Question about 2005 Hyundai Accent

1 Answer

My hyundai getz car has loss of transmission clutch okay gears okay no drive when accalerator is used could it be the cam belt which has just been changed thankyou

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 289 Answers

It could be one of the cv joints broken

Posted on Apr 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi I want to know if i bleed my new clutch will the shudder on first gear go away on my hyundai getz they say must give new clutch time to settle in


No, bleeding your clutch wont' help clutch judder. Neither will giving it time to settle in. That's a "go away and get used to the problem" answer. Likely the result of using cheap after-market parts.

Dec 14, 2015 | Hyundai Cars & Trucks

2 Answers

2003 Getz. How do I bleed clutch?


If there isn't a bleed valve on the slave(at the transmission). then you have to pump it up with the pedal. Watch the fluid level. With the bleed valve, pump the pedal and hold it down, release the valve and close it. Keep doing this until fluid only comes out(no air). Again watch the fluid level.

Dec 13, 2015 | Hyundai Cars & Trucks

1 Answer

Engine light appears in car after timing belt replaced


engine lights also look after the transmission so check all wire connections and vacuum hose to the gear box.

Mar 09, 2015 | 2011 Hyundai Getz 1.1

1 Answer

Daughters 2002 Hyundai Getz is stuck in what i think is second gear.


Worn Clutch plate or thrust plate.

Check if hydraulic Clutch
if so check clutch fliud level . Could be a faulty clutch master cyclinder in hydraulic system.

Jan 15, 2015 | 2002 Hyundai Getz

1 Answer

Why is the reverse Gear not working


you might want to use the recommended fluids sometimes its important to sounds like not running through the filter system right

Sep 23, 2014 | 2005 Hyundai Getz 1.6

1 Answer

How to align the timming marks of the cam-belt on my 1,4 Getz ?


Sorry but you have internal problems, when your belt broke it caused contact between the valves and pistons. The cylinder head will need to be removed and inspected what damage has been done.

Aug 03, 2014 | 2007 Hyundai Getz 1.4

1 Answer

How do I change the cambelt on a 2008 Hyundai Getz 1.4


with your eyes closed and one hand behind your back if you follow my smple instructions ,firstly remove no1 spark plug and bring it to TDC using a long thin screwdriver then drill a 10mm hole in the bellhousing to align with starter ring gear ,then tap it and make a long bolt with a point on the end by grinding it down but a put a nut on it first so you can back it off so the thread is ok ,then screw this into the hole to lock the flywheel ,now its safe to remove the front pulley bolt as this car is on a taper with no keyway on the end of the crank,then take the pulley off and this allows removal of the timing cover .Now a touch of white paint on the cam pulleys to the back plate ,slacken the belt adjuster and remove the belt ,then take of the adjuster and any idler pulley ,use a thin screwdriver to remove the thin seal ,drop into a drop of petrol and clean out best you can ,then a can of brake and clutch cleaner and spray teh bearing balls a bit ,shake dry light oiling with engine oil the repack with lm waterproof grease ,not the black grease for a drive shaft .Refit the seal then refit the idlers and put the belt on making sure the cams dont mose a pair of mulgrips help here to hold the belt to the cam gear .Once all on and tight refit teh covers and the front pulley then tighten the pulley bolt with a decent snap on knuckle bar of 80cms and a tube over the end as you need somewhere around 120lbs to stop the crank gear pulley wheel from turning on the taper as you what happens if this moves ,yes new valves ,simple isnt it ,also you will need a bottle jack with some wooden blocks to support the sump whilst you remove engine mounting wood under the sump or you will break it as its ally .Should take no more than two hours including tea break and a ciggy

Sep 05, 2012 | 2008 Hyundai Getz 1.4

2 Answers

Getz 1300 hAas new cam belt fitted but now there


The tensioner is NOT spring loaded - it's adjusted by the technician who installed it. Take it back and tell them to FIX IT!

Oct 01, 2009 | Hyundai Motor 2004 Accent

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

323 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...