Question about 1994 Chevrolet Corsica

2 Answers

My signal lights no longler flash in my 94 corsica. when i turn them on they just stay on and don't flash. no lights are burnt out, and my hazard lights still work and flash. is this all on the same flasher? aslo we could not find the flasher in the car. where would this be located?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

You can find it easily I just did mine take off the kick panel on your drivers side under the steering column and right above the brake pedal and gas pedal get a hand held mirror and look you will see a gray box right above the computer connector you will see a pink chime box a flasher for hazards and a relay a white box my turn signal flasher was behind this gray box I pulled on a wire and the flasher is attached to these wires with a black connector use a flathead screw driver to pry it up off and put in the new.

Posted on Sep 14, 2012

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Under the dash to the right of the steering wheel as you are on your back looking up, hazards and blinkers have seperate relays there will be a round aluminum/plastic relay and a rectangular white and black one, if in doubt replace both. Otherwise the next fix could be the multi-switch

Posted on May 18, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hazard lights malfunction


YOU MIGHT HAVE A BURNT OUT RELAY IN FUSE COMPART UNDER YOU CARS HOOD CHECK THAT OUT THRU YOUR CARS MANUAL,IT WILL SHOW YOU WHICH RELAY IT IS?

May 24, 2013 | Cars & Trucks

1 Answer

Turn signal lite up but do not flash I have replaced the blinker fuse and the turn signal assembly in the steering colum and thy still do not flash


Do the hazard lights work when switched on? If so it's most likely the flasher unit for the indicators is faulty or the hazard warning light switch

Mar 02, 2013 | 1993 Chevrolet Corsica

1 Answer

My turn signals and my Hazard Lights stays on but dont flash problem?


FLASHER device go to bad, replace it in order to solve.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Dec 28, 2011 | Cars & Trucks

2 Answers

My 2008 Chevy Cobalt coupe has a passenger side turn signal that flashes fast on the instrument panel. However, no turn bulb is burnt out in either the front or rear. The rear passenger turn blub just...


It is as simple as your hazzard switch needs to be replaced yes your hazzard switch as now turn signals are built threw the hazzard switch my PT Cruiser had same problem as my s10 replaced hazzard switch fixed the problem

Aug 18, 2011 | 2008 Chevrolet Cobalt

1 Answer

I don't know where the signal light flasher is located the signal lights don't flash


Your vehicle has 2 flasher relays. One for the turn signals and one for the hazard lights. The turn signal flasher relay is located on the drivers side, under the dash, mounted on the drivers (Left) side of the steering column. The hazard flasher is mounted on top of the steering column. Do not get them mixed up.

Aug 12, 2011 | 1991 Chevrolet Corsica

1 Answer

Signal lights have power and work will not blink when indicator is on light stays solid and hazards light do same.


that is usually an indication of a burnt out bulb in the turn signal/hazard lights. the other possibility may be a bad flasher. Check all the running, blinker and hazard lights by turning them on one at a time and walk around the car looking for burnt out lights.

Aug 17, 2010 | Toyota Camry Cars & Trucks

1 Answer

Signal lights stay on


Its common for the sockets to burn up.  If you installed and the lights are still coming on.  The issue is the hazard light switch is bad.  If it were me I would replace the burnt socket anyway since it has been damaged and replace the hazard lite switch too.

Mar 19, 2009 | 2000 Audi A6

1 Answer

Electrical problem


Find the ground wire on one of the lights and add another ground wire to a good clean metal surface and see if that fixes the problem. It defently sounds like a ground problem at one of the lights.

Jan 07, 2009 | 1983 Chevrolet Caprice

Not finding what you are looking for?
1994 Chevrolet Corsica Logo

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...