Question about 2004 Dodge Durango
Open rear hatch. You can use a pair of needle nose pliers to pull the 2 plunger tabs up and out from the housing. Then pull the housing straight out. If you want to make it quicker, leave the connector connected. If you would like to set the housing on your work bench, take a small screwdriver and push the red locking tab until the side you're pushing on is flush with connector. Next, push the gray tab and pull the connector out. The next step will be to use a torx driver or bit (T-25 I believe) to unscrew the 4 screws. Then you can pull it apart to change the bad bulbs. Now you get to put it all back together!
Posted on Aug 25, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Posted on Feb 11, 2009
Wheel bearing should be permant packed. However if you wish to tackle the job. Remove the wheel, remove the cap, remove the carter pin, remove the bearings. Clean, repack new bearings and reasemble. But, before you do check with any auto repair shop or Dodge dealer, bearings may be permantly sealed.
Posted on Jun 28, 2009
Do you have a hitch on this vehicle? If so, check to make sure the line didn't come unplugged from the wiring running back the hitch wiring. You may ahve to drop the spare tire down to do this.
Posted on Sep 05, 2009
Tips for a great answer:
Oct 16, 2015 | Dodge Cars & Trucks
May 17, 2010 | 2002 Dodge Durango
Sep 18, 2009 | 1998 Dodge Durango
Aug 21, 2009 | 2004 Dodge Durango
Jul 29, 2009 | 2004 Dodge Durango
Jun 28, 2009 | 2003 Dodge Durango
May 25, 2009 | 2003 Dodge Durango
62 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: