Question about 2004 Ford Expedition

2 Answers

How do i turn off service light on 2004 exepedition after changeing the alternator.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Just pull the fuse for the computer count to 100 and replace it.

Posted on Apr 29, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Expert
  • 60 Answers

You can try disconnecting the battery for a few minutes, then reconnecting it. This will probably clear the alarm.

Posted on Apr 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn my fogs light on and service alternator light comes on


- Check the wiring harness for proper connections.
- Check for short circuits.

Feb 02, 2014 | 2004 Mercedes-Benz C230 Kompressor

1 Answer

2004 trailblazer changed alternator and when i turned on heat it started losing power lights flicker and now it seems to be running hot after a couple of mins of running and no service engine light or...


I'll try, sure its the right alternator? belt on tight ? did you do something different , are all connections correct, tight, not connected ? when you changed the alt, did you remove the ground cable from the battery first ? may have shorted something out. check your belt tension, maybe thats it. try all this first, you might need prfessional help

Jan 13, 2013 | 2004 Chevrolet TrailBlazer

1 Answer

Cruse control for my exepedition 2001 not working while prees


I was having all sorts of problems with mt Cruise Control. until I had my gearbox serviced.

Nov 14, 2011 | 2001 Ford Expedition

1 Answer

Tries to turn over but won't start. The service engine soon light now comes on and the battery light also. These did not come on previous and it has worked great. I got the oil changed a few weeks ago at...


Hello your battery light is an indication battery is not being charge cause your alternator , will cause the battery light check the belt is it is on and good boost and use a volt meter you should have 12.7 volts up to 13.79 if lower witch i strongly suspect you will need to change alternator and your battery all you can do is charge it and see if it will hold a charge when a alternator does what yours did it usually finishes the battery.Your check engine light you will need to have a OBD2 Scan completed to retrieve the engine fault to properly repair most garages charge $25.00 and up.

Jan 30, 2011 | 2004 GMC Envoy

1 Answer

Service engine light wont go off just came on two days after new alternator, belt, and oil change.


after you change the oil you need to follow these steps to reset your lite......turn the ignition to the on position (dont start it) depress the gas pedal 3 times. the service engine will flash and then go out. hope this helps

Jan 24, 2011 | 2004 Pontiac Grand Am

2 Answers

Reset oil change light on my 2004 Audi 1.8T


  1. Turn off the ignition
  2. Press and hold the button on the left side of the display while turning the ignition on
  3. Service OIL will be displayed
  4. Pull out the button on the right side of the display until the service prompt is cleared
  5. The display should now read ---
  6. If the above procedure does not work, outlined below is an alternative procedure:
  7. With the ignition off, push the right button
  8. Turn the ignition on and then pull the left button
  9. This should clear the warning message --- I have a 2002 A4 Quattro. To reset that Service message, hold down the service button. That's the one with the picture of a wrench on it. While holding it down, turn on the ignition. Let go of the service button and press the "Mode" button just to the right of the service button. It should clear the display.
* This does not work in older models, like my Audi A4 /1.6, 1995. It needs the cable and the program ( e.g. VAG-COM). Even with this, clearing the code (IN1 or IN2) is quite complicated.

Nov 13, 2009 | 2004 Audi A4

1 Answer

2004 Cavalier, Service light, ABS light, Trac Off light


Are you using a gel based battery?
Sounds like an overload on the charging system screwing the whole electronics of the car.
If not - get it diagnosed at a dealership.
Sorry.

May 28, 2009 | 2004 Chevrolet Cavalier

1 Answer

2004 Taurus Charging System Light


The light is for your alternator. When it comes on its saying your running at a discharge. Check cables first then have your charging system checked.

Dec 16, 2008 | 2004 Ford F150

Not finding what you are looking for?
2004 Ford Expedition Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...