Question about Ford Ranger

1 Answer

1994 Ford Ranger (2.3 Automatic) Headlights weren't working--we messed around with the fuses in the power distribution box to see if any were bad. Didn't see that any were--lights just started working again--the next day the transmission goes out completely--shift to drive--nothing--just revs

Posted by on

  • KK Apr 27, 2010

    Is it possible we could have messed with something we shouldn't have in the power distribution box which would have caused the transmission to go out?

  • KK Apr 28, 2010

    Where would I find the pressure switch solenoid fuse--is it in the power distribution box? Is there anything else I should check?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 14,036 Answers

HEADLIGHTS COULD BE BAD CONNECTION OR LOOSE WIRE. WIRE CONNECTION OR BAD DRL RELAY.CHECK TRANSMISSION FLUID LEVEL.IF FLUID AND FILTER HAS BEEN CHANGED CHECK THE MANUAL SHIFT LINKAGE ADJUSTMENT.IF ALL IS GOOD YOU HAVE PUMP PROBLEMS OR FORWARD CLUTCH PROBLEMS.SCAN TRUCK FIRST BEFORE SPENDING A LOT OF MONEY

Posted on Apr 27, 2010

  • Jonah Oneal Apr 28, 2010

    YOU COULD HAVE BECAUSE TRANSMISSION DOES HAS PRESSURE SWITCH SOLENOIDS THAT HAS FUSE.ITS POSSIBLE YOU COULD HAVE MESSED WITH A FUSE OR DISCONNECT SOMETHING TO TRANSMISSION.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Headlamp relay location 99 ford ranger


THE MAIN LIGHT SWITCH FUSE IS #11 IN THE POWER DISTRIBUTION BOX UNDER THE HOOD YOUR HEADLIGHTS HAVE SEPERATE FUSES FOR EACH LIGHT IF YOU GO TO 1999 FORD RANGER OWNERS MANUAL YOU CAN DOWNLOAD IT FOR FREE FROM FORD THIS WILL TELL YOU WHERE ALL THE RELATED COMPONENTS ARE AND YOU CAN PRINT IT OUT OR PUT IT DIRECTLY ON YOUR SMART PHONE SO YOU CAN BE AT THE TRUCK WITH IT STEPHEN

Feb 16, 2015 | Ford Cars & Trucks

1 Answer

Where is headlights relay located for 98 ford ranger xlt 3.0 4x4


There is a headlamp relay in the Power Distribution Box under the Air Filter box, mounted to the Air Box Plate

Feb 24, 2013 | 1987 Ford Ranger

1 Answer

Fuse box diagram for ranger 4x


Hi Don:
Accordting with the 2001 Ford Ranger Owners Manual, you have several fuse locations...

Passenger compartment fuse panel: The fuse panel is located on the left hand side of the instrument panel facing the drivers side door.

12_20_2011_4_22_30_pm.jpg


Power distribution box: the power distribution box is located in the engine compartment. The power distribution box contains high current fuses that protect your vehicles main electrical systems from overloads.

12_20_2011_4_23_21_pm.jpg


If you need details about each fuse description, I suggest to look the right Owners Manual.

Hope this helps and feel free to contact us in the previous links; also keep in mind that your feedback is important and will appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Nov 29, 2011 | 2001 Ford Ranger Regular Cab

1 Answer

2001 ford ranger fuse box identify


Hi Jose:
Accordting with the 2001 Ford Ranger Owners Manual, you have several fuse locations...

Passenger compartment fuse panel: The fuse panel is located on the left hand side of the instrument panel facing the drivers side door.

12_20_2011_4_22_30_pm.jpg


Power distribution box: the power distribution box is located in the engine compartment. The power distribution box contains high current fuses that protect your vehicles main electrical systems from overloads.

12_20_2011_4_23_21_pm.jpg


If you need details about each fuse description, I suggest to look the right Owners Manual.

Hope this helps and feel free to contact us in the previous links; also keep in mind that your feedback is important and will appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Oct 25, 2011 | 2001 Ford Ranger Regular Cab

1 Answer

I need the 2001 ford ranger supercab fuse box layout. what goes where!!!?


Accordting with the 2001 Ford Ranger Owners Manual, you have several fuse locations...

Passenger compartment fuse panel: The fuse panel is located on the left hand side of the instrument panel facing the drivers side door.

12_20_2011_4_22_30_pm.jpg


Power distribution box: the power distribution box is located in the engine compartment. The power distribution box contains high current fuses that protect your vehicles main electrical systems from overloads.

12_20_2011_4_23_21_pm.jpg


If you need details about each fuse description, I suggest to look the right Owners Manual.

Hope this helps and feel free to contact us in the previous links; also keep in mind that your feedback is important and will appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Jul 17, 2011 | 2001 Ford Ranger Regular Cab

1 Answer

I need the fuse box diagram, what fuse goes where for a 2001 ford ranger supercab


Accordting with the 2001 Ford Ranger Owners Manual, you have several fuse locations...

