Question about 2001 Chevrolet Silverado

1 Answer

I am doing a stero in a 2001 silverado with a 6.6l disel and there are 3 wires on the back of the factory stero the after market stero only have one will i need to wire the other 2 in

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 102 Answers

The best thing to do is use a factory wire adapter. The main wires you need to worry about are power, battery memory, ground and speaker wires. If you have a power antenna you will need to wire in the remote (normally blue or light blue). The only other wire should be an orange wire for the dimmer on the radio face. This one is not necessary for normal operation. Make sure you have the main 11 wires wired in. Ignition, battery, ground and the 8 speaker wires.

Posted on Apr 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hey needed wiring diag. for radio $ AC with all white wire


$ , and AC? and what is all white.
first off what are you doing, we dont know,
1: factory 01 radio for 01 swap?
2 factory 01 for 2010 swap factory?
3: after market to stock 01 harness?
but if #3 , which i suspect, then this is in the FSM read that.
or login to alldata.com
or go to walfart or any store that sells this (auto) and get
the factory harness kit, for your car, this has a real factory
connector on one end and wires to your new aftermarket radio.
this is best, and far better than hacking up any car harness.
(reSale-ablity)

Feb 04, 2014 | 2001 Toyota RAV4

1 Answer

Which color wire is the hot wire that goes to the car stero


Most likely the red one. black is ground yellow is memory.

Dec 23, 2013 | 2001 Buick Regal

1 Answer

If i replace my factory stero will steering wheel controls still work


probably not unless you get a unit that is designed to replace the faulty part as the factory fitted unit has the wiring built in for the steering controls.

Apr 05, 2013 | 2001 Pontiac Grand Am SE

1 Answer

2001 ford f350 disel starts by it self why


it has 2 b geting power 2 the starter soliond check power line 2 the starter 4 a bare spot hiting another wire it hase 2 b the wires going 2 the starter someware disels run hot and melt plastic coating if 2 close

Apr 04, 2011 | 2001 Ford F350 Super Duty SuperCab

1 Answer

What is the wire color code for a2001 malibu stereo. i would like to put an after market stero in?


if you havent taken the factory stereo out of the vehicle yet, if were you i would go to an auto store and buy wiring harness that plugs into your factory harness, that gives you all the colors to match up with your aftermarket... that way nothing gets cut on or messed up... and with the electical stuff linked to the stereo system, trust me you dont want a headache like that... a harness kit only cost like 15 bucks, plus if you ever wanted to get rid of the vehicle you could take your aftermarket stereo out, and plug the factory one right back in... hope this helps

Dec 10, 2010 | 2001 Chevrolet Malibu

1 Answer

2008 Dodge 3500 Quad cab need the colour for a switched power wire on the steering column to turn on an after market stereo


if you take factory radio you need a steering volume control module to work with it have to get one install by a qualifier stero technician

Oct 13, 2009 | 2008 Dodge Ram Pickup 3500

2 Answers

How do i hook up my after market radio


goto www.the12volt.com and hit the download section. has all the wires in there for ya.But your best bet is to buy a wiring kit. there about 8 buck at walmart or auto zone and with that you dont have to cut the factory wires. It always good to leave the factory wires in tact in case you sell the car then you can put the factory radio back in.

Oct 04, 2009 | 2001 Chevrolet Cavalier

1 Answer

Wiring after market stereo to factory wiring equipt with factory amp


you have to get the cable that conects your factory deck harness to the aftermarket deck, and that will allow you to use your factory speakers and amp, the wire harness is availiable at canadian tire or any stereo shop

May 05, 2009 | 2001 Pontiac Grand Am SE

Not finding what you are looking for?
2001 Chevrolet Silverado Logo

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...