Question about 2007 Dodge Ram 1500 Quad Cab Sport

1 Answer

Brake lights do not work,, rear blinkers out. Front blinkers are fast and i've already changed the bulbs and multi-function switch.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Check the electrical plugs under the bed,very back just behind the bumper should be a three way plug, make sure there not loose or disconnected.

Posted on Apr 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Left front blinker works fast, the rear not at all. Left rear brake light doesn't work, but the right one does


Fast blinkers are a result of a blown bulb. Based on your description the left rear bulb is burnt out.

Mar 24, 2016 | Cars & Trucks

1 Answer

How can I test the multifunction switch?


Its possible both brake bulbs are burnt out.
Rare, but a wiring issue to both rears.
try the hazards. if the hazards are same as brake lights you are in luck to test alot. if the brake lamps light up with hazards then you know your multi function switchis bad.

May 07, 2014 | 2005 Pontiac Montana SV6

2 Answers

Turn signal


because of no light flasher on left side the front one will go faster .maybe the left rear light is burn. and brake lights are control by the brake switch on brake pedal hardware, might be unadjust

Sep 12, 2013 | 2001 Pontiac Grand Prix

2 Answers

My brake lights and rear blinkers are not working. I have replaced the bulbs in both brake lights. What next?


most blinkers uses relays, and when they flashes fast one light is out, but you replaced your burnt bulb might be a bad relay.

Sep 17, 2012 | 2007 Hummer H2 SUT

2 Answers

I have a 94 Chevy C1500 and the right side brake light and blinker are not working. The tail light and reverse light work though, and the right front blinker works but it blinks twice as fast as it...


It could be a bad multifunction (turn signal) switch. The way that switch works, it is possible that it can turn on the front blinker and not the rear one. It also cancels the brake circuit so the turn signal can work with the brake pedal depressed.

However, a more likely cause would be a break in the YELLOW/BROWN wire at the rear of the truck. It is common for the connector to get corroded at the left rear frame area where the bed harness connects to the vehicle harness. If you have trailer connections spliced into the wiring harness, these connections are also prime candidates for corrosion. I would look there first. Inspect these harnesses thoroughly all the way up and into the tail light assembly.

If the wires under the back of the truck look good, then I would check for power coming out of the turn signal switch. The wire at the turn signal switch is plain YELLOW (with no brown tracer). It is Pin (M) on the turn signal switch connector. The front signal is a LIGHT BLUE wire at the turn signal switch Pin (H). If you probe these with a test lamp, they should both work the same except the yellow wire will be hot with the brake pedal depressed and the switch NOT in the left turn position. If there is no power at the switch connector, replace the switch.

May 13, 2011 | 1994 Chevrolet K1500

1 Answer

Changed multi function switch, bulbs, and passenger side rear light assembly (reverse, blinker, brake light). Everything works except the rear passenger side turn signal but the front passenger side is...


You have a bad connection at the rear passenger side turn signal. It is either the connection is corroded or a wire is loose on the ground side of the circuit.

Nov 11, 2010 | 2006 Dodge Ram 2500

1 Answer

2007 Ford Edge: Rear Blinkers/Brake Lights out; Not bulbs or fuse


Sounds like you need bulbs on both rear side lights. Does the blinker flassh really fast?

Feb 25, 2010 | 2007 Ford Edge SEL Plus

2 Answers

89 Toyota Pickup right turn signal doesnt work just buzzes


check all bulbs,inspect sockets for corrosion,rust ,or sighns of overload.follow wires and check connectors if all good ,replace the flasher ,,if that doesnt fix it ,the blinker switch in the steering coulmn would be next

Sep 22, 2009 | 1990 Toyota Pickup

1 Answer

Recentley my right rear blinker light went out I replaced it now brake or blinker is working front right blinks realy fast


The fast blinking means that the new bulb is not any good. Try putting in another bulb. If that does not take care of it, then it could be your blinker switch.

Aug 14, 2008 | 2000 Chevrolet S-10

Not finding what you are looking for?
2007 Dodge Ram 1500 Quad Cab Sport Logo

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...