Question about 1995 Dodge Ram

1 Answer

Dodge Ram 1500 4x4 year 1995 5.9 liter

Hi
I'm an unlucky owner of Ram 1500 4x4 year 1995.My problem:I have sobstitute 4 automatic transmission 518 46 RH and all had malfunction.Now my question.My last 5 transmission is a 518 46 RH with NUMBER 064-2 on bell and what's the right converter?My new converter has this number A 591......is the right converter?I think that my big problem is wrong converter so please let me know the exact number of righ converter.My Dodge vin number is 1B7HF16Z5SS307491.Please check and tell me the exact torque converter.Thank you

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 24 Answers

Most of the problems are caused by the converter. You must replace the converter when rebuilding or replaceiong the transmission. I knoe because I have several and that is the main problem, it goes out and damages the trans. I go with a heavey duty or bullit converter. I have several dodge rams with well over 300,000 miles anddo a lot of plowing and towing. I would order a heavy duty over the internet, not use the standard. Check with www.transmissioncenter.net or http://tpiconverters.com/

Posted on Aug 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What would cause my 1997 Dodge Ram 1500 5.9 liter transmission to blow out the front seal & fluid? Truck stopped movement shortly afterwards.


97 was a bad year for Chrysler transmissions. Most of these transmissions have already been replaced or rebuilt. My best answer is your are the victim of poor engineering among the many other owners that where in the same situation with these vehicles.

Apr 17, 2016 | Dodge Cars & Trucks

1 Answer

My 1995 Dodge Ram won't shift out of first gear,when it's put in 4wd.


Scan for a fault in PCM then diagnose, probably related

Mar 04, 2015 | 1995 Dodge Ram

1 Answer

How can I change my 3.0 Liter oil pan gasket


Hi, Im AL the owner of Big As Auto Repair.

I actually own a 1995 Dodge Spirit 3.0 and its not to difficult. The hardest part is removing the bracket on the transmission so you can remove the dust cover for the flywheel. (1) Drain the oil. (2) Remove the transmission bracket and the dust cover. (3) Remover all the pan bolts except one, just loosen this one so you can pry the pan off, because the pan will be stuck on. (4) Clean the engine block and the oil pan very clean. (5) Install the gasket OR sealer which ever it calls for and install the pan and fill with new oil and filter. Hope this helps and please visit my Auto-Repair-Website: http://www.bigasautorepair.com/

Apr 25, 2014 | 1994 Dodge Spirit

1 Answer

What automatic transmission is in a 1994 dodge van


Hi again,

Dodge RAM 3spd auto transmissions (RWD) available for the 3.9L engine were:

  • 3-Speed: A500 (42RH)
  • 3-Speed: A727 (36RH), Sportsman Model

  • If you can't find your model code on the transmission casing, the vehicle build plate (in the engine bay) should have the factory drivetrain code stamped on it.

    Failing this, Chrysler/Dodge should have your transmission details on their database.

    If you end up replacing the entire transmission, you might as well upgrade to the improved 4-speed. Most Chrysler/Dodge RAM transmissions were a universal fit, but some had stronger internal components to withstand the higher torque of the larger capacity engines.

    I've located a link which has more technical detail on the transmission:

    http://www.scribd.com/doc/228727/Dodge-Trucks-TechTran-A500-42RH-A518-46RH-A618-47RH-Service-Manual


    Cheers,


    "If this has helped you in any way, please rate this solution"

    Jul 02, 2010 | 1994 Dodge B Series Cargo

    1 Answer

    518 4X4 DODGE TRANSMISSION AUTOMATIC PROBLEM


    It couyld be several things, You need to find if there's a code stored in the computer for starts. Have you done work on the transmission? Is ther a check engine light on?

