------------

Radio Stereo Wiring Diagram for 1991 Chevy 1500?

http://schematicsdiagram.blogspot.com/2011/12/radio-stereo-wiring-diagram-for-1991.html

------------------

How to remove radio on Acura Car models?

http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-radio-on-acura-car-models.html

---------------

Where is Radio Fuse located on 2007 Dodge charger?

http://schematicsdiagram.blogspot.com/2011/12/where-is-radio-fuse-located-on-2007.html

-------------

How to reset Radio code after car battery is died?

http://howtobyme.blogspot.com/2011/12/how-to-reset-radio-code-after-car.html

-------------

Can car radio code block Passkey anti theft system ?

http://schematicsdiagram.blogspot.com/2011/12/can-car-radio-code-block-passkey-anti.html


----------

After Market Stereo wiring for 1999 Chevrolet Silverado 1500?

http://schematicsdiagram.blogspot.com/2011/12/after-market-stereo-wiring-for-1999.html

---------

Chevy car radio doesn't allow to switch to the XM Band to get the radio ID?

http://schematicsdiagram.blogspot.com/2012/01/chevy-car-radio-doesnt-allow-to-switch.html

-------

No power to radio on 2005 Toyota Scion Xb?

http://repairhelpcenter.blogspot.com/2012/01/no-power-to-radio-on-2005-toyota-scion.html

---------

Lexus rx330 Radio has power but no sound?

http://repairhelpcenter.blogspot.com/2012/01/lexus-rx330-radio-has-power-but-no.html

-------

Radio goes ON and OFF while driving?

http://technoanswers.blogspot.com/2012/01/radio-goes-on-and-off-while-driving.html

------

Lincoln Town Car Radio stereo wiring?

http://technoanswers.blogspot.in/2012/02/lincoln-town-car-radio-stereo-wiring.html

------

Radio wiring diagram for 1997 Lincoln Town Car?

http://technoanswers.blogspot.in/2012/02/radio-wiring-diagram-for-1997-lincoln.html

----

How to remove cd player from dash on 2003 Lincoln Aviator

http://technoanswers.blogspot.in/2012/01/how-to-remove-cd-player-from-dash-on.html

----------

These details will help you thanks.

Dec 07, 2012 | 2009 Chevrolet Cobalt

1 Answer

I need a wiring diagram for a 1989 chevy silverado 1500 2 door (for replacing the stereo)


When I replace a stereo, I buy the harness which is available on Ebay.com or places like Best Buy. All of the wires are labeled and color coded which makes it easier to connect with the wire nuts to any aftermarket stereo that fits in your dash.

Aug 03, 2010 | 1989 Chevrolet Silverado 2500

1 Answer

Code o300 checked about everything you can possiblly do and lite still comes on, any idea's 1999 chevy silverado four wheel drive, 5.3 motor auto trans.


Code p0300 is for mutiple missfires. Have you checked fuel pressure, fuel pressure regulator, plugs, wires, fuel filter... Those would be the main cause of Mutiple missfires.

Jun 06, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

1999 chevy silverado seveice engine soon how to recet light


must have a scanner to reset light but it will come back on until you fix the problem have the system checked to get trouble code that will let you know where to start

Feb 17, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

How do i unlock my 2004 chevy silverado Stereo


You need to get the code from a GM dealer,code prevents stolen radio to be used. They will give you code.

Feb 03, 2010 | 2004 Chevrolet Silverado

1 Answer

Changing battery in 1999 chevy malibu


security will no be affected but if you don what to do things like re-set the clock or the car has a stereo with a code and you dont have the code anymore its better if you use a sigarret plug with a 9 volt battery they're sold at any automovile store specifically to maintain settings. hope this helps
you.

Dec 24, 2009 | 1999 Chevrolet Malibu

2 Answers

Chevy truck running rough 150,000 miles


Find out why the engine light is coming on, it is the info u probably need to fix the running rough problem. Most auto parts stores will read the codes stored in your trucks computer for free, write them down, and ask what they mean and how to correct the problem. If u need more info, return to this site w/ codes for further help.

Dec 30, 2008 | 1999 Chevrolet Silverado 1500

Not finding what you are looking for?
1999 Chevrolet Silverado 1500 Logo

627 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...