Passenger compartment fuse panel: The fuse panel is located on the left hand side of the instrument panel facing the drivers side door.

12_20_2011_4_22_30_pm.jpg


Power distribution box: the power distribution box is located in the engine compartment. The power distribution box contains high current fuses that protect your vehicles main electrical systems from overloads.

12_20_2011_4_23_21_pm.jpg


If you need details about each fuse description, I suggest to look the right Owners Manual.

Hope this helps and feel free to contact us in the previous links; also keep in mind that your feedback is important and will appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Jul 17, 2011 | 2001 Ford Ranger Regular Cab

1 Answer

Was driving a 1994 ford ranger and it died on me while driving and know it will not start back it will not turn over no lights nothing.....


If the battery is ok it sounds like a bad connection between the battery + and the power distribution box under the hood (that black box with a bunch of fuses in it). It's labeled as a black wire in a wiring diagram.

Jan 14, 2011 | 1994 Ford Ranger Supercab

2 Answers

I keep blowing the 30 amp max fuse. I don't know if it is to the ignition or the fuel pump.


look under the top of the power distribution box it has a diagram.
The max fuse blowing means you have a serious short,a hot wire touching ground perhaps it's broken or pinched somewhere.

Aug 12, 2009 | 1996 Ford Ranger SuperCab

1 Answer

I need a fuse box diagram for a 1992 Ford Ranger. Any idea where I could find one?


owner manual.

here's the big ones for 1994 ranger. all i have
Section 18-01: Wiring and Circuit Protection 1994 All Ranger, Explorer and Aerostar Vehicles Workshop Manual
SPECIFICATIONS Specifications

High Current Fuses And Circuit Breaker — Ranger 2.3L, 3.0L And 4.0L
Circuit Size Location Electric Fuel Pump 20 Amp Fuse Power Distribution Box Headlamp Switch Feed 40 Amp High
Current Fuse Power Distribution Box #36 Circuit Alternator Output #2 15 Amp Fuse Power Distribution Box Fuse Panel 60 Amp High
Current Fuse Power Distribution Box Power Locks 20 Amp High
Current Fuse Power Distribution Box #38 Circuit Alternator Output #1 12 Ga Fusible
Link Integral with 14305 W/A Powertrain Control Module and Power Relay 30 Amp High
Current Fuse Power Distribution Box 4x4 Electric Shift 20 Amp High
Current Fuse Power Distribution Box Ignition Switch Feed 60 Amp High
Current Fuse Power Distribution Box High Beams and High Beam Indicator 22 Amp C.B. Integral with Headlamp Switch Front Wiper and Washer 6 Amp C.B. In Fuse Panel Power Windows 30 Amp C.B. In Fuse Panel Cigarette Lighter, Flash to Pass and Power Lumbar 20 Amp C.B. In Fuse Panel


29af2f7.gif
e4cf291.gif

May 13, 2009 | 1992 Ford Ranger

1 Answer

2000 Ford Ranger


TEST B: BATTERY VOLTAGE OUT OF RANGE - DTC B1676
1. Check if vehicle has been jump started within past 2 weeks. If vehicle has been jump started, ABS is
okay. If vehicle has not been jump started, go to next step.
2. Using DVOM, measure voltage between positive and negative battery terminals. If voltage is 9-19 volts,
go to next step. If voltage is not 9-19 volts, diagnose charging system. See appropriate GENERATORS
article in STARTING & CHARGING SYSTEMS.
3. Turn ignition off. Disconnect 25-pin ABS control module. Install EEC-IV 60-pin Breakout Box (014-
00322). Turn ignition on. Measure voltage between breakout box terminal No. 20 and ground. If voltage
is more than 10 volts, go to next step. If voltage is less than 10 volts, repair Light Blue/Pink wire between
ABS control module and instrument panel fuse panel.
4. Turn ignition off. Measure voltage between breakout box terminal No. 25 and ground. If voltage is
greater than 10 volts, go to next step. If voltage is less than 10 volts, repair Red wire between ABS
control module and power distribution box/engine compartment fuse box.
5. Measure voltage between breakout box terminal No. 9 and ground. If voltage is greater than 10 volts, go
to next step. If voltage is less than 10 volts, repair Yellow/Light Green wire between ABS control module
and power distribution box/engine compartment fuse box.
6. Measure resistance between breakout box terminal No. 8 and ground. Also, measure resistance between
breakout box terminal No. 24 and ground. If both resistance measurements are less than 5 ohms, replace
ABS control module and repeat self-test. If either resistance measurement is greater than 5 ohms, repair
suspect Black wire between ABS control module and ground distribution.
NOTE: DTC B1676 will set if vehicle has been jump started.
2000 Ford Ranger
2000-01 BRAKES Anti-Lock - 4WAL - Explorer, Ranger & Mountaineer

Jun 11, 2008 | 2000 Ford Ranger SuperCab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...