Question about 1992 Chevrolet S-10 Blazer

1 Answer

Constant ABS light?

How do you get a code for an ABS light? I don't know what the problem is and the local auto parts stores can only pull OBD II codes.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Chevrolet Master
  • 2,100 Answers

The ABS light means that the system is not working any more. And it is expensive to fix. I would remove the bulb from the dash and ignore it. The brakes still work, just don't have anti lock any more. And considering the year of the vehicle, It is probably not worth fixing. But I will let you make that call. Hope this helps.

Posted on Apr 27, 2010

  • Bryan Stump Oct 31, 2013

    You can use a jumper wire on the OBD II port to reset the ABS system. I did and it worked great. Buy a Chilton book on your truck at O'Rielly Auto parts and it has the method.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I clear check engine light

The check engine light is set by the onboard computer detecting a malfunction or out of tolerance condition. The code(s) can be read with an OBD-II scanner. Once the condition(s) that cause the codes are repaired, the code can be cleared with the OBD-II scantool. You can purchase these tools at local auto parts stores. Be careful though; the cheapest ones will only read the codes, but cannot reset the Check Engine Light.

Jan 13, 2015 | Cars & Trucks

1 Answer

04 expedition, abs light come on only in cold weather and abs doesnt work

Do you have an OBD II scanner to read the Diagnostic Troubleshooting Code?

If not, visit your local Pep Boys, NAPA, or Auto Zone parts store; they have readers you can buy, rent, or test for you on site. They'll even guide you to possible repair solutions

Dec 08, 2013 | 2004 Ford Expedition

1 Answer

ABS Sensor Light is on

Disconnect negative wire to battery for 5 minutes, reconnect wire. Drive, park vehicle 3 times 5 - 8 miles each time to reset codes also. Many auto parts stores wil test OBD II codes and rest for free.

Jan 28, 2012 | Cars & Trucks

1 Answer

ABS and traction control light come on at random times, both while driving and while braking. Shop found a code saying a bad front driver side sensor so I replaced it but the light still comes on. When the...

Have you taken this car to Advance Auto Parts store or a dealer to see if any codes come back up again ? If you take this to either place should tell you if there is any problems with any codes again. It could be anything from wires becoming short to your ABS system to the pump or cylinders that helps push the fluids to your brakes. So go and have Advasnce Auto Parts store check it out for free with there OBD II code reader and then reply back here so we can show you what is going on. Thanks

Jun 16, 2011 | 2007 Chevrolet Monte Carlo

1 Answer

I have a 1992 Plymouth Grand Voyager with the 3.3L V6. The 'MAINT REQD' light has been on for months. I can't get the ignition cycling to give me a code readout. I don't if I'm doing...

When the Check Engine Soon Light comes on , your first instinct is to pull over and check out the situation. This is not necessary. This is the vehicles way of letting you know at its earliest stage that an error has occurred. No need to panic. If you have been driving with that all annoying light on, remember this : Your gas mileage will improve if the necessary repairs are made.

The first thing to do when your "Check Engine Soon" light comes on is to determine the immediate cause. Consider if the vehicle is still performing as usual or if a loss of performance is noticeable. Generally a constant illuminated light without loss of performance points to an emissions related issue( this won't leave you stranded). When the light flashes, this indicates a serious engine failure condition and will require immediate attention. You may wish to take your vehicle to a local shop and have Computer Diagnostics performed. Usually costs under $100.00.

Generally all vehicles from 1996 and up have an OBD II computer. The Major problem when it comes to OBD II is that you can no longer acquire the trouble codes by counting the flashes of the Check Engine light like you could on earlier OBD I vehicles. You can take your car into a local high-tech service shop, where the minimum charge for computer diagnostics and engine diagnostics might cost you somewhere into three digits. Or you may want to learn about OBD II systems. in order to do so you will need an OBD II scan tool. I have already done the research for you and located several different scan tools for you to choose from. If you already have the code and need to know what it means check out our complete list of OBD II Codes Here.

OBD II scan tools connect to the vehicle's computer through a connector under the dash by the steering wheel.


May 19, 2011 | 1992 Plymouth Grand Voyager

3 Answers

What does it mean when my 2003 honda pilots check engine light comes on?

Hi, the check engine light will require you to have the engine CPU scanned for trouble code's. This can only be administered with the assistance of a diagnostic computer scan tool OBD II. You can purchase this tool, at your local auto parts store, or you can just have the scan ran at your local auto zone parts store, free of charge. Once the diagnostic scan is administered, you will be able to isolate the issues that have caused the check engine light.
This scan tool will display a print out code and the location of the issue, on the engine, as well. There are Many issues that will cause the engine light to illuminate, but the most common cause will be a failed monitoring sensor, or sensor harness failure(separated power wire, or ground).
After retrieving the code, it will be interpreted to know what caused the lights to come up and that will be used to fix the problem.

Dec 26, 2010 | 2003 Honda Pilot

1 Answer

A light is flashing on my dash. The light is ABS. What does that mean?

Hello! There is a trouble code stored in On Board Diagnostic (OBD)
II...Take the vehicle to an auto parts store and have them scan for the code...Here is a list of ABS trouble codes...Guru...Saailer


Oct 04, 2010 | 1997 Ford F250 SuperCab

2 Answers

1999 saab 95 speedometer not working, abs and check engin light comes on

You will need to have your car's ECM (Computer) read by a OBD II scanner to determine what Trouble Code your ECM is giving so a mechanic can properly diagnose the problem. You can go to your local AutoZone store and they can pull the codes out of your ECM for no charge.

Jun 04, 2010 | 1999 Saab 9-5

1 Answer

I get the OBD-II codes of P0325 and P0326. I did a search and I found this site which explains about the knock sensor circuit malfunction. Is the knock sensor, which I read...

Your local auto parts store, or auto parts superstore should have it, if not, be able to order it. Ex.--Advance Auto Parts store has a BWD Knock Sensor, #S8815, for around $50.00. 2002 Kia Rio 1.5L/L4/FI

Apr 02, 2010 | 2002 Kia Rio

1 Answer

Check engine light on, gas cap tight

Because this is a 1996, it's got a standard OBD-II computer. Take it to any auto parts store and ask them to read the trouble code for you -- every major parts store (Pep Boys/Autozone/Checker/etc) will do it for free.

Your OBD connector is behind the ashtray in the center console -- pull the ashtray out, then push down on the metal part at the top to release it and pull it the rest of the way out of the console.

If you generally do your own work, you might jump on eBay and look for an OBD-II code reader. I got mine for $25 including shipping. It's nothing fancy, but it's saved me a few trips to the parts store place.

Oct 11, 2009 | 1996 Honda Accord

Not finding what you are looking for?
1992 Chevrolet S-10 Blazer Logo

Related Topics:

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides