Question about 2005 Dodge Caravan

1 Answer

How do I get access to change rear turn signal bulb?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Open the back hatch, inside the jamb there will be two screws remove them and then pull the taillight directly back.

Posted on Apr 27, 2010

Testimonial: "Thanks! Got her done!"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change turn signal lights


REAR UNSCREW THE UNIT PULL IT OUT TWIST THE PART THAT HOLDS THE BULB HALF A TURN PULL IT OUT REMOVE BULB REPLACE WITH SAME NUMBER BULB.

FRONT BULB CHECK TO SEE IF YOU CAN ACCESS SIGNAL FROM BEHIND UNDER THE HOOD. IF NOT REMOVE THE LENS BY REMOVING THE SCREWS AND ACCESS THE LIGHT THAT WAY. PUSH THE LIGHT BULB AND TWIST IT IT WILL POP OUTBECAUSE IT IS SPRING LOADED. ALWAYS MAKE YOU SURE YOU CHECK THE NUMBER ON THE REPLACEMENT BULB TO AVOID HAVING TO DO THE JOB TWICE/

Mar 01, 2014 | 1996 Dodge Dakota

1 Answer

How do I change front blinker bulb on 2003 chev impala


First,
  1. Turn the engine off and open the hood. Pry up the two fasteners from the radiator air baffle with a flat head screwdriver. Move the baffle to the side to access the top of the headlight case.
  2. Step 2 Pull up the two metal rods behind the headlight case. These secure the case to the car. You may need your pliers to pull them up.
  3. Step 3 Gently pull the headlight case out to access its rear. On the rear, you will find several black dust covers. Twist off the dust cover closest to the fender (the outward dust cover) to access the turn signal bulb.
  4. Step 4 Turn the bulb module counterclockwise to release it. Unplug the electrical connector from the bulb module. Connect the new bulb to the electrical connector (don't touch the glass with your hands; hold it by the plastic piece). Insert the bulb module in the turn signal housing, turn it clockwise and screw the dust cover back on.
  5. Step 5 Insert the headlight case in the mount. Push the pins back down to secure it. Position the radiator baffle in its place and insert the fasteners.
  6. Rear Turn Signal Bulbs
  7. Step 1 Open the trunk. Remove the net from the side mounted wing nut (on the side with the faulty turn signal). Twist the wing nuts (there are two per side) counterclockwise to remove them.
  8. Step 2 Peel the carpet layer back to access the rear signal lamp wing nuts. Twist these wing nuts (two per side) counterclockwise to remove them and release the rear signal.
  9. Step 3 Carefully pull the rear signal assembly away from the Impala. The rear turn signal is the inner bulb (closest to the trunk). Press the tab on the bulb module and turn it counterclockwise to release it from the rear signal assembly.
  10. Step 4 Pull the old bulb straight off the module (don't twist). Insert the new bulb in the module. Depress the tab on the connection and insert the module back in the assembly. Twist it clockwise.
  11. Step 5 Insert the rear signal assembly. Re-attach the assembly's wing nuts and push the carpet layer back in place. Tighten the other two wing nuts to secure the carpet layer and reconnect the cargo net

May 09, 2010 | 2003 Chevrolet Impala

1 Answer

Rear turn signal how to change bulb


open the liftgate remove the screws holding the tail,stop,turn signal and back-up light assembly to the rear door opening. seperate the light assembly from the vehicle body. disengaging the hook holding the outer end of the light assembly to the body. swing the housing out to access the bulb holders. rotate bulb holder and remove blown out bulb. installation is the reverse of removal. hope this will help!!!

Apr 03, 2010 | 2005 Dodge Grand Caravan

1 Answer

Turn signal lamp is inside of headlamp housing


you want to change the turn signal light? front yes to what ever side you need to change the access is to the back of the head light assy. Front Turn Signal Light Bulb Size: 1157A
Rear Turn Signal Light Bulb Size: 1157
check too owners manual will show you how to thanks Lee let me know how it goes thanx

Dec 26, 2009 | 2003 Ford Crown Victoria

1 Answer

How do I access the rear turn signal bulb?


Most likely, open the trunk/rear hatch, look near where the light is, you might have to remove some covering and then you should see some screws.

Oct 19, 2009 | 2008 Ford F 250 Super Duty 4WD

1 Answer

How do i change rear turn signal bulb on 89 corvette, notmine???


Rear Turn Signal, Brake and Parking Lights 1984–89 VEHICLES
  1. If removing an inner bulb, remove the license plate. For outer bulb replacement, reach from under the vehicle.
  2. To remove the inner rear brake light, you must reach behind the license place and under the vehicle to access the bulb and socket
  3. Remove the socket from the lens by releasing the locking tab and twisting
  4. Once the bulb and socket are pulled from the rear of the lens, grasp it from behind the license plate opening
  5. Then, pull it out of the side and replace the bulb
  6. Remove the bulb from the socket and replace.
  7. Installation is the reverse of the removal procedure.

Apr 05, 2009 | 1989 Chevrolet Corvette

2 Answers

No rear turn signals, front turn signals light but dont flash


bulbs might look good but it dont mean they are. I suggest changing the bulbs.

Jan 17, 2009 | 1999 Cadillac DeVille

1 Answer

Rear turn signal bulb on a 2001 Chevy Monte Carlo


Its Accessed Through The Trunk Pop It And There Will Be Either A Panel To Remove Or Carpeting Material To Move Aside And You'll See The Wiring Harness With The Light Twist And Pull To Get The Bulb You Want Out.

Jan 16, 2009 | 2001 Chevrolet Monte Carlo

1 Answer

Rear Light Bulb Replacement


unfortunately you will have to remove the assembly to get to the bulbs

Jan 08, 2009 | 2001 Buick LeSabre

1 Answer

Replacing rear turn signal bulb in 2003 Mustang


remove the trim panel at the very rear of trunk, remove it and place it out of the way, remove tail light Assembly retaining nuts top and bottom, I think there are 6 per side, pull the tail light assembly straight back to access the bulbs for replacement.

Dec 04, 2008 | 2003 Ford Mustang

Not finding what you are looking for?
2005 Dodge Caravan Logo

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...