    Jul 01, 2010 | 1995 Dodge Ram

    1 Answer

    Will a 88 dodge van 5.9 liter transmission fit in a 95 dodge laramie 318 motor


    physically it will fit ,, but you run into problem with the fuel delivery and sensors because of the years difference,,, you will have to use the intake off the 95 but use 5.9 injectors and use all the sensors off the 95

    Apr 29, 2010 | 1995 Dodge Ram

    1 Answer

    DODGE RAM 1500 4X4 YEAR 1995 AUTOMATIC TRANSMISSION PROBLEM


    I don't know what you got going there, but most people would have shot that truck in the head along time ago, you must a lot of patience. 1, 10 to 12 liters is for a complete rebuild, you are only dumping out none, you should not have to ad any oil. Just check it with the dipstick.2 you have 2 oil coolers in the line, how did you manage that? in out in out? 3, Get the thing up there in line with the engine, move it in close, line up the bolt holes, get a couple bolts started, keep the tranny supported, so far so good, put in a cross member while it is still loose, don't tighten anything up yet, you are still aligning, get the flywheel spun around till a bolt lines up, remove 3 or 4 spark plugs and it will spin easier, put in bolt, then spin it around again to the next bolt and put it in, get all of them in before tightening them up, Now you can start tightening up all your bolts, cross members, drive shafts, hook up he shifter, electrics, speedometer, etc. You don't want any oil leaks, do not take out the torque converter, you will upset the seal. If it doesn't start, your neutral safety switch is out of align. You will have to loosen it up and move it just a fraction till the starter clicks on. Don't forget the spark plugs! Hope this helps.

    Mar 19, 2010 | 1996 Dodge Ram 1500 Club Cab

    1 Answer

    Oil spec


    1995 HONDA ACCORD 2.7L 6-cyl Engine Code C27A4 C27A1

    Engine Oil Grade 1......API All TEMPS......5W-30
    Manual Transmission,......SJ All TEMPS......10W-30, optional 10W-40
    Automatic Transmission,MPZA......AF2

    CAPACITIES:
    Engine, with filter..........4.4 liters
    Automatic Transmission, MPZA Initial Fill..........2.7 liters
    Automatic Transmission, Total Fill
    4 speed MPZA..........6 liters
    Manual Transmission, ..........1.9 liters

    1995 HONDA ACCORD 2.2L 4-cyl Engine Code F22B1 VTEC

    Engine Oil Grade 1......API All TEMPS......5W-30
    Manual Transmission,......SJ All TEMPS......10W-30, optional 10W-40
    Automatic Transmission,A0YA......AF2

    CAPACITIES:
    Engine, with filter..........4.3 liters
    Automatic Transmission, A0YA Initial Fill..........2.4 liters
    Automatic Transmission, MP0A Initial Fill..........2.4 liters
    Automatic Transmission, Total Fill
    4 speed A0YA..........6 liters
    4 speed MP0A..........6 liters
    Manual Transmission, ..........1.9 liters

    Jan 07, 2010 | 1995 Honda Accord

    3 Answers

    ATF Fluid Capacity for 2001 Alero


    2001 OLDSMOBILE ALERO 3.4L 6-cyl Engine Code [E]
    2001 OLDSMOBILE ALERO 2.4L 4-cyl Engine Code [T]

    Automatic Transmission,4T45-E......AF6
    Automatic Transmission,4T40-E......AF6
    Use Low Viscosity ATF, Hight Viscosity ATF or additives create fluid retention which cause the servos, solenoids to seize up causing shifting problems.

    CAPACITIES:
    Automatic Transmission, 4T45-E Initial Fill..........6.5 liters
    Automatic Transmission, 4T40-E Initial Fill..........6.5 liters
    Automatic Transmission, Total Fill
    4 speed 4T45-E..........12.2 liters
    4 speed 4T40-E..........12.2 liters


    Good luck and hope this helps.

    Dec 30, 2009 | 2001 Oldsmobile Alero

    1 Answer

    I have a 2006 Dodge Ram 2500 Diesel (no owners


    I don't have a owners maual either but I beleive its 10 liters.Use 15w40 ams oil with ams oil filter.7500-10000 miles for filter changes and 20000 miles between oil changes

    Sep 24, 2009 | 2006 Dodge Ram 2500

    Not finding what you are looking for?
    Cars & Trucks Logo

    370 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Dodge Experts

    yadayada
    yadayada

    Level 3 Expert

    75797 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22114 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8152 Answers

    Are you a Dodge Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...